Estudos estruturais por dinâmica molecular do peptídeo Polybia-MPI via Replica Exchange

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estimativa da tendência diferencial do código nos receptores GNSS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Um estudo sobre as operações unitárias de agitação, troca de calor em tanques e mistura de pós

De todas as operações, a agitação de fluidos, a troca de calor em tanques e a mistura de pós são, sem dúvida, as mais usuais, principalmente, na indústria de alimentos. Embora exigindo um estudo em separado, é comum estas operações unitárias estarem presentes, em instantes diferentes, no mesmo processo de fabricação. O propósito deste trabalho é enfatizar procedimentos de projeto para problemas práticos nas indústrias de processos envolvendo estas três operações. O modelo matemático proposto para a agitação de fluidos foi aplicado na substituição das tradicionais âncoras por impelidores de pás retas e inclinadas no processamento do suco concentrado de laranja. Observou-se que o tempo de permanência do suco no tanque de resfriamento caiu de quarenta para cinco minutos em decorrência da maior ação de mistura provocada pelas pás retas. O modelo proposto acompanha bem as exigências de potências requeridas pelo suco na medida em que é resfriado...(Resumo completo, clicar acesso eletrônico abaixo)

Dinâmica da troca de calor através do bico do tucano-toco, Ramphastos toco (Piciformes, Ramphastidae)

A regulação da temperatura corpórea, diante de variações da temperatura ambiente e/ou da taxa de produção de calor metabólico, envolve mecanismos reguladores da taxa de troca de calor entre o animal e o ambiente. Um destes mecanismos consiste na modulação da temperatura superficial de áreas especificas do corpo do animal, via ajustes vasomotores, que podem atuar tanto no sentido de promover a dissipação de calor (em uma situação de aumento da temperatura) quanto na retenção deste (em uma situação de queda de temperatura). Neste contexto, alguns animais exibem partes do corpo, como orelhas, membros, cauda, etc. que funcionam de maneira otimizada para realizar esta troca de calor. Nestes casos, estas partes são referidas como “janelas térmicas” e possuem em comum três características básicas: 1 - alta área superficial; 2 - baixo isolamento térmico; 3 – boa vascularização e controle do fluxo sanguineo na dependência da temperatura. Recentemente, o uso do bico como uma janela térmica foi descrito para o tucano-toco, Ramphastos toco (Aves, Ramphastidae), revelando ser esta uma estrutura com a maior capacidade de troca térmica já identificada. Naquele estudo, porém, a temperatura superficial das aves (bico) foi monitorada enquanto elas eram submetidas a mudanças bastante lentas (ao longo de várias horas) da temperatura ambiente, de forma que a dinâmica temporal da resposta exibida pelas aves permanecia ainda bastante desconhecida. Além disso, sabe-se que os membros das aves também atuam como importantes vias para troca de calor com o ambiente, e no caso do tucano toco, a regulação da temperatura superficial desses apêndices frente a variações da temperatura não tinha sido estudada. Portanto, o objetivo do presente estudo foi investigar a velocidade com que os ajustes vasomotores subjacentes à modulação... (Resumo completo, clicar acesso eletrônico abaixo)

A contribuição de modelos utilizando uma abordagem modelo - código

In a world that is increasingly working with software, the need arises for effective approaches that encourage software reuse. The reuse practice must be aligned to a set of practices, procedures and methodologies that create a stable and high quality product. These questions produce new styles and approaches in the software engineering. In this way, this thesis aims to address concepts related to development and model-driven architecture. The model-driven approach provides significant aspects of the automated development, which helps it with produced models built in the specification phase. The definition of terms such as model, architecture and platform makes the focus becomes clearer, because for MDA and MDD is important to split between technical and business issues. Important processes are covered, so you can highlight the artifacts that are built into each stage of model-driven development. The stages of development: CSM, PIM, PSM and ISM, detailing the purpose of each phase in oriented models, making the end of each stage are gradually produced artifacts that may be specialized. The models are handled by different prospects for modeling, abstracting the concepts and building a set of details that portrays a specific scenario. This retraction can be a graphical or textual representation, however, in most cases is chosen a language modeling, for example, UML. In order to provide a practical view, this dissertation shows some tools that improve the construction of models and the code generate that assists in the development, keeping the documentation systemic. Finally, the paper presents a case study that refers to the theoretical aspects discussed throughout the dissertation, therefore it is expected that the architecture and the model-driven development may be able to explain important features to consider in software engineering

Mídia radical: análise comparativa entre a opinião da grande imprensa e da mídia radical no novo código florestal

The objective of this work is to compare how manifests the ideological positioning in the hegemonic media productions, according to Gramsci's conception, in relation to the radical alternative media, proposed by John Downing. The research has as opinionated content sample printed newspaper O Estado de s. Paulo, contrasting with the expressions of NON-PROFIT bauruense environmental “Instituto Ambiental Vidágua on the proposals of the new Brazilian forest Code. The analysis will hold in an interval between the adoption of the code by the Chamber of deputies in April 2012, and the provisional measure of President Dilma Rousseff with 32 modifications, after vetoing 12 articles proposed initially in may 2012. To support the study, will be crafted Gramsci hegemony; What is the alternative and radical media as it manifests itself; the relationship between the environmental journalism with the environmental NGOs; opinionated journalism and journalistic genres opinionated; theories of journalism and framing of matter

Análise da troca de calor em sistemas de injeção de termoplásticos – um estudo de caso: polipropileno

The purpose of this work was to define the processes through which the cooling of thermoplastics parts occur inside the mold cavity in an injection process. The plastic materials have become more widespread in the automobile industry and, among its manufacturing processes, injection moulding develops quickly, allowing the manufacturing of quality parts in great volumes. Data was collected from the injection of Volkswagen Gol NF 23X (Gol Generation 5). Using approximated methods for calculation for the heat Exchange inside the mould, in the cooling system, the required water flow was determined to properly cool the parts. Comparing the obtained value with Project specifications, it was verified that the method, in spite of incurring in some mistakes, is efficient in determining the flow of cooling fluid and serves as a verification tool for the parameters defined on project, and can be applied to simple projects. The definition of the cooling system, in practice, is dependent on innumerable variables and each case must be approached in itself, since the parameters for one product may not be ideal for another

Desenvolvimento de software livre/código aberto no Brasil

O presente trabalho propõe-se a discutir os determinantes do processo de desenvolvimento de software livre, seus efeitos na indústria de software e as ações do governo em relação a estas iniciativas Impulsionados, principalmente, pelos impactos dos avanços nas tecnologias de informação e comunicação e por inovações de processos relacionados a estes progressos, projetos de desenvolvimento de Software Livre/Código Aberto vêm crescendo em ritmo cada vez mais acelerado e tornando-se alvo de estratégias de empresas e políticas públicas. A partir desta constatação, o trabalho procura relacionar o arcabouço teórico que visa explicar estas iniciativas com dados da indústria brasileira de software e verificar como este modelo de produção pode modificar e agregar às suas feições. Foi realizado também um balanço das intervenções do governo brasileiro relacionadas a software livre/código aberto

Análise de algoritmos computacionais utilizados em sistemas de planejamento de braquiterapia de alta taxa de dose: estudo comparativo com o Código MCNP-5C

In radiotherapy, computational systems are used for radiation dose determination in the treatment’s volume and radiometric parameters quality analysis of equipment and field irradiated. Due to the increasing technological advancement, several research has been performed in brachytherapy for different computational algorithms development which may be incorporated to treatment planning systems, providing greater accuracy and confidence in the dose calculation. Informatics and information technology fields undergo constant updating and refinement, allowing the use Monte Carlo Method to simulate brachytherapy source dose distribution. The methodology formalization employed to dosimetric analysis is based mainly in the American Association of Physicists in Medicine (AAPM) studies, by Task Group nº 43 (TG-43) and protocols aimed at dosimetry of these radiation sources types. This work aims to analyze the feasibility of using the MCNP-5C (Monte Carlo N-Particle) code to obtain radiometric parameters of brachytherapy sources and so to study the radiation dose variation in the treatment planning. Simulations were performed for the radiation dose variation in the source plan and determined the dosimetric parameters required by TG-43 formalism for the characterization of the two high dose rate iridium-192 sources. The calculated values were compared with the presents in the literature, which were obtained with different Monte Carlo simulations codes. The results showed excellent consistency with the compared codes, enhancing MCNP-5C code the capacity and viability in the sources dosimetry employed in HDR brachytherapy. The method employed may suggest a possible incorporation of this code in the treatment planning systems provided by manufactures together with the equipment, since besides reducing acquisition cost, it can also make the used computational routines more comprehensive, facilitating the brachytherapy ...

Biodiversidade e código florestal em Botucatu, um estudo de caso

The brazilian legislation has sufored changes by the law no 1876/99, without the scientific community consultation, causing grave consequences for the country natural patrimony. The goal of this research is to investigate what the professors and students community of a São Paulo University know about the theme, as much as a rural and urban portion of persons; what they consider important and which atributes are taken in consideration. By the elaboration of closed questionnaires, qualitative and quantitative datas were collected, organized and analysed. The datas showed a low schooling by the countrified people, which reflected the low forest law knowledge. The distance between the university and society was also noticed, which indicates the lack of extension activities, ethical commitment against knowledge, technology and the sustainable development of the country. Due to, highlight the importance of extension activities towards the university, community and a knowledge future of all

Gigante pela própria natureza: discutindo o código florestal

Não disponível

Desenvolvimento de um código computacional para simulação e análise de espectros atômicos

The aim of this work was the development a computer code for simulation and analysis of atomic spectra from databases constructed from the literature. There were created four routines that can be useful for spectroscopic studies in the atomic processes of laser isotope separation. In the first routine, Possible Transitions, the program checks the possible electron transitions from an energy level of the atom present in the database considering the selection rules for an electric dipole transition. The second routine, Locator Transitions, checks the possible electronic transitions within a user-specified spectral region. The routine Spectra Simulator creates simulated spectra using the graphical application gnuplot through lorentzian curve and finally, the routine Electronic Temperature determines the temperature of electronic excitation of the atom, thought the Boltzmann Plot Method. To test the reliability of the program there were obtained experimental emission spectra of a hollow cathode discharge of dysprosium and argon as a buffer gas. The hollow cathode discharge has been subjected to different values of operating currents and pressure of inert gas. The spectra obtained were treated with the assistance of program routines developed (Transition Locator and Spectra Simulator) and temperatures electronic excitation of the atoms of dysprosium in the different discharge conditions were calculated (routine Electronic Temperature). The results showed that the electronic excitation temperature of the neutral dysprosium atoms in the hollow cathode discharge increases with increasing current applied to the cathode and also by increasing the gas pressure buffer. The determination coefficients, R2, obtained by the Electronic Temperature routine using the linear adjust of the Boltzmann Plot Method were greater... (Complete abstract click electronic access below)

Avaliação da membrana de troca aniônica DE 81 como ligante ba técnica de difusão em filmes finos por gradientes de concentração (DGT) para a determinação de Cromo VI

It is known that there is a wide variety of bioavailable trace metals in aquatic systems, and its determination is fundamental to predict impacts to organisms in these environments. However, the determination of the total concentration of chemicals in aquatic systems, despite its importance, does not provide necessary information for decision making or even may lead to misinterpretation of the procedures and potential risks to the system in question. This study aimed to use the technique of diffusion in thin films by concentration gradients (DGT) to evaluate the anion exchange membrane Whatman DE 81 as binder alternative in determining Cr (VI). Experiments were carried out to determine the diffusion coefficients for the material used diffusion (agarose gel). The behaviors of the binders were analyzed before the main variables of the systems, immersion time, pH and ionic strength. Then was made the assessment of potential interferences, to finally proceed with testing using actual samples in the laboratory and in situ

Concepção e Implementação de um Sistema de Controle de Arborização Urbana através da Integração de Softwares Livres e de Código Aberto

Suitable computacional tools allow to build applications that can link information to its physical location, and represent them into visual and interactive schemes, e ectively reaching the power of visual comunication. This leads the user to synthesize information in a simple and e cient way. These applications are linked to the de nition of Geographic Information System (GIS). GIS are comprised by many concepts and tools, which have the main purpose of collecting, storing, viewing and processing spatial data, obtaining the information needed for decision making. Within this context, this paper presents the Conception and Implementation of a Control System for Urban Forestry through Integration of Free and Open Source Software. This conception arose from the need of an Environmental Project developed by the Agriculture's House of the city of Regente Feij o, which has as main objectives cataloging and management of urban a orestation of the municipality. Due to this diversity of concepts, the challenge in building this system is the integration of platforms that are involved in all stages: collecting and storage of data, including maps and other spatial information, operations on the stored information, obtaining results and graphical visualization of the same. After implementation, it was possible to provide for the system users an improvement in the capacity of perception in the information analysis and facilitate the process of decision making