Avaliação da influência da taxa de resfriamento posterior ao tratamento térmico nas propriedades mecânicas do aço API 5L X70

In this work a study about the mechanical properties of the API 5L X70 steel, with or without heat treating, has been made, with the intetion of assess the influence of cooling after the austenitization heat treating by air cooling (normalizing) and a rapid cooling with oil (tempering). This steel is known by high strength and ductility values and it is commonly used in the manufacture of oil pipes. The growing energy demand encouraged the study and manufacture of this material. Although this microalloyed dispense subsequent heat treatings, it was proven that its implementation is very advantageous for this type of application, improving hardness and plastic stability. It was also assessed that the faster the cooling rate is, the better will be these properties

Diagnóstico ambiental de atividades de mineração com ênfase em olarias no município de Rio Claro (SP)

The environmental diagnosis of any area affected for mining activities contributes in a positive form for the analysis of the characteristics of the environment, biological and social, thus being able to establish control parameters. The clay extration for red ceramics promotes the environment degradation as any another one cultivates of mineral goods, but in lesser scale, which had to the dimensions of potteries. Being thus, some decurrent environment characteristics of the clay extration had been inquired clearly used for potteries located in the city of Rio Claro, SP. For this, the followed method was the cadastre of these areas and potteries in created tables, searching, with this, the contribution for the involved people in the extract activity of related potteries and the facilitation in the visualization of the main problems, necessities and proposals for each one. It could be perceived that the environmental diagnosis of the areas had in common presented referring points to the places where if they find the activities. The same ones are located in the region the northwest of Rio Claro and well next one to the others. Moreover, they have in common, referring characteristics to the process of manufacture of bricks. In common, all the responsibility for the administration and course of the activities competes to the proper families, since the administrative part, even though to the process of manufacture of the bricks. Moreover, from the comment of the areas through field work, the prominent use of diverse areas in the region for the clay extration is noticed, making with that the region has great importance in the regional scene.

Estudo em fadiga no aço API 5L X80 soldado pelo processo HF/ERW

The technological advancement in order to improve the methods of obtaining energy sources such as oil and natural gas is mainly motivated by the recent discovery of oil reserves. So, increasingly , there is a need for a thorough knowledge of the materials used in the manufacture of pipelines for transportation and exploration of oil and natural gas. The steels which follow the API standard (American Petroleum Institute), also known as high strenght low alloy (hsla), are used in the manufacture of these pipes, as they have, with their welded joints, mechanical properties to withstand the working conditions to which these ducts will be submitted . The objective of this study is to evaluate the fatigue behavior in microalloyed steel grade API 5L X80 welded by process HF / ERW . For this, axial fatigue tests to obtain S-N curve (stress vs. number of cycles ) were conducted. To complement the study, it was performed metallographic , fractographic , Vickers hardness tests and tensile tests to characterize the mechanical properties of the steel and check whether the values satisfy the specifications of the API 5L standard . From the fatigue tests , it was concluded that the surface finish influences directly on the fatigue life of the material

Redução do tempo de ciclo baseado na produção enxuta em uma rémontagem de tubos de freios e combustível

In today's competitive environment of automakers, it is essential to obtain the highest efficiency of the production process. This paper presents a study in a pre-assembly of brake pipes and fuel of a vehicle where the value stream maps and information (VSM – Value Stream Mapping) were designed in order to improve the process by reducing the Lead Time Production of a product, reducing waste and decrease time between processes. This work can be divided into three stages, the first building the VSM of the initial state, the second VSM of the proposed state and finally the VSM than was actually performed and to present the gains were achieved effectively. The proposed VSM would lead to a gain of 54% in lead time and 61% in processing time, since the VSM implemented had gains of 47% in lead time and 48% in processing time even without major investments as originally proposed. Concluding that even without big investment, using the techniques of lean manufacturing is possible to achieve high levels of process efficiency

Purificação do brometo de tálio pelo refino zonal e análise da segregação das impurezas

Desde o conhecimento da radiação e seus efeitos a necessidade de mensurá-la intriga os cientistas. Os detectores de radiação mais difundidos atualmente fazem o uso de cristais semicondutores. Porém, esses detectores tem uma temperatura ótima de funcionamento que acaba sendo ultrapassada, já que o processo gera calor. Por isso, o resfriamento acaba sendo uma necessidade. O desenvolvimento de detectores de radiação com cristal semicondutor que opere a temperatura ambiente é tema de muitos estudos, já que evitaria o processo de resfriamento, trabalhoso e de alto custo. No Centro de Tecnologia das Radiações (CTR) do Instituto de Pesquisas Energéticas e Nucleares (IPEN) o sal de Brometo de Tálio (TlBr) é estudado para esta finalidade. Até ser um cristal semicondutor este sal deve passar por vários processos, entre eles o de purificação e o de cristalização. A técnica utilizada para purificar este cristal é a de Refino zonal. Após ser purificado por esta técnica o sal estará apto a ser cristalizado e consequentemente integrar um equipamento de detecção de radiação. Portanto, esta monografia teve como objetivo realizar a análise da segregação das impurezas do sal de TlBr através da técnica de espectroscopia de massa em fonte de plasma induzido (ICP-MS) e espectroscopia de emissão atômica (ICP-AES). Determinando assim se o mesmo está apto a ser cristalizado e vir a compor um detector de radiação

Processo de esmerilhamento, polimento e caracterização de um Shear Plate

Shearplate is an optical glass plate having two flat surfaces and a small angle between them. The use of a high quality shear plate is essential to implement shear interferometric technique . The shear interferometry is a technique used to evaluate the light beam collimation. In order to guarantee the shearplate quality , the complete manufacturing process must be thoroughly monitored. In the manufacturing process, the first step consisted of the glass selection. The selected glass has been submitted to the process of cutting, gluing, chamfering, grinding and polishing. Each phase has been strictly monitored. The quality of the final result depends extremely on an appropriate starting condition, which arises from the grinding process, as the polishing process only recovers the brightness of the part, acting on a small scale on the wearing off of the part, as well as not changing the structured obtained in the grinding process. Respecting all stages of the manufacturing process, the quality of the part has evolved to a good result. The best result obtained showed PV distance of 162 nm, slightly less than λ / 4. This result is significant because the dimensions of the piece with respect to the dimensions of the polisher what interferes directly in the results. The closer are the dimensions of piece and the dimensions of the polisher, the greater the difficulty in controlling the propagation of errors

Geração de energia elétrica a partir da concentração solar

The current world's need for clean and renewable energy sources aligned with the strong Brazilian growth looking to diversify its electric power generation sources, highly dependent on hydropower and petroleum encourages the implementation of technologies that reach this growth with diversity and cleaning. The sun energy source is considered inexhaustible and can meet the demand for energy through thermo solar plants to generate electricity. Several technologies are being studied and developed in the world and they can be used to generate electricity from the solar concentration, but in Brazil its use is still not found commercially. It is therefore essential to understand these technologies and develop knowledge about them so they can be implemented in Brazil. This work brings an overview of the thermo solar generation in Brazil, showing the different technologies and a thermodynamic simulation of one of such technologies considering a hybrid plant with complementary generation biomass, aiming at the generation of 1 MW in the Brazilian Northeast

Caracterização microestrutural de junta soldada com arco submerso e análise da propagação de trincas em um tubo de aço API X 70

In this work a study of an API 5L X70 steel, which is used in the manufacture of oil and gas pipelines, has been made. This class of steel show high strength and ductility values, and has been increasingly studied due the growing demand of oil and natural gas, which in consequence, increases the needing of new pipelines to transport them. The material studied has been directly taken from a tube provided by TenarisConfab, and a special attention has been given to the fatigue crack growth rate study, which proved that a crack will grow at different rates according to the tube position where it is growing

Braquiterapia com sementes de iodo-125: manufatura e tratamento

According to the National Institute of Cancer – INCA, 466.730 new cancer cases will occur in Brazil in 2009. Prostate and Lung cancer in man are the most incident types (in exception of the non-melanoma cancer). The brachytherapy with 125-iodine sources is an important method of prostate cancer treatment. The implant with iodine-125 seeds uses aproximately 100 seeds that are imported impossibilitating the treatment in large scale. For this reason, a multidisciplinary group was created at the Energetic and Nuclear Research Institute – Radiation Technology Center (IPEN –CTR / SP) to develop a national 125-iodine source and established a facility for local production. The seeds manufacture in Brazil will diminish the cost of treatment and prostate brachytherapy will be offered to more patients. This work aim is to observe and discuss the methods used in seeds manufacture there are being developed in Brazil and to present an prostate cancer case folloied in A.C. Camargo Hospital. The 125-iodine is adsorbed in an silver wire, then deposited at titanium coat. The weld is made by an process of plasm sealing. The seeds goes through several test to guarantee that there is no leakage. The result is an high quality and cheaper product. The implant tecnique is an fast and save procedure. The medical physicst preplan the case to stipulate the quantity of seeds there will be used. At the dat of the implant the medical physicst replan the procedure due to changes of volume in the organ. That assure the correct dose distribution in the target. Besides, the 125-iodine low energy is absorbed at the volume of interrest saving sourronding healthy tissues such as the rectum and the urethra

Viabilidade do aproveitamento de resíduos de madeira para produção de móveis

The need to use waste from wood processing industry grows due to environmental demands imposed by laws, so like the need to introduce more competitive products in the market (it means better quality and acceptable cost) who must submit by the rational use of raw material, usually turning waste to sub products, what adds higher value for that. To this research, specific case from Ribon Company, located on Camaçari, Bahia-Brazil, has been studied. It is a treated wood producer. Bulk of monthly wood logs there is 70 m3. Its yield is 71,43%, where bulk of generated waste is monthly 20m3. As an exploitation way from generated waste, it has been suggested some options like: erosion protection to specific areas, a wildlife shelter as an henhouse etc, recreational articles, coal, linings, treadmills. However this research will give focus to the furniture design made of waste. As a conclusion, there is very much need to assign new utilizations to that sub used materials, since there is significant amount to increase company’s productive yield

Processamento de peças em materiais compósitos para o projeto BAJA SAE

The weight of a vehicle has always been considered an extreme important factor, because it interferes in the performance, steering, consume, environmental impact, wear of components, among the others. Because of the new demand, consume reduction aim and gases emission increased the necessity to manufacture lighter vehicles, guaranteeing the complying with the gas emission international law. Besides the legal demand, the low weight will certainly be essential for the competitiveness for the next generation of vehicles. It is with this thinking the composite materials have been introduced in the automobilist industry, because those materials show an excellent relation of strength/weight, providing a reduction of consume and the increase of load capacity. Those factors justify the increase of interest of industry and the necessity of optimization of those materials and of their process. For this research, the field of application will be the Baja SAE Project, a project that is fully developed by engineering students, where they build a prototype single seat, off-road category, for use on hilly slopes with obstacle. This research aims to study two key components of the prototype are made of composite materials, analyzing all the processing. In addition, there is the analysis of the viability of this production parts to a Baja SAE vehicle, in order to increase their performance and reduce their weight without reducing the safety and robustness of the prototype. It was possible to achieve weight reduction of the steering subsystem with manufacturing the flywheel hybrid composite (carbon/glass) and the replacement of SAE 1010 steel by hybrid composite (carbon/aramid) in CVT box. The importance of this study is to obtain a good project for the vehicle of technical and scientific manner, contributing to the know-how to the team and providing a basis for optimization for upcoming projects

Manual de procedimentos técnicos para manutenção preventiva em empilhadeiras na área de prestação de serviços

The service area is in full development in the world, and it is proven the benefits of outsourcing services to large companies, which deliver services and manufacturing experts can focus only on production of their products. In the case of cargo handling is no different, many factories hire specialized companies to reduce fixed costs and factory overhead. And with the intense competition in the market, service providers are increasingly seeking to reduce costs in order to offer services at competitive prices. So if we see a growing need to train its employees to perform services faster and with better quality. In this work, will be a handbook of technical procedures for preventive maintenance, as well as a catalog of parts required to perform the same for Toyota 8 Series forklifts. Will be developed also tools to control and carry out the preventive maintenance of these trucks, such as Check-list and a manual of tools needed for each procedure. The results show that service quality has improved considerably and the cost of wrong parts decreases more than 15%

Redução do tempo de setup de máquinas de usinagem em uma industria automobilística

Continuous improvement of industrial processes is one way to become companies more competitive in the market. For this, a fairly widespread use is the methodology of lean production systems, by eliminating waste. One of the tools of these systems is the method of rapid exchange of die or also called SMED, which will be applied in this study. The study aims to develop proposals for reducing the time of set up of two machines in two machining lines, watching also the ergonomics and safety conditions in this operations. The set up time reduction is justified among others, due to increase the machine productivity. In applying the connecting rod machining line, there were two types of exchange. Reductions in time to set up proposals reached values of 47% to one of them, and 55% to the other. It is important to underline that to reach this result, there was no need for large investments. In the application in block machining line, was developed an improvement in the ergonomic area. It was placed a pulley block that came to increase the time of tool change. Aiming to improve the security of the exchange, without productivity loss, the method was applied to reduce this time. It was developed two proposals.: the first would reduce that time by 19%, and does not require many resources of the company. The second involves the parallelization of the exchange, so that the reduction is 48%. However, this proposal requires one more manpower at the time of exchange and it is not always possible

Redução de tempo de setup de uma máquina de encartuchamento pela técnica SMED

Currently the market requires companies to adapt for they can have the lowest possible cost in their manufacturing, be it a good or service, thus obtaining a greater profit. For this profit the Toyota Production System applies lean manufacturing practices actions with reduced spending, smaller lots and stocks, generated by market demand. The technique allows SMED with few actions, changes and investments that time does not exceed one digit on your total time. This case study shows that only with standardization and use of inexpensive improvements, could reduce setup time on a machine for 70 minutes to time of approximately 48 minutes with little investment, demonstrating the viability of the tool presented

Avaliação da tenacidade em um aço microligado, grau API, para aplicação em linhas dutoviárias de petróleo e gás

In order to study the mechanical properties of micro alloyed steel API 5L X70, a material used to manufacture pipes for pipeline transportation lines for use in oil and gas, a study was made of toughness, tensile strength, impact strength, hardness and microstructure steel. To perform these various tests were made where they can acquire the characteristics of the material. Were performed at the Faculty of Engineering in Guaratinguetá in the Department of Materials and Technology and the tensile tests, Charpy impact test, metallography and hardness testing of material API 5L X70, all tests were done with the help of technical laboratories. With these data can be an analysis of the material about his tenacity, his toughness and fragility, its hardness, its yield strength and its maximum voltage. After being asked the analyzes discussed the results showed that the micro alloyed steel API 5L X70 steel is a very tenacious, it absorbs impact energy of 300 Joules though without a break for the full body of evidence showing its tenacity