Electrical conductivity and pH of the substrate solution in gerbera cultivars under fertigation

The quality and the profitability on floriculture are intimately linked to the adequate plant nutrition. In the present research we aimed to evaluate the electrical conductivity (EC) and pH of the substrate solution on four different gerbera cultivars subjected to fertigation, with two nutritive solutions. The experiment was carried out in a greenhouse, from May to July 2006, on the Universidade Estadual Paulista, Botucatu, São Paulo state, Brazil. The experiment was carried out under an experimental design of random blocks, in 4×2 factorial arrangement, with four Gerbera cultivars (Cherry, Golden Yellow, Salmon Rose and Orange) and two nutritive solution concentrations: 0.92 and 1.76 dS m-1 EC) during the vegetative stage, and 1.07 and 2.04 dS m-1 during the reproductive stage (S1 and S2, respectively). The nutrients were applied through fertigation, manually performed every day. The EC and pH values of the substrate solution were evaluated weekly, using the 'pourthru' method. Orange and Cherry cultivars had, respectively, the highest and the lowest electrical conductivity of the substrate solution, and Cherry was the most efficient on the nutrient uptake. The solution S2 showed a trend to accumulate salts in the substrate, but without visual symptoms of plant toxicity, leading to the lowest pH values. The 'pourthru' method was efficient when compared to the 1:2 method and can be adopted for substrate solution analysis in gerbera culture.

Effects of levomepromazine and different desflurane concentrations upon electrocardiographic variables in dogs

Objectives To investigate the effects of levomepromazine and different desflurane concentrations upon electrocardiographic variables.Animals Twenty adult mongrel dogs of both sexes weighing 6-28 kg.Methods Dogs were divided into two groups of 10 animals. Group I received 1 mg kg(-1) lV of levomepromazine and 15 minutes later anesthesia was induced with propofol (3 mg kg(-1) IV). Desflurane end-tidal concentration was set at 1.6 MAC. After 30 minutes at this concentration, measurements were taken and the end-tidal concentration was reduced to 1.4 MAC. Thereafter, it was reduced to 1.2 and then 1.0 MAC at 1.5-minute intervals. The same procedure was followed for group 2, except that levomepromazine was replaced with 0.2 mL kg(-1) of 0.9% saline solution and more propofol was needed for induction (7 mg kg(-1)). The animals' body temperature was maintained between 38.3 and 39 degreesC using a heating pad. The electrocardiographic tracing was obtained from lead II throughout the experimental period. The measurements were taken immediately before the administration of levomepromazine or placebo (T-1), 15 minutes after pre-medication (T-2) and 30 minutes after the establishment of 1.6 MAC (T-3)The other measurements were made at the concentrations of 1.4, 1.2, and 1.0 MAC, respectively (T4-6). The numerical data were submitted to analysis of variance plus F-test (p < 0.05).Results the dogs that received levomepromazine had a decrease in heart rate. However, in both groups it increased with desflurane administration. Levomepromazine, in association with desflurane, did not induce significant electrocardiographic changes, and all mean values (except P-wave duration) were within the reference range for this species.Conclusions and clinical relevance This study documented that levomepromazine, in association with desflurane, does not induce significant changes in electrocardiographic variables, suggesting that this drug combination has minimal effect on myocardial conduction.

Long-term facial artery catheter implantation for serial arterial blood sampling and invasive arterial blood pressure measurement in horses

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeito da calagem e sulfato de amônio no algodão: II - Concentração de cátions e ânions na solução do solo e absorção de nutrientes pelas plantas

No sistema de semeadura direta, o calcário tem sido aplicado superficialmente para evitar o revolvimento do solo. Os ânions adicionados via adubação nitrogenada podem aumentar a solubilização de sais de cátions básicos do solo graças à formação de pares iônicos. O objetivo deste trabalho foi estudar a dinâmica dos ânions NO3- e SO4(2-) e dos cátions NH4+, Ca2+, Mg2+ e K+ da solução do solo, bem como a absorção de nutrientes pelo algodoeiro submetido a distintas formas de aplicação de calcário e diferentes doses de sulfato de amônio em cobertura, cultivado com a presença de palha na superfície do solo. Utilizou-se um Latossolo Vermelho distroférrico de textura média que foi acomodado em vasos com 15,71 dm³. Plantas de algodão (Gossypium hirsutum) foram cultivadas por 60 dias nas condições de calagem superficial sobre a palha, calagem incorporada a 0-20 cm de profundidade e ausência de correção do solo, com a aplicação de doses de sulfato de amônio equivalentes a 0, 50, 100 e 150 kg ha-1 de N em cobertura. Cápsulas porosas foram instaladas para amostragem e quantificação de nutrientes da solução do solo. A concentração de SO4(2-) da solução do solo foi incrementada pela adubação nitrogenada, independentemente da forma de aplicação do calcário. A curto prazo, a nitrificação do NH4+ aplicado foi favorecida somente com a calagem incorporada, apesar de o N nítrico da solução do solo ter aumentado no final do cultivo do algodão até mesmo no solo não corrigido. As concentrações de Ca, Mg e K da solução do solo foram incrementadas pela adubação de cobertura. O ânion SO4(2-) apresentou maior afinidade do que o NO3- na formação de pares iônicos com os cátions básicos da solução do solo. A adubação nitrogenada proporcionou maior eficiência na absorção de Ca e Mg pelo algodoeiro na condição de calagem incorporada.

Comparison of the properties of compacted and porous lamellar chitosan-xanthan membranes as dressings and scaffolds for the treatment of skin lesions

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Off line extraction of phenol from human urine sample with isoamyl alcohol and determination by HPLC

This method has been developed for extraction and determination of phenol in a urine sample by high performance liquid chromatography.After acid hydrolysis, the free phenol was extracted with isoamyl alcohol solvent, followed by back extraction with 0.5 mol.L-1 sodium hydroxide solution and analyzed by an isocratic HPLC Varian System, equipped with reverse-phase column (MicroPak-C-18). The mobile phase was acetonitrile in 0.01 mol.L-1 hydrochloric acid solution, (20:80 v/v), and at a now-rate of 1.0 mL.min-1. The chromatogram was monitored at 220 nm in room temperature. The identification was based on retention time and the quantification was performed by automatic peak-area determination, corrected for the external standards method.The recovery was higher than 99.5 % for phenol and reproducibility of method was shown to be 2.3% standard deviation and 5.6% coefficient of variance (n=20). The limit detection was 0.05 mgL(-1) and a range of 0.05 to 20.0 mgL(-1) of phenol for linearity.

Nonsurgical Periodontal Therapy Combined with Laser and Photodynamic Therapies for Periodontal Disease in Immunosuppressed Rats

Background. Periodontal disease is often associated with systemic diseases and is characterized by destruction of the tissues supporting the teeth. Patients using immunosuppressive drugs such as tacrolimus are among those who suffer from tissue destruction. Objective. We sought to evaluate the effects of laser and photodynamic therapies (PDT; nonsurgical) as an adjunct to scaling and rootplaning (SRP) in the treatment of corona-induced periodontitis in rats immunosuppressed with tacrolimus (Prograf).Materials and Methods. The animals were divided into 5 groups. Each groups had 6 rats. Group I, the control group, received only saline solution throughout the study period of 42 days and did not receive periodontal treatment; group II received saline solution and SRP; group III received tacrolimus (1 mg/kg per day) and was treated with SRP; group IV animals were treated identically to group III and then administered laser treatment; and in group V, the animals were treated identically to group III and then administered PDT.Results. Statistical analysis indicated decreased bone loss with the progression of time (P = .035). There was no difference between the bone loss associated with the types of treatment administered to groups I, II, and III (P > .9) or groups IV and V (P > .6). The analysis also indicated that immunosuppression was not a bone loss-determining factor.Conclusion. Laser and PDT therapies were effective as an adjunctive treatment to SRP in reducing bone loss caused by experimental periodontitis induced in animals being treated systemically with tacrolimus.

Evaluation of two alternative methods for disinfection of toothbrushes and tongue scrapers

Objective: The aim of this study was to investigate the effectiveness of two alternatives methods for the disinfection of oral cleaning devices. Methods: One type of toothbrush and two types of tongue scrapers (steel and plastic) were tested in this study. Sixteen specimens of each group were cut with standardized dimensions, contaminated separately with Candida albicans, Streptococcus mutans and Staphylococcus aureus and incubated for 24 h. After this, oral cleaning devices were washed in saline solution to remove non-adhered cells and divided into two groups (n = 8), one irradiated in microwave and other immersed in 3.78% sodium perborate solution, and evaluated for microbial recovery. The values of cfu of each group of microorganism after disinfection were compared by Kruskal-Wallis and Dunn non-parametric test, considering 95% of confidence. Results: The toothbrush harboured a significant larger number of viable organisms than the tongue scrapers. The steel tongue scraper was less susceptible to adhesion of the three oral microorganisms. The time required to inactivate all contaminating microorganisms using microwave oven was 1 min and, for the immersion in 3.78% sodium perborate solution, was 2 and 3 h, respectively, for C. albicans and S. mutans/S. aureus. Conclusion: Microwave irradiation proved to be an effective alternative method to the disinfection of tongue cleaners and toothbrushes.

Changes in roughness of denture base and reline materials by chemical disinfection or microwave irradiation: Surface roughness of denture base and reline materials

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effectiveness of two disinfectant solutions and microwave irradiation in disinfecting complete dentures contaminated with methicillin-resistant Staphylococcus aureus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morphological evidences indicate that the interference of cimetidine on the peritubular components is responsible for detachment and apoptosis of Sertoli cells

Cimetidine, referred as antiandrogenic agent, has caused alterations in the seminiferous tubules, including alterations in the peritubular tissue and death of myoid cells by apoptosis. Regarding the structural and functional importance of the peritubular tissue for the maintenance of Sertoli cells (SC), we purpose to investigate the SC-basement membrane interface, focusing the morphological features of SC and their interaction with the basement membrane in the affected tubules by cimetidine. Ten animals were distributed into two groups, control (CG) and cimetidine (CmG) which received saline solution and 50 mg of cimetidine per kg of body weight, respectively, for 52 days. The testes were fixed, dehydrated and embedded for analyses under light and transmission electron microscopy. Paraffin sections were submitted to the TUNEL method; sections of testes embedded in glycol methacrylate were submitted to PAS method and stained by H&E for morphological and quantitative analyses of Sertoli Cells. In the CmG, the SC nuclei were positive to the TUNEL method and showed typical morphological alterations of cell death by apoptosis (from early to advanced stages). A significant reduction in the number of Sertoli Cells was probably due to death of these cells by apoptosis. A close relationship between SC nuclear alterations (including a high frequency of dislocated nuclei from the basal portion) and damage in the peritubular tissue was observed. The ultrastructural analysis showed a parallelism between the gradual advancement of apoptotic process in SC and detachment of the anchoring sites (hemidesmosomes) of SC plasma membrane from the lamina densa. The presence of portions of lamina densa underlying the detached hemidesmosomes indicates a continuous deposition of lamina densa, resulting in the thickening of the basal lamina. The results indicate a possible disarrangement of the SC cytoskeleton, including the focal adhesion structure. These alterations are related to SC apoptosis and probably result from disturbs induced by cimetidine on the peritubular tissue.

Evaluation of pH and Calcium Ion Release of Calcium Hydroxide Pastes Containing Different Substances

Introduction: The objective of this study was to evaluate the pH and calcium ion release of calcium hydroxide pastes associated with different substances. Methods: Forty acrylic teeth with simulated root canals were divided into 4 groups according to the substance associated to the calcium hydroxide paste: chlorhexidine (CHX) in 2 formulations (1% solution and 2% gel), Casearia sylvestris Sw extract, and propylene glycol (control). The teeth with pastes and sealed coronal accesses were immersed in 10 mL deionized water. After 10 minutes, 24 hours, 48 hours, and 7, 15, and 30 days, the teeth were removed to another container, and the liquid was analyzed. Calcium ion release was measured by atomic absorption spectrophotometry, and pH readings were made with a pH meter. Data were analyzed statistically by analysis of variance and Tukey test (alpha = 0.05). Results: Calcium analysis revealed significant differences (P < .05) for 1% CHX solution and 2% CHX gel at 10 minutes. After 24 hours, 2% CHX gel x Control and 2% CHX gel x 1% CHX solution differed significantly (P < .05). After 48 hours, there were significant differences (P < .05) for 2% CHX gel x Control and Extract x Control. No differences (P > .05) were observed among groups in the other periods. Regarding the pH, there were significant differences (P < .05) for 2% CHX gel x Control and 2% CHX gel x 1% CHX solution after 48 hours and for 2% CHX gel x Control after 15 days. In the other periods, no differences (P > .05) were observed among groups. Conclusions: All pastes behaved similarly in terms of pH and calcium ion release in the studied periods. (J Endod 2009;35:1274-1277)

Evaluation of the physical and chemical properties of two commercial and three experimental root-end filling materials

Objective. The aim of this study was to evaluate the pH, calcium release, setting time, and solubility of two commercially available mineral trioxide aggregate (MTA) cements (white MTA Angelus and MTA Bio), and of three experimental cements (light-cured MTA, Portland cement with 20% bismuth oxide and 5% calcium sulfate, and an epoxy resin-based cement).Study design. For evaluation of pH and calcium ion release, polyethylene tubes with 1.0 mm internal diameter and 10.0 mm length were filled with the cements and immediately immersed in flasks containing 10 mL deionized water. After 3, 24, 72, and 168 hours, the tubes were removed and the water from the previous container was measured for its pH and calcium content with a pH meter and an atomic absorption spectrophotometer. For analysis of the setting time, Gilmore needles weighing 100 g and 456.5 g were used, in accordance with the American Society for Testing and Materials specification no. C266-03. Solubility of each cement was also tested.Results. All the cements were alkaline and released calcium ions, with a declining trend over time. After 3 hours, Portland cement + bismuth oxide and MTA Bio had the highest pH and light-cured MTA the lowest. After 1 week, MTA Bio had the highest pH and light-cured MTA and epoxy resin-based cement the lowest. Regarding calcium ion release, after 3 hours, Portland cement + bismuth oxide showed the highest release. After 1 week, MTA Bio had the highest. Epoxy resin-based cement and light-cured MTA had the lowest calcium release in all evaluation periods. Regarding setting times, white MTA Angelus and MTA Bio had the shortest, Portland cement + bismuth oxide had an intermediate setting time, and the epoxy resin-based cement had the longest. The materials that showed the lowest solubility values were the epoxy resin-based cement, Portland cement + bismuth oxide, and light-cured MTA. The highest solubility values were presented in white MTA Angelus and MTA Bio.Conclusions. The white MTA Angelus and MTA Bio had the shortest setting times, higher pH and calcium ion release, and the highest solubility. In contrast, the epoxy resin-based cement and light-cured MTA showed lower values of solubility, pH, and calcium ion release. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2010; 110: 250-256)

IGFR-I expression and structural analysis of the hard palatine mucosa in an ethanol-drinking rat strain (UChA and UChB)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Storage temperature and quality of red mombin fruits (Spondias purpurea L.)

The aim was to study the effect of different storage temperatures on quality of red mombin fruit. The red mombin fruits were obtained from the Company CEAGESP/São Paulo/Brazil and transported in cool boxes to the laboratory, where they were selected on the base of appearance, maturity lack of physical damage, sanitized in 50 ppm chlorine-free solution and packaged in polystyrene trays wrapped with film of polyvinyl chloride (PVC). The experiment was a completely randomized design with three temperatures (4, 8 and 25 degrees C) and 5 time intervals (0, 2, 4, 6 and 8 days after the experiment installation). In each survey firmness, titratable acidity, soluble solids, ascorbic acid content, the skin color and also the release of CO(2) by the fruit over time were evaluated. It was observed that low temperatures prolong the fruits shelf life and the storage temperature influences the characteristics, the temperature of 8 degrees C was most suitable for the storage of red mombin fruits. Besides, the fruit color was a good indicator of changes in the pulp during storage.