50 resultados para spreadsheet


Relevância:

10.00% 10.00%

Publicador:

Resumo:

There is a growing search for continuous improvement within the companies which creates an obligation of reducing and when it is possible eliminating waste. Production Planning and Control Department (PCP) is not out of this question, making necessary the application of methods and creation of tools that eliminate steps which do not add value to the planning process. This paper aims to develop a tool which concentrates in just one place all the necessary information to make the packaging material requirement planning (MRP) in a agribusiness company. Besides, it also aims, in a more visual way and using devices that prevent mistakes (Poka-Yoke), to reduce the number of reviews and mistakes made by analysts. As a result, an Excel spreadsheet was developed. This spreadsheet shows what happens with the status of planning and receiving of packaging, giving some advices when some critical situation happens. The use of Lean Manufacturing Method and the action research method helped to well define the problem and to reduce the number of steps, spreadsheets and time of process in 80%, 60% and 75%, respectively

Relevância:

10.00% 10.00%

Publicador:

Resumo:

When a bolted joint is loaded in tension with dynamically, part of this load is absorbed by the bolt and rest is absorbed by the joint material. What determines the portion that is to absorbed by the bolt is the joint stiffness factor. This factor influences the tension which corresponds to pre-load and the safety factor for fatigue failure, thus being an important factor in the design of bolted joints. In this work, three methods of calculating the stiffness factor are compared through a spreadsheet in Excel software. The ratio of initial pre-load and the safety factor for fatigue failure depending on the stiffness factor graph is generated. The calculations for each method show results with a small difference. It is therefore recommended that each project case is analyzed, and depending on its conditions and the range of stiffness values, the more or less rigid method about the safety factor for fatigue failure is chosen. In general, the approximation method provides consistent results and can be easily calculated

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The burn is among the leading causes of morbidity and mortality in our society. It shows a great complexity and is hard to treat. Beyond the physical suffering, the burned patient is affected by psychological distress, requiring a high level of knowledge for assistance planning. The Professional Practice Law No. 7498 establishes the nurse as in charge of the client, as leader of the nursing team and as responsable for the management of physical and human resources. The nurse has autonomy to design the quantitative and qualitative picture of the nursing staff and should use the methodologies for their suitability to the real levels of assistance needed. Material resources represent 15 to 25% of total expenditures at health organizations. Therefore, to maintain the care level, nurses must determine the needs, considering the quantitative, qualitative and financial aspects. The study aimed the survey of the human and material resources necessary for nursing care to patients in a Burns Treatment Unit and identify its epidemiological profile and its nursing diagnoses. We collected the data from medical records of hospitalized between July and August, and the nursing diagnoses were classified through the Taxonomy II proposed by the North American Nursing Diagnosis Association (NANDA). The design of the picture of nurses followed the parameters of COFEN Resolution nº 293/2004. We apply the Fugulin's Patients Classification System to establish levels of the required care. The institution's Cost Center provided a spreadsheet with the purchased items, subsequently classified into ABC. Most hospitalized patients were men, aged between 20 and 50. There was a predominance of patiences with minor burned and the most common type of burn was due to fire. The average residence time was 28.71 days, and 88% of the patients were discharged... (Complete abstract click electronic access below)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This paper deals with a case study of assessing risk to human health, with the study area of an industrial site in the city of Paulinia (SP) contaminated by oil, which is disturbing situation that occurs in the state of Sao Paulo, which represents risks for human health, as toxic and carcinogenic potential of petroleum products. As an essential foundation for risk assessment, a Geo-environmental diagnosis of the region was made, posing as historical information of the area and accidents, regional geology and hydrogeology, characterization of contaminants and affected media, contaminant transport and data on potential receptors and pathways. Because of the detection of contaminants above the intervention values CETESB (2005) it was possible to proceeded to quantify risks to human health and the determination of maximum acceptable concentrations for no damage to health, using the methodology and software RBCA Tier 2 (ASTM , 1998) and Spreadsheet Risk Assessment recently published by CETESB. The results showed the risk to the health of industrial workers and regular employees of civil works (both on site) for ingestion of groundwater and inhalation of vapors indoors.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Radiotherapy in veterinary practice is already known and widely distributed in large specialized centers of developed countries. In early 2000, there were about 30 radiotherapy equipment specifically designed for the veterinary clinic in the United States. In Brazil, the veterinary radiotherapy is still confined to research in universities, where most of the procedures is radiation therapy performed with superficial x-ray machines, with a voltage between 50 and 150 kVp, focus-distance surface (DFS) between 20,0cm and 40,0cm. As that occurs in human medicine, new research strengthens the development and prospects for the use of radiotherapy as a safe option for treating cancer in animals. This paper presents a methodology for calculating the exposure time for superficial radiotherapy procedures in veterinary medicine for small animals (dogs and cats). The dosimetric parameters of X-rays are determined using a spreadsheet tool for Microsoft Office Excel, developed in this paper for a device Dermopan 2, Veterinary Hospital of UNESP in Araçatuba. Using the worksheet helps the veterinarian to determine the time of exposure to radiation determined for each clinical case, optimize the workflow for professionals in veterinary radiotherapy procedures, which often lack the medical physics in team and at the time of radiotherapy. The correct use of spreadsheet decreases the chances of errors in dose rates of radiation, providing a higher quality of care

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The financial health of a family is one of the main generators of quality of life, and this is only possible through financial planning, which is nothing more than save and analyze before contracting debts. To do this, students must have notion of financial mathematics, especially of that used by the banks on overdraft interest, in investments and in the short-term and longterm loans, that is, compound interest, equivalent rates, depreciation and others. Starting from the knowledge of arithmetic and geometric progressions and, based on real situations which allow the application of the content learned, one intends to develop activities applied to high education. To start from real situations is one of the main lines of thought of the Problem Solving Methodology, in which the student is the active agent in the construction of his or her knowledge. As the National Curricular Parameters point out, the practice in the use of computers is essential for gaining a job. Therefore, this project proposes an activity where knowledge of Financial Mathematics can to be practiced, associated with the use of Microsoft Excel® spreadsheet

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Radiotherapy in veterinary practice is already known and widely distributed in large specialized centers of developed countries. In early 2000, there were about 30 radiotherapy equipment specifically designed for the veterinary clinic in the United States. In Brazil, the veterinary radiotherapy is still confined to research in universities, where most of the procedures is radiation therapy performed with superficial x-ray machines, with a voltage between 50 and 150 kVp, focus-distance surface (DFS) between 20,0cm and 40,0cm. As that occurs in human medicine, new research strengthens the development and prospects for the use of radiotherapy as a safe option for treating cancer in animals. This paper presents a methodology for calculating the exposure time for superficial radiotherapy procedures in veterinary medicine for small animals (dogs and cats). The dosimetric parameters of X-rays are determined using a spreadsheet tool for Microsoft Office Excel, developed in this paper for a device Dermopan 2, Veterinary Hospital of UNESP in Araçatuba. Using the worksheet helps the veterinarian to determine the time of exposure to radiation determined for each clinical case, optimize the workflow for professionals in veterinary radiotherapy procedures, which often lack the medical physics in team and at the time of radiotherapy. The correct use of spreadsheet decreases the chances of errors in dose rates of radiation, providing a higher quality of care

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The objective of this work is to study the implantation feasibility of a small hydropower system in a rural area in Guaratinguetá. Due to its location and accessibility, and the costs involved in extending the public distribution line to the property it could turn become viable the construction of an individual electric generation system. As alternatives, a solar photovoltaic system and combustion engine-electric generator systems were considered. However, the existence of a small river inside the property, the construction of a micro hydropower plant was taken into account. The choice of the micro power hydropower plant was determined by the owner and was based on the costs. The topographic and hydrological profiles as well as the geometrical characteristics of the system, including the civil infrastructure needed and the more adequate turbine, were determined. Finally, the cost spreadsheet was set and the results were compared with those calculated for the extension of the available public distribution system

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Educação Matemática - IGCE

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The process of steel production emits a large quantity of greenhouse gases, specifically carbon dioxide (CO2), and the reduction of such emissions is one of the main challenges for the industry in the 21st. Century. To quantify these emissions, the Worldsteel Association (association of the 170 large steel manufacturers of the world) published a methodology (CO2 Emission Data Collection) for calculation and comparison of CO2 emissions among its members. After that, in 2010, this methodology became an ISO (International Organization for Standardization) norm. Today, the calculation of the CO2 emissions in steel making companies follow the ISO 14404-1 for units with blast furnaces and the ISO 14404-2 for units with electric furnaces. In the last years, new technologies were and continue to be developed for the steel making sector aiming at energetic improvements and greenhouse gas reductions (mainly CO2) by the several processes involved in the production of steel. This work had the objective of producing a tool to calculate the CO2 emissions for the steel making sector. An Excel spreadsheet was developed to calculate the emission intensities of CO2 of a steel plant, the Usina Presidente Vargas, of the Companhia Siderúrgica Nacional (CSN). The spreadsheet furnishes results of CO2 emissions and energetic fluxes, and simulates the benefits that some of the new technologies can give to the company. The spreadsheet calculates the emissions in two ways: a) based on the carbon fluxes that enter the unit, and b) based on the emissions of each specific process within the unit (coking, sinterization, blast furnace, among others)

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Pós-graduação em Design - FAAC

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)