Drought tolerance of two field-grown clones of Coffea canephora

We compared tolerance to soil drought of two field-grown clones of Coffea canephora (clone 46, drought-sensitive; and clone 120, drought-tolerant). Under irrigation, there were no marked differences between the clones in water relation parameters, gas exchange and total leaf area. Under rainfed conditions, clone 46 showed osmotic adjustment and increased tissue rigidity. These adjustments, however, were incapable of preventing substantial decreases in xylem pressure potential. By contrast, clone 120 did not exhibit osmotic adjustment, but was able to increase tissue elasticity and to maintain xylem pressure potentials to a greater extent than clone 46 (despite having twice the total leaf area of this clone). Stomatal conductance was lowered by drought in clone 120 but not in clone 46. Carbon assimilation per unit leaf area in both clones remained unaffected under stress. Long-term water use efficiency (WUE), as estimated through carbon isotope discrimination, was consistently greater in clone 120 than in clone 46. Because of these traits, clone 120 was better able to postpone dehydration and to maintain whole-tree photosynthesis. It is proposed that these features should decisively contribute to buffer its productivity in drought-prone areas. © 2002 Elsevier Science Ireland Ltd. All rights reserved.

Produção de variedades de alface sob diferentes potenciais de água no solo em ambiente protegido

The knowledge of meteorological elements in protected environment is very important for commercial plants, because of possibility to produce for all the year according to the study conduced in Botucatu - SP, in order to evaluate the effects of different irrigation treatments on three lettuce cultivars. (Lisa, Crespa and American). The study was developed in a polyethilene tunnel with orientation northeast/southwest (NE/SW) and the fertigation through drip irrigation. Leaf number, head diameter, fresh weigh, dry weigh, meteorological elements and evaporation from minievaporimeters were determined. Four treatments of minimum soil water potential were applied: 20, 28, 35 and 45 kPa and the results showed the treatment -35 kPa showed the highest lettuce production and maximurn water efficiency use. The highest productions occurred in May/June, July/September and September/November, while the worst one was in February/April. There was not significant difference of dry mass production among the treatments, independently of the year period with exception of the Crespa cultivar which was superior in September/November. The south face showed the highest evaporation.

Efeitos de níveis de cobertura do solo sobre a produtividade e crescimento do feijoeiro irrigado, em sistema de plantio direto

The objective of this research was to study the effects of five different treatments of grass (Brachiaria decumbens) straw mulch on common beans (Phaseolus vulgaris L.): 0% (0 t.ha-1), 25% (2,25 t.ha-1), 50% (4,5 t.ha-1), 75% (6,75 t. ha-1) and 100% (9,0 t/ha) designed by randomized blocks, with four replicates. The irrigation was applied when minimum soil water potential were reached about - 30kPa. The water management based on tensiometers and soil water characteristic curve. A microsprinkler irrigation system was used. The experiment was set up at the Experimental Station of Embrapa Rice and Bean (Empresa Brasileira de Pesquisa Agropecuária Arroz e Feijão) at Santo Antonio de Goiás, Brazil, in a Dark - Red Latosol soil. The results showed: the bean yield and his components were not affected by treatments, except grain number/pod,. The mulch increased the water use efficiency and, consequently, decreased the number of irrigations when the mulch reached more than 50% straw mulch. The treatment with 100% of mulching presented the largest leaf area index and dry matter accumulation was not affected by mulching.

Comparação entre trȩs métodos para estimar lâminas de irrigação

An experiment with four treatments was carried out on the experimental area of ADEI to compare three methods of water use requirement: ETc (T1) - irrigation based on crop evapotranspiration (ETc); Tensiometers (T2 and T3) - irrigations were made through reading of tensiometers installed at 40 cm deep and, Control (T4) - only one irrigation to promote the seedlings emergence. Both Class A pan and soil water depletion methods presented good results when the crop was developed without restraint of water. The Katerji method can be utilized in conditions of water restriction. Irrigation frequency was more important than amount of applied water for higher yield.

Avaliação de desempenho do microaspersor amanco em bancada de testes

The need for a rational use of water and supply of food for a growing world population have led to the development of research in the area of irrigation systems. Thus, some irrigation systems which join efficiency with low cost of material have been developed. Although some technical characteristics are provided by the manufacturers, tests are required to verify functioning of the system and uniformity of water distribution. Continuous research on uniformity, characteristics of the materials and design of water distribution systems is essential for system improvement. Therefore, the objective of this work was to evaluate the CV (manufacturer's coefficient of variation) of Amanco microsprinkler (1.0 mm light green nipple) using bench testing in the laboratory of Irrigation at UNESP - FCA campus of Botucatu-SP. Twenty-five microsprinklers in a sequential design were used in the tests. Three flow systems were tested as follows: a Coil system based on serial connected pipes; a Lateral system, the most common system in which secondary lines are fed by a main line; and a Mesh system used in the urban water supply. The results showed that 4.17% CVf met the production standards and the Lateral and Mesh systems were similar regarding outflow using bench testing. The Mesh system presented the highest mean value of outflow and the lowest range of variation.

Efeito de métodos de determinação de parâmetros para o controle da irrigação na eficência do uso da água do feijoeiro, sob três diferentes lâminas de água no solo

The objective of this research was to study three methods of parameter determination for irrigation control under different tensions in common bean (Phaseolus vulgaris L.). The treatments were a combination of three methods of parameter determination for irrigation control (tensiometer, water retention curve, USWB Class A pan) with three soil water tensions (1:-30 kPa; 2:-60, kPa both for the whole plant cycle; 3:-60 kPa for the vegetative phase and -30 kPa for the reproductive phase). The experimental design was randomized blocks, factorial 32 with three replicates. Although no significant effect on water use efficiency was found, a tendency for increasing water use efficiency in treatments with tensions of -60 kPa at the vegetative phase and -30 kPa at the reproductive phase was observed in all methods of parameter determination for irrigation control. Water was saved as less irrigation was applied during the vegetative phase and more irrigation at the reproductive phase. No precipitation was observed from June to September 1995, leading to a high yield and therefore to a higher water use efficiency.

Estimativa da exigência hídrica do amendoim usando um modelo agrometeorológico

In the experimental area of the Department of Environmental Sciences (21.85° S; 48.43° W; 786 m), in the School of Agronomical Sciences, UNESP, Botucatu, SP, an experiment was carried out using peanut (Arachis hypogaea L), cv. IAC-TATU-ST, to quantify the crop daily water requirements. During the peanut crop cycle, the environmental variables, such as rainfall, air temperature, air relative humidity, soil matric potential, soil heat flux and radiation balance, have been registered continually. These measurements were used to calculate the daily crop evapotranspiration, by the Bowen ratio method. The water replacement required by the peanut crop was done the dripping irrigation system, oriented by a dynamic agrometeorological model that computes the entrance and exit of water in the soil. During the peanut crop cycle, 9.0 mm of water was used from sowing to emergence; 67.0 mm of water, in the growth stage; 166.0 mm, in the flowering stage; 124.0 mm in the final stage and 46.0 mm from physiological maturity to harvest. Oot of 412.0 mm of the total consumption, 246.0 mm of water was supplied by irrigation and 166.0 mm by the rain. The grain yield was 3.15 t ha-1 for 15% of humidity, and the water use efficiency was 0.764 kg m-3.

Efeito do uso de água cinza sobre a vazão de um microaspersor dinâmico

The work was realized at the Laboratório de Ensaio de Equipamentos de Irrigação do Departamento de Engenharia Rural da Universidade Estadual Paulista FCA- UNESP de Botucatu - SP, it aims evaluated in bench, the flow of a microsprinkler flow with dynamic nominal 43L h-1, before and after the use of gray water. In the first phase were 25 new emitters were separated and performed tests with clean water, at pressures from 50 to 300 kPa. In a second phase the emitters have been submitted 1000h operating with gray water. At the end of this time, the emitters were submitted again into conditions of initial essay, to evaluate the new costume water effect on medium flow from microsprinkler. At the end we can see that the average flow of the emitters, after use, has declined compared to the emitters discharge before use in 6,6%, the coefficient of variation after use was 5,1%, increased in proportion the coefficient of initial production was 4,3%, the R 2 fell from 0.9946 to 0.9898 and the microsprinkler continued with a high rating, according to the ABNT and ASAE.

Resposta produtiva do feijoeiro comum a diferentes manejos de irrigação

The objective of this work was to analyze the most appropriate management to achieve higher productivity for carioca beans (phaseolus vulgaris) and pearll cultivar. The research was developed in the Demonstrative and Experimental Area of Irrigation (ADEI) of FCAV/UNESP, Campus of Jaboticabal, SP. Four treatments were used: T1- irrigation with base in ETo estimated by the method of Class A pan; T2- irrigations based on the readings of tensiometers installed at 0,20 m and 0,40 m of depth; T3- irrigations carried out with base in ETo estimated by the method of Penman-Monteith and T4- witness. The results were submitted to analysis of variance. To compare the averages the test Turkey was used at 5% of probability. The treatment T3 had smaller applied water depth than the treatments T1 and T2, and also smaller productivity. The conclusion is that the treatments irrigated with larger frequency showed higher production of grains.

Simulação da oferta e demanda de recursos hídricos nas bacias dos rios piracicaba, capivarí e jundiaí: Uma análise em dinâmica de sistemas

A dynamic systems water resources simulation model was developed as a tool to help to analyze water resources management alternatives for the Piracicaba, Capivari and Jundiaí River Water Basins (BH-PCJ). Different politics policy were simulated for 40-year. The model estimates water supply and demand, as well as contamination load from several consumers. Six runs were performed using average precipitation value, changing water supply and demand, and different volumes diverted from BH-PCJ to BH-Alto Tietê For the Business as Usual, the Sustainability Index went from 0.41 in 2010 to 0.22 by 2050; the Water Use Index changed from 80.7% in 2010, to 125.5% by 2050; and the Falkenmark Index changed from 1,302 m 3 person -1 year -1 in 2010 to 774 m 3 P -1 year -1 by 2050. It was noticed that sanitation is one of the biggest concerns in the near future at PCJ River Basin.

Produção e Qualidade Física dos Frutos do Abacaxi sob Diferentes Lâminas e Frequências de Irrigação

The objective of this study was to evaluate the performance of pineapple cultivar Smooth Cayenne as the physical production and the quality of the fruit when subjected to different frequencies of water dpeth and soil water in Triângulo Mineiro - Uberaba-MG. The experimental area soil is Oxisol, clay loam sandy and soft undulating local relief. A randomized block design in a factorial 4 x 2 with four levels of soil water depth (50%, 75%, 100% and 125%) of crop evapotranspiration (ETc) and two irrigation frequencies (1 day and 3 days = F1 = F2) and four replications was utilized. The crop productivity, number of seedlings, mean weight, diameter, and hardness of the fruit, plus water use efficiency were evaluated. Productivity was not significantly affected by the water depth and by the frequency of water applied; however the fruit shell resistance, the efficiency of water use, and ratoon seedlings were significantly influenced by irrigation, the water depth of 50% of the crop evapotranspiration (ETC) provided greater efficiency of water use for the production of pineapple fruit.

Reliability and failure modes of internal conical dental implant connections

Objective: Biological and mechanical implant-abutment connection complications and failures are still present in clinical practice, frequently compromising oral function. The purpose of this study was to evaluate the reliability and failure modes of anterior single-unit restorations in internal conical interface (ICI) implants using step-stress accelerated life testing (SSALT). Materials and methods: Forty-two ICI implants were distributed in two groups (n = 21 each): group AT-OsseoSpeed™ TX (Astra Tech, Waltham, MA, USA); group SV-Duocon System Line, Morse Taper (Signo Vinces Ltda., Campo Largo, PR, Brazil). The corresponding abutments were screwed to the implants and standardized maxillary central incisor metal crowns were cemented and subjected to SSALT in water. Use-level probability Weibull curves and reliability for a mission of 50,000 cycles at 200 N were calculated. Differences between groups were assessed by Kruskal-Wallis along with Bonferroni's post-hoc tests. Polarized-light and scanning electron microscopes were used for failure analyses. Results: The Beta (β) value derived from use level probability Weibull calculation was 1.62 (1.01-2.58) for group AT and 2.56 (1.76-3.74) for group SV, indicating that fatigue was an accelerating factor for failure of both groups. The reliability for group AT was 0.95 and for group SV was 0.88. Kruskal-Wallis along with Bonferroni's post-hoc tests showed no significant difference between the groups tested (P > 0.27). In all specimens of both groups, the chief failure mode was abutment fracture at the conical joint region and screw fracture at neck's region. Conclusions: Reliability was not different between investigated ICI connections supporting maxillary incisor crowns. Failure modes were similar. © 2012 John Wiley & Sons A/S.

Trocas gasosas, índices fisiológicos e acúmulo iônico em plantas jovens de Annona emarginata (Schltdl.) H. Rainer em solução nutritiva

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Produção de videira 'Superior Seedless', cultivadas em diferentes tensões de água no solo

The aim of this study was to evaluate the total number of clusters per plant and the sugar concentration of Superior Seedless grapevine branches under different soil water tensions conditions. The statistical design was a randomized block with 4 treatments (a) control, b) 70 kPa tension, c) 50 kPa tension, d) 30 kPa tension, and 6 replications, each plot consisting of two plants. Soil moisture curves were plotted in laboratory and field conditions, potential bud fertility (carried out with the help of a 30x magnifier glass and collecting 17 branches in the primary arm of the plant with 15 buds each), actual fertility (given by the fertile buds to sprouted buds per plant ratio) and total sugars. Laboratory conditions helped stress to reach a -70 kPa level in just 21 days during the procedure to determine the retention curve in the laboratory. The different stress levels applied to the soil did not cause significant differences in the total number of clusters per plant. However, a -30 kPa stress showed a 68% reduction in water depth when compared to control and different soil water stress affected the carbohydrate percentage in branches of the Superior Seedless vine.

Seasonal variation in leaf traits between congeneric savanna and forest trees in Central Brazil: Implications for forest expansion into savanna

The ecology of forest and savanna trees species will largely determine the structure and dynamics of the forest-savanna boundaries, but little is known about the constraints to leaf trait variation imposed by selective forces and evolutionary history during the process of savanna invasion by forest species. We compared seasonal patterns in leaf traits related to leaf structure, carbon assimilation, water, and nutrient relations in 10 congeneric species pairs, each containing one savanna species and one forest species. All individuals were growing in dystrophic oxisols in a fire-protected savanna of Central Brazil. We tested the hypothesis that forest species would be more constrained by seasonal drought and nutrient-poor soils than their savanna congeners. We also hypothesized that habitat, rather than phylogeny, would explain more of the interspecific variance in leaf traits of the studied species. We found that throughout the year forest trees had higher specific leaf area (SLA) but lower integrated water use efficiency than savanna trees. Forest and savanna species maintained similar values of predawn and midday leaf water potential along the year. Lower values were measured in the dry season. However, this was achieved by a stronger regulation of stomatal conductance and of CO2 assimilation on an area basis (A area) in forest trees, particularly toward the end of the dry season. Relative to savanna trees, forest trees maintained similar (P, K, Ca, and Mg) or slightly higher (N) leaf nutrient concentrations. For the majority of traits, more variance was explained by phylogeny, than by habitat of origin, with the exception of SLA, leaf N concentration, and A area, which were apparently subjected to different selective pressures in the savanna and forest environments. In conclusion, water shortage during extended droughts would be more limiting for forest trees than nutrient-poor soils. © 2013 Springer-Verlag Berlin Heidelberg.