76 resultados para vähäliikenteinen tie
Resumo:
This paper presents an improved analysis of a novel Programmable Power-factor-corrected-Based Hybrid Multipulse Power Rectifier (PFC-HMPR) for utility interface of power electronic converters. The proposed hybrid multipulse rectifier is composed of an ordinary three-phase six-pulse diode-bridge rectifier (Graetz bridge) with a parallel connection of single-phase switched converters in each three-phase rectifier leg. In this paper, the authors present a complete discussion about the controlled rectifiers' power contribution and also a complete analysis concerning the total harmonic distortion of current that can be achieved when the proposed converter operates as a conventional 12-pulse rectifier. The mathematical analysis presented in this paper corroborate, with detailed equations, the experimental results of two 6-kW prototypes implemented in a laboratory.
Resumo:
This work presents a comparative analysis about the behaviour of pile caps supported by 3 piles subjected to axial loading. Piles with 20 cm and 30 cm diameters were analysed. The main reinforcement was maintained in all the specimens, however, the arrangement of the secondary reinforcement varied. The main reinforcement consisted of steel bars connecting the piles. The secondary reinforcement was made up of: (a) bars going through the piles and through the projection of the column, (b) bars forming a network, and (c) vertical and horizontal stirrups. The main objective was the observation of the pile cap behaviour regarding the cracks and the modes of rupture. The real scale specimens were subjected to experimental tests until failure by rupture. Instruments were placed with the aim to obtain the displacement of the bases, the strains in the main and secondary reinforcement bars, in the compression struts, in the lower and upper nodal zones and in the sides of the caps. None of the caps reached failure by rupture with a load less than 1.12 times the theoretical load. The specimens ruptured due to the cracking of the compression strut and/or the yielding of the reinforcement bars in one direction.
Resumo:
Point positioning from GPS data can provide precision varying from 100 meters to a few millimeters at the level of 95% probability. To reach the best level of accuracy, users need proper equipment and software, as well as access capability to GPS products available at the International GPS Geodynamics Service. In this paper, the theory related to point positioning using GPS is presented as well as the results of an experiment conducted using data from the Brazilian Active Control System. The results show repeatability better than 5mm and 10mm for the N and E baseline components respectively, and 6mm + 4ppb (parts per billion) for the vertical. Comparison with SIRGAS campaign showed results at the same level of uncertainty as that of the stations used to tie the SIRGAS frame to ITRF94. Therefore, precise point positioning is a powerful tool to be used in applications requiring high level of precision, such as Geodynamics.
Resumo:
A prestressed concrete monoblock railroad tie was designed to attend the characteristics of a Brazilian railroad track with 1,600 mm gauge and 320 kN axle load. Concrete ties specimens were manufactured without and with steel fibers in a volume fraction of 60 kg/m3 (0.76 % by volume), and three different initial prestress forces. Static and fatigue tests were carried out on the ties. Static tests showed that steel fibers increase the first crack and ultimate bending moments, increase significantly the slip force of the prestressing tendons, reduce crack width, add higher ductility to the ties and decrease the stress in the prestressing tendons. Under dynamic loading the steel fibers decreased the stress in the prestressing tendons by about 50%, which improved significantly the fatigue strength of the tie. A tie without fibers failed after only 150,000 cycles. However, a similar tie, with fibers, resisted 3,000,000 cycles without suffering fatigue failure.
Resumo:
Different measurements were performed in cross-linked polyethylene (XLPE) employed as insulating material in coaxial cables that were field-aged and laboratory-aged under multi-stressing conditions at room temperature. Samples were peeled from the XLPE cable insulation in three different positions: just below the external semiconductor layer (outer layer), in the middle (middle layer) and just above the internal semiconductor layer of the cable (inner layer). The imaginary part of the electric susceptibility showed three peaks that obey the Dissado-Hill model. For laboratory-aged XLPE samples peeled from the inner and from the middle positions the peak at very low frequency region increased while in samples from the outer position a quasi-DC conduction process was observed. In medium frequency range a broadening of the peak was observed for all samples. Viscoelastic properties determined through dynamic mechanical analysis suggested that the aging generates processes that promoted changes of the crystallinity and the cross-linking degrees of the polymer. Fourier transform infrared spectroscopy (FTIR) measurements revealed an increase of oxidation products (esters), evidence of polar residues of the bow-tie tree and the presence of cross-linking by-products (acetophenone). Optical and scanning electronic microscope (SEM) measurements in aged samples revealed the existence of voids and bow-tie trees that were formed during aging in the middle region of the cable.
Resumo:
The Brazilian Network for Continuous Monitoring of GPS - RBMC, since its foundation in December of 1996, has been playing an essential role for the maintenance and user access of the fundamental geodetic frame in the country,. It provides users with a direct link to the Brazilian Geodetic System - SGB. Its role has become more relevant with the increasing use of space navigation technology in the country. Recently, Brazil adopted a new geodetic system, SIRGAS2000, in February 2005, fully compatible with GNSS technology. The paper provides an overview of the recent modernization phases the RBMC network has undergone highlighting its future steps. From its current post-mission mode, the RBMC will evolve into a real-time network, providing real-time data and real-time correction to users. The network enhanced with modern GPS receivers and the addition of atomic clocks will be used to compute WADGPS-type corrections to be transmitted, in real time, to users in Brazil and surrounding areas. It is estimated that users will be able to achieve a horizontal accuracy around 0.5 m (1σ) in static and kinematic positioning and better for dual frequency users. The availability of the WADGPS service will allow users to tie to the new SIRGAS2000 system in a more rapid and transparent way for positioning and navigation applications. It should be emphasized that support to post-mission static positioning will continue to be provided to users interested in higher accuracy levels. In addition to this, a post-mission Precise Point Positioning (PPP) service will be provided based on the one currently provided by the Geodetic Survey Division of NRCan (CSRS-PPP). The modernization of the RBMC is under development based on a cooperation signed at the end of 2004 with the University of New Brunswick, supported by the Canadian International Development Agency and the Brazilian Cooperation Agency. The Geodetic Survey Division of NRCan is also participating in this modernization effort under the same project.
Resumo:
The effects of several inspired oxygen fractions (FiO 2) on the respiratory dynamics in spontaneously breathing dogs submitted to continuous infusion of propofol were evaluated. Eight adult mongrel dogs were used. Each animal underwent five anesthesias, in each procedure the patient was allowed to breath a different FiO 2, thereby resulting in five groups, namely: G100 (FiO 2 = 1), G80 (FiO 2 = 0.8), G60 (FiO 2 =0.6), G40 (FiO 2 = 0.4), and G20 (FiO 2 = 0.21). To induce anesthesia, propofol was given until the animals allowed orotracheal intubation, followed by immediate continuous infusion of drug. The initial measurement (M0) was recorded thirty minutes after the infusion of propofol has begun. Additional recordings were performed at 15 minute intervals for 60 minutes (M15, M30, M45 and M60). Numeric data were submitted to Analysis of Variance followed by Tukey Test (p<0.05). We recorded significantly lower values of SpO 2 and SaO 2 at G20, whereas PaO 2 varied according to the changes in oxygen. Regarding PaCO 2, the mean of G100 was greater than G20 at M30. However, spontaneously breathing dogs anesthetized with propofol at the rate of 0.7mg/kg/min should not be provided with 100%, 80%, and 21% oxygen owing to the significant compromise of respiratory system.
Resumo:
The adequate level (0.12, 0.16, 0.20, 0.24, and 0.28%) of the dietary digestible tryptophan was evaluated in 400 laying Japanese quail from 21 to 30 weeks old. The animals were housed in laying cages, with initial weight of 158.50 g and egg production average of 84.50%. A completely randomized blocks design, with eight blocks, five diets, eight replicates of ten birds per replicate and three experimental periods of 21 days each was used. Feed intake (g/bird/day), digestible tryptophan intake (mg/bird/day), egg production (%/bird/day), egg weight (g), egg mass (kg/bird/day) and feed conversion (kg feed intake per kg eggs and dozen eggs) were the characteristics evaluated. Only the characteristics digestible tryptophan intake and egg production rate show significant effects of digestible tryptophan levels in the diets. Performance response of the Japanese quails in posture, regarding the adjustment obtained through models of linear regression and broken-line regression model, and the biological interpretation, allow to conclude that to obtain the best productive performance, the Japanese quails diets should contain the level of 0.21% digestible tryptophan, that results in a daily intake of 45.0 mg/ bird of digestible tryptophan, corresponding to the digestible tryptophan: digestible lysine ratio of 21%. © 2008 Sociedade Brasileira de Zootecnia.
Resumo:
The Brazilian Network for Continuous Monitoring of GPS - RBMC, since its foundation in December of 1996, has been playing an essential role for the maintenance and user access of the fundamental geodetic frame in the country. It provides to users a direct link to the Brazilian Geodetic System. Its role has become more relevant with the increasing use of space navigation technology in the country. Recently, Brazil adopted a new geodetic frame, SIRGAS2000, in February 2005, fully compatible with GNSS technology. The paper provides an overview of the recent modernization phases the RBMC network has undergone highlighting its future steps. From its current post-mission mode, the RBMC will evolve into a real-time network, providing real-time data and real-time correction to users. The network enhanced with modern GPS receivers and the addition of atomic clocks will be used to compute WADGPS-type corrections to be transmitted, in real time, to users in Brazil and surrounding areas. It is estimated that users will be able to achieve a horizontal accuracy around 0.5 m (1 σ) in static and kinematic positioning and better for dual frequency users. The availability of the WADGPS service will allow users to tie to the new SIRGAS2000 frame in a more rapid and transparent way for positioning and navigation applications. It should be emphasized that support to post-mission static positioning, will continue to be provided to users interested in higher accuracy levels. In addition to this, a post-mission Precise Point Positioning (PPP) service will be provided based on the one currently provided by the Geodetic Survey Division of NRCan (CSRS-PPP). The modernization of the RBMC is under development based on a cooperation signed at the end of 2004 with the University of New Brunswick, supported by the Canadian International Development Agency and the Brazilian Cooperation Agency. The Geodetic Survey Division of NRCan is also participating in this modernization effort under the same project. © Springer-Verlag Berlin Heidelberg 2009.
Resumo:
This paper adjusts decentralized OPF optimization to the AC power flow problem in power systems with interconnected areas operated by diferent transmission system operators (TSO). The proposed methodology allows finding the operation point of a particular area without explicit knowledge of network data of the other interconnected areas, being only necessary to exchange border information related to the tie-lines between areas. The methodology is based on the decomposition of the first-order optimality conditions of the AC power flow, which is formulated as a nonlinear programming problem. To allow better visualization of the concept of independent operation of each TSO, an artificial neural network have been used for computing border information of the interconnected TSOs. A multi-area Power Flow tool can be seen as a basic building block able to address a large number of problems under a multi-TSO competitive market philosophy. The IEEE RTS-96 power system is used in order to show the operation and effectiveness of the decentralized AC Power Flow. ©2010 IEEE.
Resumo:
In this paper a framework based on the decomposition of the first-order optimality conditions is described and applied to solve the Probabilistic Power Flow (PPF) problem in a coordinated but decentralized way in the context of multi-area power systems. The purpose of the decomposition framework is to solve the problem through a process of solving smaller subproblems, associated with each area of the power system, iteratively. This strategy allows the probabilistic analysis of the variables of interest, in a particular area, without explicit knowledge of network data of the other interconnected areas, being only necessary to exchange border information related to the tie-lines between areas. An efficient method for probabilistic analysis, considering uncertainty in n system loads, is applied. The proposal is to use a particular case of the point estimate method, known as Two-Point Estimate Method (TPM), rather than the traditional approach based on Monte Carlo simulation. The main feature of the TPM is that it only requires resolve 2n power flows for to obtain the behavior of any random variable. An iterative coordination algorithm between areas is also presented. This algorithm solves the Multi-Area PPF problem in a decentralized way, ensures the independent operation of each area and integrates the decomposition framework and the TPM appropriately. The IEEE RTS-96 system is used in order to show the operation and effectiveness of the proposed approach and the Monte Carlo simulations are used to validation of the results. © 2011 IEEE.
Resumo:
In order to evaluate the effects of replacement of dried corn (GSM) for silage moisture corn (HMCS) on production and milk composition were used five Holstein cows, primiparous with a mean of 112 days post delivery, confined in Tie Stall, for 70 days. We used five diets according to NRC to 17.5% CP (DM) and 2.4 Mcal / kg DM, the 40:60 ratio of roughage and concentrate containing soybean meal, sugar cane silage and hay and substitution levels of the GSM HMCS the following treatments: a) 0%, 2) 25%, 3) 50%, 4) 75% and 5) 100%. Milk production and dry matter intake (DMI) were recorded daily. The animals were milked daily 6:00 and 18:00 h, and milk samples collected from consecutive milkings of each experimental period of 14 days (four days of collection). The experimental design was a 5x5 Latin square and the data analyzed by the statistical program SAS. Body weight (508 kg), milk (23.6 kg), corrected milk (22.7 kg), DMI (17.13 kg) showed no significant difference, but the intakes of neutral detergent fiber (6.67 kg), and detergent acid (3.39 kg), feed efficiency for the production of milk (milk 1.41 kg / day) urea nitrogen (17.67 mg / dL) differ, thus indicating that HMCS is more efficient than GSM in the diet of dairy cows not alter the production and milk composition.
Resumo:
This paper presents evaluations among the most usual maximum power point tracking (MPPT) techniques, doing meaningful comparisons with respect to the amount of energy extracted from the photovoltaic (PV) panel [tracking factor (TF)] in relation to the available power, PV voltage ripple, dynamic response, and use of sensors. Using MatLab/Simulink and dSPACE platforms, a digitally controlled boost dc-dc converter was implemented and connected to an Agilent Solar Array E4350B simulator in order to verify the analytical procedures. The main experimental results are presented for conventional MPPT algorithms and improved MPPT algorithms named IC based on proportional-integral (PI) and perturb and observe based on PI. Moreover, the dynamic response and the TF are also evaluated using a user-friendly interface, which is capable of online program power profiles and computes the TF. Finally, a typical daily insulation is used in order to verify the experimental results for the main PV MPPT methods. © 2012 IEEE.
Resumo:
The aim of this study was to evaluate the survival rate, the intestinal microbiota, the mucosal integrity, and the carcass quality of juvenile Nile Tilapia, Oreochromis niloticus, after 80 days being fed on a diet containing probiotic additive (Bacillus cereus 4.0×108 CFUg-1 and Bacillus subtilis 4.0×108 CFUg-1), at the ratio of 4g/kg of pelleted feed. The completely randomized design with two treatments was used: one control group and one group fed on the mentioned diet. The evaluation of survival rate, the intestinal microbiota analysis by microbiological culture, histomorphometrical analysis of intestinal mucosa and chemical analysis of carcass was performed. The results showed that tilapias from the treated group had higher relative survival rate (P<0.05) than the control group, higher number of colony-forming units (P<0.05) regarding intestinal colonization by B. cereus and B. subtilis, and higher rates of intestinal mucosal integrity (P<0.05), evaluated by histomorphometry. As for the latter, the group being fed on feed with probiotic additive was observed to have higher and larger villi, besides having a higher number of goblet cells than the control group. Concerning the carcass quality, the results showed that there was positive interference (P<0.05) of the probiotic on the treated group in comparison to the control group as in regard to levels of protein and ether extract. These results allow the inference that the supplementation with probiotic, as tested in this experiment, led to the intestinal colonization by beneficial bacteria and resulted in higher relative survival rate, decreased the mucosal desquamation and helped in the increase of the number of goblet cells.
Resumo:
This study aimed to evaluate the environmental quality of the marine portion of Xixová-Japuí State Park (XJSP), an urban marine protected area, which is influenced by multiple contamination sources, by using ecotoxicological and geochemical analyses. Sediments were predominantly sandy, with low CaCO3 and organic matter contents, and presented contamination by metals (Cd,Cu,Zn). Acute toxicity was detected in three tested samples, and copepod exposed to sediments from four stations exhibited lower fecundities, despite the absence of significant effects. Contamination and toxicity seemed to be associated, suggesting that the environment is degraded and presents risks to the biota. Whole sediment TIE indicated ammonia as a main responsible for toxicity, suggesting sewage is a main contributor to sediment degradation. As external contamination sources seem to be negatively influencing the sediment quality, the park conservation objectives are not being fully reached, demanding actions to mitigate impacts. © 2013 Elsevier Ltd.