Influência da ingestão do triptofano dietético sobre a preferência na escolha do macho pela fêmea, auto-balanceamento da dieta e desempenho zootécnico em tilápia-do-Nilo e Pirapitinga

Pós-graduação em Aquicultura - FCAV

Investigation of the dielectric relaxation processes in PbZr0.65Ti0.35O3-BaFe12O19 multiferroic ceramic composites

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of fluazuron (2.5 mg/kg) and a combination of fluazuron (3.0 mg/kg) + abamectin (0.5 mg/kg) on the reproductive parameters of a field population of Rhipicephalus (Boophilus) microplus on experimentally infested cattle

The current study assessed the deleterious effects of two formulations of fluazuron (2.5 mg/kg fluazuron and a combination of 3.0 mg/kg fluazuron + 0.5 mg/kg abamectin) on the reproductive parameters of engorged Rhipicephalus (Boophilus) micro plus females that naturally detached from experimentally infested cattle in two experiments. Based on the obtained results, it can be concluded that fluazuron (2.5 mg/ kg) showed deleterious effects only on the hatchability percentage in the period of 2-7 post-treatment days of this ectoparasite's engorged females. On the other hand, the fluazuron (3.0 mg/kg) + abamectin (0.5 mg/kg) combination presented harmful effects over reproductive parameters of this tick species. Further studies should be performed with a known tick population (reference susceptible strain) to determine the effect of these formulations on the reproductive parameters and to elucidate if this field population is fluazuron resistant. (C) 2014 Elsevier Ltd. All rights reserved.

Análise do sistema de medição em uma linha produtiva de radar

In this work, we analyze a measurement system that will be implanted in a wheels production line, in order to use those wheels for buses and trucks. The measurement device has to be approved according to the MSA study, due to the fact that the mentioned industry is an automobilistic supplier, so that it has to be conform with the ISO/TS 16949 standards. We showed the MSA studies, as well as some concepts for the work understanding. The airlock wheels systematic production is also broached, that is to say, wheels that use airlock tyres, with a better attention given to the rim production, where the device must be implanted. We analyze and assess the data’s acceptance according to the guidelines showed in this study, along with this, improvement proposals are elaborated and their analysis is made, in order to check the obtained results. Finally, we survey the analyzed measurement system, and new studies are suggested, with the intention of improving it

Estudos estruturais por difração de raios X de fosfolipases A2 em presença de íons com importância funcional

Snakes from Bothrops genus are responsible for more than 90% of the ophidian accidents in Brazil. One of the main complications from this kind of accident is muscular necrosis, which is related to the action of phospholipases A2 and metalloproteases, two groups of enzymes found in the venom of these animals. Although this complication cannot be solved by serum therapy administration, a great number of studies have been performed with the attempt to know the pharmacological sites of these toxins aiming, in the future, the development of complementary treatments to serum therapy. This work proposes structural studies of bothropic phospholipases A2 (PLA2s) in the presence of ions relevant to their activity, using the X-ray crystallography technique. Recently, it was demonstrated ions, as manganese, calcium and others, interfere in the biological activity of the PLA2s. Particularly, Lys49-PLA2s in the presence of manganese ions have miotoxicity reduced. Asp49-PLA2s show catalytic activity dependent of calcium, although structural studies with a miotoxic Asp49-PLA2, BthTX-II, suggest a possible catalytic mechanism independent of calcium. Therefore, co-crystallization of BthTX-II in the presence of calcium ions and of PrTX-I in the presence of manganese ions were performed. Comparative structural studies among obtained results and others already published in the literature were performed aiming a better understanding of the structure-function relationship of these toxins. The BthTX-II with the presence of calcium do not show this ion in the loop of coordination of calcium, presence necessary to develop the catalyses. After comparison of this model with the native one, only one distortion was found, but no apparent relationship with the residues responsible for its activity. In the PrTX-I structure, regions candidates of manganese ions were also found... (Complete abstract click electronic access below)

Análise granulométrica do compósito cimentício produzido com adição de resíduos de madeira e escória

Since the early twenty-first century, the construction sector has been the second largest on the rise in the Brazilian industrial sector, with a growth of 1.4% in 2012, and is likely to remain at this level for a long time. However, unlike decades ago, the industry has been seeking in its manufacturing process, sustainable materials, encompassing in their works the concept of sustainability. Thus, the timber sector seeks to satisfy a market increasingly demanding, innovating techniques and utilization being less aggressive to the environment. The purpose of this study was to produce and evaluate the mechanical strength of the composite cement with the addition of wood residues and slag low oven. Therefore, it was made 42 specimen cement-slag-wood, carried out in two steps. Since at the first, it was varied only the slag particle size, and at the second, through the best result of the previous step, it was varied the wood particles granulometry. The mechanical performance of the composite was evaluated by the results obtained in the compression test and the physical test for determining the density of the material. In the first step of the process can be concluded that the best result was achieved with the use of slag particles retained on the 60 mesh sieve. In the second phase of the study concluded that the best results were achieved with wood particles with the large particles, i.e. particles retained on the 10 mesh sieve. Both in the first and in the second step it can be seen that there has been the influence of the particle size of the waste materials. With the obtained results, could be evaluated that the use of waste for the production of cement-slag-wood composite showed lower performance when compared to the results obtained in studies without the use of waste. However, some applications are feasible to be performed with the use of composite wood-cement-slag

Incorporação do lodo da estação de tratamento de água (ETA II) do município de Rio Claro-SP, na argila, para produção de cerâmica vermelha

The slugde from decanters in Water Treatment Plants (WTP) has different composition varying, according to the region, coagulant type and dosages, the plant layout. In this work, the physical characterization of the sludge generated from decenties (ETAII the municipality of Rio Claro, Brazil), the manufacture of bodies of evidence-sludge mixture of clay (with humidity of 8% and concentrations of sludge, 5, 15 and 30%) the testing technology after burning the mixture to a temperature of 950 ° C were investigated. The main aim assess the possibility of its use as raw material in the ceramic red production. For comparison of the obtained results it was used values of the testing technology of bodies of evidence only with clay, prepared under the same conditions. In general, the addition of sludge from ETA made worse the properties of the ceramic body, however, the values obtained from the tests on the concentration of 5% of sludge, still remain within the acceptable limits for the production of red pottery pieces.

Produtores de Água na Microbacia do Manancial Córrego do Veado – Presidente Venceslau, São Paulo: potencialidades em questão

The programs Water Producer and Water Mine are the starting point for the research, whose the main objective is to develop a study on the necessity and possibility to forming water producers in the Veado Creek Watershed Deer, located in Presidente Venceslau - Sao Paulo, in order to improve the quality and quantity of water from the spring. To this end, the implementation of programs in the spring, especially the Water Mine, developed by the State of Sao Paulo, could help change the situation in which degradation is the area of the watershed. The main methodological procedures were performed: survey and literature review, interviews with employees SEAAMA, CATI, interview with the president of the Association of Owners of Rural Watershed of Deer Creek; interview with landowners of the Fountain Creek Watershed Deer; work in the search field at the landfill to the DAE and the Association of Collectors of Recycled. We are dealing with issues such as the importance of the Code of forests with regard to the protection of water resources, decentralized management and participatory of water resources, Payment by Environmental Services, production of water, characterization and diagnosis of the environmental Microbacia of Wealth Córrego do Veado, sanitation of the municipality of Presidente Venceslau. Analyzed the current situation of the watershed of the spring, highlighting the main actions that have been performed by the municipality through the watershed program of the State of São Paulo City Hall and through the resources FEHIDRO. The obtained results allowed to demonstrate the need and the possibility of setting up the Project Mine Of Water in the watershed of the fountain and the interest of owners interviewed by adherence to the Project and the protection of the source

Avaliação de juntas soldadas em tubos de aço carbono submetidos a altas temperatura e pressões

The welding process in industrial piping is still the most effective way to ensure the durability and quality of the wide range of industrial process, although because of the high demand for energy and quality of the produced products, the piping has been constantly tested for high pressure applications and still high temperature. The welding method analyzed is the TIG (Tungsten Inert Gas) welding or GTAW (Gas-Shielded Tungsten Arc Welding), which ones have as principal feature the utilization of a not consumable tungsten electrode in the torch extremity , in this process is necessary a protective atmosphere of inert gas. The welding TIG advantage is the obtaining of a welded seam clean and with quality for not has slag after the welding. This work has as objective show the variability in the carbon steel piping welding parameters and by the tests in four proof bodies will be shown the influence of the variation of the welding methods in a welded seam. The tests will vary since the piece to be welded preparation, till penetrating liquid tests, welding macrography, welding x-ray and traction tests. Even been a clean and with quality welding is necessary a final inspection in the seam welded looking for defects almost inevitable resulted of the welded process, the obtained results have the objective of indicate and minimize the defects to ensure quality and durability of the welded seam

Tratamento de água pluvial para fins não potáveis com utilização de amido de milho como coagulante em filtração cíclica em escala de laboratório

The aim of the present work is to investigate a simplified rainwater treatment strategy for nonpotable use. For this, there were simulated in laboratory scale the treatment conditions of a system that employs Corn Starch as a coagulant in cyclic filtration (from 1 to 5 filtration cycles). A commercial Corn Starch in different dosages was used (0,1; 0,2; 0,4; 0,6; 0,8; 1,0; 1,5; 2,0; 2,5; 3,0; 3,5; 4,0; 4,5; 5,0; 5,5; 6,0; 6,5; 7,0; 7,5; 8,0; 8,5 e 9,0 mg/L). The NBR 15527/07 recommended parameters were monitored on the inflow and outflow and compared to different first flushes (0.5; 1.0 and 1.5mm). The obtained results indicate that the 6.0mg/L dosage presented the best results (removal efficiency of 86% of turbidity; 88% of apparent color and absent of total and faecal coliform residuals). However, it was not possible to prove the filtration cycles benefit, in laboratory scale, because for some Corn Starch dosages the water did not present better quality when increasing the number of cycles.

Comportamento fractal de superfícies de fadiga em ligas aeronaúticas

Fracture surfaces express sequences of events of energy release with crack propagation in metal alloys, the evolution of topographic features can indicate the lines of load action, failures during the use or processing. The quantitative fractography is an important tool in the study of fracture surfaces, because it allows their interpretation and characterization. In order to evaluate the effectiveness of the characterization of fracture surfaces grounded on concepts such as selfsimilarity and self-affinity, it used the 15-5PH steel that was characterized by metallographic and tensile tests. The metallography allows the microstructural characterization of this steel and proved the presence of the martensite phase in the slats form and a fine-grained, both in the radial and in the axial direction of the dowel. The tensile test (ASTM E8) of this material allowed the determination of the mechanical properties, so based on the obtained results it was possible to affirm that the 15-5PH steel has high mechanical properties and a good stretch. Besides, the specimens also underwent testing of crack propagation, standardized by ASTM E647-00, thus it was obtained the fracture surfaces for characterization under monofractal and multifractal approaches. In front of all the exposed it was possible to conclude that in all measurements the correlation between the crack tip position and the fractal dimension was established in accordance with changes in the thickness and in the fracture micromechanisms presents. Furthermore, the multifractal approach was more sensitive to these variations allowing a more detailed characterization of the morphology

Modelagem e simulação do mecanismo biela manivela e análise estrutural de biela automotiva

Nowadays, the automotive industry is working to optimize the design of engines, in order to reduce the fuel consumption with acceptable efficiency ratio. This undergraduate thesis is aimed at perform a kinematic/dynamic analysis of a slider-crank mechanism that is part of a four stroke internal combustion engine, the same engine that was used in the analysis described by Montazersadhd and Fatemi (2007). Two algorithms were developed based on Kane’s method to calculate velocities and accelerations of the mechanism bodies, and provide the acting forces at connecting rod joints. A SimMechanics model was developed to simulate the engine, and monitoring the same parameters that were calculated with the algorithms. The results obtained with both approaches were satisfactory and showed good agreement with the values provided by Montazersadhd and Fatemi (2007). The obtained results showed that the axial component of the rod joint efforts was caused by the pressure exerted on the piston head,whereas the radial component was related with the action of inertia loads. Besides, this thesis presents a connecting rod assembly mesh that is going to be used for static and fatigue finite element analysis in the future

Automatização de testes funcionais utilizando a ferramenta Sikuli

This work seeks to demonstrate the advantages in functional software test automation using Sikuli tool, which uses image recognition to find the graphical elements of a system, in addition to using a custom library with methods made to automate the summarization of obtained results through the tests and their evidence

Efeitos da atividade física sobre equilíbrio, risco de quedas e função cognitiva de idosos com demência de Alzheimer: Salma Stéphany Soleman Hernandez. -

The Alzheimer’s dementia represents a clinical condition inherent to many chronic and neurodegenerative diseases that are usually related to a decline in the cognitive and physical functions. The objective of this experimental design research was to analyze the effects of a regular and systemized physical activity program over the cognitive functions, balance and risk of falls of elderly with Alzheimer’s Dementia (DA). The sample was made of 16 elderly with DA, distributed in two groups: a) intervention group – GI (9 subjects that had participated in a program of physical activity, that consisted of 3 weekly sessions of 60 minutes each, in alternated days and with a duration of 6 months); b) control group – GC (7 subjects that did not participate in the program of physical activity). Both groups maintained the doctoral and pharmacological assistance routine. The subjects passed through two different evaluations (pre and post-intervention) the questionnaire (Mini-exam of Mental State for cognitive functions) and motor tests (Berg Functional Balance Scale – EEFB, Timed Up-and-Go (TUG) time (TUGs) and steps (TUGp) and the test of agility and dynamic balance (AGILEQ) of the American Alliance for Health, Physical Education Recreation and Dance for elderly). The obtained results were, respectively in the pre and post-intervention moments: a) AGILEQ (GI = 39,1 ± 10,2 and 38,4 ± 8,9 and GC = 45,6 ± 16,7 and 59,9 ± 22,0 seconds) with the statistically interaction significant (ANOVA two-way; F1,14 = 32,07; p=0,01) between groups and moments; b) TUGs (GI = 9,8 ± 2,5 and 9,5 ± 3,3 and GC = 10,6 ± 4,5 and 12,7 ± 7,3 seconds) the test UMann Whitney did not appoint any significant differences between the groups in the post-intervention moment, however the analyzes of Wilcoxon evidenced a ...(Complete abstract click electronic access below)