Microfluidic electronic tongue

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito da fermentação fúngica no teor de compostos fenólicos em casca de café robusta

Coffee husk is an abundant by-product generated by the coffee industry and it can be used for the production of-value-added phenolic compounds. Currently, this residue has no commercial use due to the presence of anti-nutritional compounds and it is returned to the soil or burned. The aim of this study was to evaluate the content of phenolic compounds in Robusta coffee husk, the adequacy of this residue as substrate for fermentation processes, as well as evaluating the influence of fungal solid state fermentation to obtain phenolic compounds from this residue. In the present study, the use of different solvents for the extraction of polyphenols was evaluated and the content was found to be in the range of 96.9-159.5 mg of galic acid (GA).g(-1) substrate, depending on the solvent used. The best solvent was acetone, therefore it was selected for extraction. Studies were carried out to evaluate the effect of solid-state fermentation in the release of phenolic compounds, using the filamentous fungi Penicillium purpurogenum. The total phenolic content increased from 159.5 up to 243.2 mg GA.g(-1) substrate as a result the solid-state fermentation.

Growth and reproduction of earthworm in organic waste mixtures and effects on chemical and microbial properties of vermicompost

There is a large demand for organic fertilizers in organic agriculture, but few options for different wastes have been studied. The aim of the present work was to evaluate the biological responses of earthworms Eisenia andrei Bouche in wastes composed of cattle manure, peanut husk and spent coffee grounds, as well as to analyze the effect of earthworms on the microbial density and chemical properties of the vermicompost. Four treatments were employed, H1: cattle manure (100%), H2: cattle manure (75%) + peanut husk (25%), H3: cattle manure (75%) + spent coffee grounds (25%), H4: cattle manure (50%) + spent coffee ground (25%) + peanut husk (25%), with six replicates in a completely randomized design. The addition of spent coffee grounds to the manure increased the total biomass and indicated a rising trend in the production of cocoons, while the peanut husk apparently did not affect these variables. The CFU of bacteria and fungi were affected by the treatments at the beginning and end of the experiment and by the earthworms during the waste transformation. The evaluated organic waste mixtures differently affected the growth and reproduction of earthworms and chemical and biological properties of humus.

Effect of different solutions on color stability of acrylic resin-based dentures

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Prevalência, distribuição espacial e fatores de risco para cisticercose bovina no estado de São Paulo

This study aimed to determine the prevalence and geographical distribution as well as the factors and areas of risk associated with bovine cysticercosis in the State of Sao Paulo. 34.443 cattle, males and females with ages from 18 to 60 months were inspected. The animals were from 97 cities in the state of Sao Paulo and identified and slaughtered in the period October 2010 to August 2011, in a refrigerator located in Ipua - SP, under the supervision of SIF 1387. The state of Sao Paulo was divided into regional centers, and the data of the municipalities belonging to its core, were grouped according to the Department of Agriculture and Food Supply of Sao Paulo, totaling 13 cores studied. Based on these results, we can conclude that of the 97 cities analyzed, cattle were found positive for the disease in 86. The average prevalence of bovine cysticercosis in the state of Sao Paulo was 4.80 %, while the core inflation Franca and Barretos were the ones with the highest number of cases illness during the analysis period. Moreover, the largest number of cases in these core coincided with the lowest human development index covering education, with the largest acreage of coffee (core Franca) and also as the largest area of cane sugar grown (core Barretos) in these locations, which in turn may indicate that the presence of labor, temporary labor in rural areas, combined with socioeconomic/cultural factors might contribute to the spread and establishment of bovine cysticercosis in these areas.

Isotope analysis (δ 13c) of pulpy whole apple juice

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of Xylella fastidiosa genetic diversity by fAFPL markers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of the quantity of coloring agent in bleaching gels activated with LED/laser appliances on bleaching efficiency

The aim of this study was to assess the influence of the quantity of coloring agent on the bleaching efficiency of gels containing 35% H2O2. Sixty human third molars were sectioned mesiodistally, darkened in a coffee solution and sectioned in the occlusal-cervical direction, resulting in mesial (not bleached) and distal halves (bleached). They were distributed into three groups: Whiteness HP, Total Bleach, and Whiteform Perox Red Gel; and subdivided into four sub-groups: no coloring agent, manufacturer's standard, double the standard, and triple the standard. The gels were activated with light-ermitting diode/laser appliances. The images were analyzed with the Adobe Photoshop program (deltaEL*a*b*). The variation was submitted to the ANOVA test (two factors: type of gel and quantity of coloring agent) and Tukey test. Differences were observed for the quantity of coloring agent. The mean (+/-SD) was determined for each quantity of coloring used: no coloring agent -6.85 (+/-2.26)a, manufacturer's standard -794 (+/-2.55)ab, double the standard -8.65 (+/-2.47)b, triple the standard -9.05 (+/-2.72)b. In conclusion, the standard quantity of coloring agent did not provide significantly more intense bleaching than when it was completely absent. The use of double and triple the amount provided greater bleaching than that observed for the gel without coloring agent. No significant differences were observed between the tested gels.

Composite resin color stability: influence of light sources and immersion media

This study evaluated the influence of light sources and immersion media on the color stability of a nanofilled composite resin. Conventional halogen, high-power-density halogen and high-power-density light-emitting diode (LED) units were used. There were 4 immersion media: coffee, tea, Coke® and artificial saliva. A total of 180 specimens (10 mm x 2 mm) were prepared, immersed in artificial saliva for 24 h at 37±1ºC, and had their initial color measured with a spectrophotometer according to the CIELab system. Then, the specimens were immersed in the 4 media during 60 days. Data from the color change and luminosity were collected and subjected to statistical analysis by the Kruskall-Wallis test (p<0.05). For immersion time, the data were subjected to two-way ANOVA test and Fisher's test (p<0.05). High-power-density LED (ΔE=1.91) promoted similar color stability of the composite resin to that of the tested halogen curing units (Jet Lite 4000 plus--ΔE=2.05; XL 3000--ΔE=2.28). Coffee (ΔE=8.40; ΔL=-5.21) showed the highest influence on color stability of the studied composite resin. There was no significant difference in color stability regardless of the light sources, and coffee was the immersion medium that promoted the highest color changes on the tested composite resin.

Purification and characterization of a unique pectin lyase from aspergillus giganteus able to release unsaturated monogalacturonate during pectin degradation

A pectin lyase, named PLIII, was purified to homogeneity from the culture filtrate of Aspergillus giganteus grown in submerged culture containing orange peel waste as carbon source. PLIII was able to digest apple pectin and citrus pectins with different degrees of methyl esterification. Interestingly, the PLIII activity was stimulated in the presence of some divalent cations including Pb(2+) and was not significantly affected by Hg(2+). Like other pectin lyases, PLIII is stimulated by but is not dependent on Ca(2+). The main soluble product released during the degradation of pectic substances promoted by the PLIII is compatible with an unsaturated monogalacturonate. PLIII is a unique enzyme able to release unsaturated monogalacturonate as the only soluble product during the degradation of pectic substances; therefore, PLIII was classified as an exo-pectin lyase. To our knowledge, this is the first characterization of an exo-pectin lyase. The PLIII described in this work is potentially useful for ethanol production from pectin-rich biomass, besides other common applications for alkaline pectinases like preparation of textile fibers, coffee and tea fermentation, vegetable oil extraction, and the treatment of pulp in papermaking.

Ensino de física e energia: estudo de possibilidades didáticas na educação básica

This monograph has the inspiring theme of the Energy education, concept of extreme importance to physics, but that is rarely addressed in Brazilian schools. We bring a discussion of the problems faced in teaching this subject and present this analysis of how this issue is addressed in some textbooks that are part of the material available to students of basic education in our country. We also discuss a didactic proposal to the Physics Teaching using for this experiment. The proposal considers the student protagonist of the learning process being the builder of his own knowledge. For this proposal selected three experiments (solar plate, looping and looping coffee cups) analyzed from the point of view of energy that have the intention to leave this clearer content and close to the students. Here is the end of this work the application of the examination of this proposal in a public school in full-time education in the municipality of Rio Claro - SP

Botucatu: modernização e infraestrutura urbana no interior paulista (1928-1934)

Pós-graduação em História - FCLAS

Caracterização físico-mecânica de painéis de partículas de bambu com adição de casca de café

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Composite resin color stability: influence of light sources and immersion media

This study evaluated the influence of light sources and immersion media on the color stability of a nanofilled composite resin. Conventional halogen, high-power-density halogen and high-power-density light-emitting diode (LED) units were used. There were 4 immersion media: coffee, tea, Coke® and artificial saliva. A total of 180 specimens (10 mm x 2 mm) were prepared, immersed in artificial saliva for 24 h at 37±1ºC, and had their initial color measured with a spectrophotometer according to the CIELab system. Then, the specimens were immersed in the 4 media during 60 days. Data from the color change and luminosity were collected and subjected to statistical analysis by the Kruskall-Wallis test (p<0.05). For immersion time, the data were subjected to two-way ANOVA test and Fisher's test (p<0.05). High-power-density LED (ΔE=1.91) promoted similar color stability of the composite resin to that of the tested halogen curing units (Jet Lite 4000 plus--ΔE=2.05; XL 3000--ΔE=2.28). Coffee (ΔE=8.40; ΔL=-5.21) showed the highest influence on color stability of the studied composite resin. There was no significant difference in color stability regardless of the light sources, and coffee was the immersion medium that promoted the highest color changes on the tested composite resin.

Capacitação de produtores rurais para a melhoria da qualidade do leite cru produzido na região de Araçatuba - SP

This paper reports the results of an extension project carried out at Unesp/Veterinary Medicine course in Araçatuba city with milk farmers of the region. The aim of the project was to supply information to farmers concerning to good quality milk production and, at the same time, to follow up the evolution of milk quality parameters, according to the current Brazilian legislation. Every 45 days, approximately, lectures were presented to milk farmers in Araçatuba city region, approaching chemical and microbiological composition of milk, prevention and detection of mastitis, hygiene proceedings in milking and conservation of milk, cleaning and sanitization operations of facilities and equipments and prevention of adulteration. During the intervals between lectures, milk samples were collected from collective milk cooling tanks and analyzed for microbiological, hygienic and physicochemical tests. The main inadequacies in milk quality were high total bacteria and somatic cells counts, low solids contents and water addition. These problems did not proceed to betterment during the project time. So, it was concluded that the time for instruction of farmers was not enough for a progress in the quality of the milk produced in the region, pointing out the need in continuing this kind of work.