Identificação de cavidades naturais por meio de eletrorresistividade na região de São Pedro (SP)

The scope of this work is the study of natural cavities in gullies through geophysics. The studied area is located in the city of São Pedro (SP) more precisely in the gully of Tucunzinho. The historic of the area shows that, since the 60s there were problems with the high rate of erosion in the gully. In addition to increased erosion, there is the appearance of cavities inside responsible for rebates, aggravating the situation. Geophysical methods have been successfully applied in environmental studies since they are noninvasive, are fast and relatively inexpensive. In order to better understand the context of formation of the pipes in relation to local geology, three arrangements were compared for the method of Electrical Resistivity, Schlumberger, Wenner and Dipole-dipole. Then, it was possible to determine which one is the best for this type of study. According to the data obtained in the field, the Schlumberger array presents more consistent results in relation to the erosive context analyzed

Avaliação das características geomorfológicas na sensibilidade ambiental a derrames de óleo: estudo de caso no baixo curso do rio Piracicaba

The environmental sensitivity charts to oil constitute an important tools for contingency planning and assessment of damage caused by oil spills. The main objective of this article is to evaluate the sensitivity of river dynamics to oil spills. Through the identification and mapping of fluvial geomorphological features will be assessed the importance of these resources in terms of sensitivity to oil spills. Through satellite images, was obtained the geomorphological mapping and geomorphological parameters were analysed, in order to characterize the environmental sensitivity to oil spills and derivatives. Therefore, the implementation of an environmental sensitivity mapping from geomorphological parameters contributes to the mapping of the environmental sensitivity to oil, which will assist in the containment and cleanup procedures in case of accidents in fluvial and terrestrial environments, that are slightly studied in Brazil

Utilização dos parâmetros físico-químicos e redes neurais artificiais na identificação dos méis de abelhas (Apis mellifera L.) produzidos no verão e inverno na microrregião de Campos de Jordão, São Paulo

The objective of this work was to typify, through physicochemical parameters, honey from Campos do Jordão’s microrregion, and verify how samples are grouped in accordance with the climatic production seasonality (summer and winter). It were assessed 30 samples of honey from beekeepers located in the cities of Monteiro Lobato, Campos do Jordão, Santo Antonio do Pinhal e São Bento do Sapucaí-SP, regarding both periods of honey production (November to February; July to September, during 2007 and 2008; n = 30). Samples were submitted to physicochemical analysis of total acidity, pH, humidity, water activity, density, aminoacids, ashes, color and electrical conductivity, identifying physicochemical standards of honey samples from both periods of production. Next, we carried out a cluster analysis of data using k-means algorithm, which grouped the samples into two classes (summer and winter). Thus, there was a supervised training of an Artificial Neural Network (ANN) using backpropagation algorithm. According to the analysis, the knowledge gained through the ANN classified the samples with 80% accuracy. It was observed that the ANNs have proved an effective tool to group samples of honey of the region of Campos do Jordao according to their physicochemical characteristics, depending on the different production periods.

Identificação de Physciaceae s.l. foliosas brasileiras

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Imagens aéreas multiespectrais na identificação de zonas de manejo em áreas de algodão para aplicação localizada de insumos

Crop yield is influenced by several factors with variability in time and space that are associated with the variations in the plant vigor. This variability allows the identification of management zones and site-specific applications to manage different regions of the field. The purpose of this study was the use of multispectral image for management zones identification and implications of site-specific application in commercial cotton areas. Multispectral airborne images from three years were used to classify a field into three vegetation classes via the Normalized Difference Vegetation Index (NDVI). The NDVI classes were used to verify the potential differences between plant physical measurements and identify management zones. The cotton plant measurements sampled in 8 repetitions of 10 plants at each NDVI class were Stand Count, Plant Height, Total Nodes and Total Bolls. Statistical analysis was performed with treatments arranged in split plot design with Tukey’s Test at 5% of probability. The images were classified into five NDVI classes to evaluate the relationship between cotton plant measurement results and sampling location across the field. The results have demonstrated the possibility of using multispectral image for management zones identification in cotton areas. The image classification into three NDVI classes showed three different zones in the field with similar characteristics for the studied years. Statistical differences were shown for plant height, total nodes and total bolls between low and high NDVI classes for all years. High NDVI classes contained plants with greater height, total nodes and total bolls compared to low NDVI classes. There was no difference in Stand Count between low and high NDVI classes for the three studied years. The final plant stand was the same between all NDVI classes for 2001 and 2003 as it was expected due to the conventional seeding application with the same rate of seeds for the entire field.

Deposição e danos mecânicos em sementes de sorgo utilizando um mecanismo dosador de fluxo contínuo em ensaio de bancada

This study aimed to evaluate the behavior of the deposition and mechanical damage in seeds using a continuous flow metering system under different slope and speed. Part of the study was conducted at Agricultural Research Foundation Agricultural - (FAPA), where seeds that are deposited by a metering system were collected, and the quality analysis verifying the percentage of mechanical damage were conducted at the Faculty of Agricultural Sciences, UNESP, city of Botucatu– SP. The mechanism deposition was subjected to three different speed conditions (4,7, and 10 km.h-1) and three differents working slopes, ( 3%, 8%, and 16%). The results were submitted to Tukey test (p ≤ 0.05), and an analysis of variance with F test at 5% significance level was performed. The results showed an interaction between the factor slope and speed of work, increasing the metering mechanism speed, results in a reduction of the seed deposition at a 3% slope but a working speed of 10 km h-1did not reduce the rate of seed deposition until the slope reaches 16%. Both the slope factor and the working speed caused at least 3.9 and 4.2% more damage to the seeds, respectively.

SIG aplicado na identificação e localização potencial de áreas de preservação permanente numa microbacia

O uso inadequado do solo é um fator agravante da degradação ambiental e desequilíbrio ecológico. Este trabalho visou avaliar os conflitos de uso da terra em áreas de preservação permanentes (APP) na microbacia do São Pedro - Botucatu (SP) através de Sistema de Informações Geográficas e imagem de satélite de 2006. A área de estudo localiza-se entre as coordenadas geográficas 48º 21’ a 48º 23’ de longitude WGr. e 22º 52’S e 22º 56’ de latitude S com uma área de 1458,4ha. Os resultados permitiram verificar que as técnicas de geoprocessamento foram de importância fundamental na identificação das áreas de uso de terra, de APPs e de conflitos entre uso e APPs onde uma pequena parte das áreas de APPs está conflitando. Em termos de sustentabilidade ambiental, pode ser deduzido que a microbacia é desfavorável, uma vez apresenta com quase 44% da área usada inadequadamente por pastagens.

Métodos de classificação de imagens na identificação de áreas cultivadas com citros

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparação de métodos de classificação de imagens na identificação de áreas cultivadas com citros

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito da modificação atmosférica em goiabas var. Paluma na redução de danos mecânicos em pós-colheita

In the postharvest management, the fruits can be exposed to injuries that depreciated the quality and the shelf life. Thus, it was evaluated the modified atmosphere effects on guavas var. Paluma subjected to different mechanical damages. Once harvested, the fruits were selected, sanitized and submitted to the treatments T1 (control) - without injuries or packaging in bags of low density polyethylene (LDPE); T2 - without injuries + LDPE bags; T3 - damage by fall of 1 m + LDPE bags; T4 - damage by compression of 9 N + LDPE bags; T5 - damage by fall of 1 m + damage by compression of 9 N + LDPE bags and T6 - damage by fall of 1 m + damage by compression of 9 N without LDPE bags. The treatments were kept in cold storage at 10 ± 1 o C and 94 ± 2% de R.H. The analysis of CO2/ethylene production, enzymatic activity, total and soluble pectins, pulp firmness, titratable acidity (TA), soluble solids (SS), reducing sugars and ascorbic acid were performed every 10 days of refrigeration, and an additional day outside cold storage (22 ± 1o C and 75 ± 3% R.H.) for 30 days. Guavas packed in LDPE bags, not subject to mechanical damage, presented the best quality standards. The fruits suffered only one kind of damage, when packaged, presented satisfactory pattern compared to the fruits without package and not exposed to any mechanical damages. Applying the two kinds of damages, the LDPE packaging was not adequate to decrease the metabolic rate of these fruits, making them unfit for marketing.

Application of Volterra series in nonlinear mechanical system identification and in structural health monitoring problems

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Identificação de cavidades em voçoroca por meio da aplicação do método geofísico da eletrorresistividade

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Identificação de regiões polimórficas para alta produtividade de mel e sequênciamento genômico em abelhas Apis mellifera africanizadas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação de danos no material genético em anestesiologistas

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Identificação de genes de predisposição à síndrome dos carcinomas de mama e tireoide por sequenciamento total do exoma

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)