Estimativa da ingestão voluntária a partir das características de degradação do capim-coastcross (Cynodon dactylon L. Pers.), sob pastejo, por vacas em lactação

O consumo de matéria seca (CMS) do capim-coastcross, sob pastejo, de vacas lactantes mestiças (HPB x Gir) e Gir, foi calculado a partir da relação entre a digestibilidade in vitro da MS (DIVMS) da forragem (extrusa colhida com animais esôfago- fistulados) e a produção fecal obtida com auxílio do cromo mordante por meio de um modelo não-linear. A pastagem foi manejada com uma taxa de lotação de 1,6 e 3,2 animais/ha, respectivamente para as épocas seca e chuvosa do ano, num sistema de pastejo rotativo com três dias de ocupação e 27 dias de descanso. Quatro diferentes equações baseadas em variáveis de degradação ruminal foram utilizadas para predizer o consumo de MS: CMS = -1,19 + 0,035 (a+ b) + 28,5c (1), CMS = -0,822 + 0,0748 (a+ b) + 40,7c (2), CMS = -8,286 + 0,266a + 0,102b +17,696c (3) e CMS = [%FDN na MS]* [consumo de FDN ] / [(1-a-b)/K P +b/(c+ k p)]/24] (4). Os dados observados utilizando as equações 1 e 2 (12,2 e 12,7 kg/vaca/dia respectivamente) foram similares entre si e superiores aos resultados obtidos na equação 4 (7,8 kg/vaca/dia). Já o resultado obtido pela equação 3 (5,5 kg/vaca/dia) foi menor do que aqueles determinados pelas outras equações, subestimando o CMS calculado a partir do cromo mordante (6,3 kg/vaca/dia). A predição do consumo de forrageiras tropicais sob pastejo, utilizando equações baseadas nas variáveis de degradação, constitui um importante potencial para estas avaliações. Entretanto, mais estudos devem ser realizados antes de se usarem estas equações na prática.

Efeito do dia de ocupação sobre a produção leiteira de vacas mestiças em pastejo rotacionado de forrageiras tropicais

O trabalho foi conduzido para se observar as flutuações na produção leiteira de vacas mestiças em sistema de pastejo rotacionado de capim-elefante cv. Guaçu (Pennisetum purpureum Schum.) e capim-tanzânia (Panicum maximum Jacq.), de acordo com períodos de ocupação (dois dias de ocupação e 40 de descanso e três dias de ocupação e 33 de descanso, respectivamente), adubados com 200 kg de N/ha/ano. Foram estudados 19 piquetes de capim-elefante e 15 de capim-tanzânia. A análise estatística foi realizada considerando-se fase de lactação das vacas, piquete e dia de ocupação. Para o capim-elefante houve efeito da fase da lactação com interação com o dia de ocupação, mas não houve diferença para o dia de ocupação. As médias foram 10,3 ± 3,3 e 10,4 ± 3,2 kg de leite/vaca/dia para o 1º e 2º dia de ocupação, respectivamente. Para o capim-tanzânia, houve diferença significativa na produção de leite, conforme o dia de ocupação, e interação significativa para piquete e dia de ocupação. As médias foram 10,6 ± 3,0; 11,0 ± 3,1; 10,6 ± 3,2 kg de leite/vaca/dia, respectivamente, para o primeiro, segundo e terceiro dias de ocupação.

Concentração de nitrogênio uréico plasmático (NUP) e produção de leite de vacas mestiças mantidas em gramíneas tropicais sob pastejo rotacionado

O trabalho foi realizado com o objetivo de estudar os níveis de nitrogênio uréico plasmático (NUP) de vacas mestiças leiteiras mantidas em duas áreas de pastejo rotacionado, uma de capim-elefante cv. Guaçu (Pennisetum purpureum Schum. cv. Guaçu) e outra de capim-Tanzânia (Panicum maximum Jacq. cv. Tanzânia). Foram avaliadas a produção de forragem e as frações colmo, folha e material morto, com base na matéria seca (MS), bem como os teores de proteína bruta (PB) e fibra em detergente neutro (FDN) nas amostras de forragem. O sangue foi coletado em quatro épocas, utilizando-se 16 vacas por espécie de capim. A média da massa de forragem pré-pastejo foi de 5.321 e 5.384 kg de MS/ha por ciclo de pastejo para o capim-elefante e capim-Tanzânia, respectivamente. A forragem desaparecida pós-pastejo, referente à folha, ao colmo e ao material morto foi de 1.400, 620 e 443 kg de MS/ha para o capim-elefante e de 1.586, 736 e 132 kg de MS/ha para o capim-Tanzânia, por ciclo de pastejo. As médias de quatro ciclos de pastejo de PB e FDN nas amostras da planta inteira, colmo, folha, material morto e resíduo foram de 8,4; 78,5; 6,9; 77,1; 12,5; 76,3; 5,3; 82,6; 6,5; 80,2, respectivamente, para o capim-elefante, e de 9,3; 81,6; 7,4; 82,4; 14,3; 80,4; 6,3; 82,9; 7,6; 81,6, respectivamente, para o capim-Tanzânia. Foi encontrada diferença significativa nos níveis de NUP das vacas alimentadas nas diferentes espécies de capim e por época de amostragem do sangue. As médias de NUP foram 9,8 mg/dL para as vacas mantidas no capim-elefante e 10,6 mg/dL para as vacas mantidas no capim-Tanzânia. Os baixos níveis de NUP encontrados refletem a baixa ingestão de proteína bruta por vacas manejadas em pastagens tropicais.

Resposta do híbrido de sorgo-sudão à adubação nitrogenada e potássica: composição química e digestibilidade in vitro da matéria orgânica

A pesquisa foi instalada no Setor de Forragicultura da FCAV/UNESP-Jaboticabal, objetivando avaliar a composição química e a digestibilidade in vitro da matéria orgânica (DIVMO) do híbrido de Sorgo-sudão cv. AG 2501C, no outono e inverno. O manejo da pastagem foi conduzido simulando o sistema de lotação intermitente. O experimento foi desenvolvido de março a setembro de 2002. A forrageira foi submetida a nove tratamentos: três níveis de nitrogênio (100, 200 e 300 kg de N/ha) e três níveis de potássio (0, 80 e 160 kg de K2O/ha), em delineamento experimental em blocos casualizados e parcelas subdivididas. A adubação nitrogenada e potássica não foram significativas para a DIVMO. O nitrogênio influenciou a proteína bruta (PB) com valores de 15,1; 16,4 e 15,7 %, a fibra em detergente neutro (FDN) com valores de 65,3; 65,8 e 64,5% e fibra em detergente ácido (FDA) com 35,5; 37,8 e 39,6% para 100; 200 e 300 kg N/ha. O potássio aumentou significativamente a lignina das plantas. O melhor nível obtido foi 100 kg/ha de nitrogênio, sem potássio.

Structural characteristics and forage mass of Tifton 85 pastures managed under three post-grazing residual leaf areas

The experiment was carried out on Cynodon spp cv. Tifton 85 pastures grazed by sheep under rotational stocking, with the objective of evaluating the structural characteristics as well as the forage mass of the pastures subjected to three grazing intensities in successive cycles. Treatments were composed of three residual leaf area indices (rLAI; 2.4; 1.6 and 0.8), allocated in completely randomized blocks with seven replications, totaling 21 experimental units. Tiller population density, pasture height, leaf area index, forage morphological composition and pasture forage mass were evaluated. The rLAI modified the tiller population density, which increased linearly with decrease in the rLAI of the pastures. Dry masses of leaf blade, stem and dead material were inferior when the rLAI imposed were lower, which resulted in differentiated forage production among the treatments. Tifton 85 pastures grazed by sheep in rotational stocking under tropical conditions with different rLAI show a modified sward structure over successive grazing cycles, mainly by alteration in the height and LAI of the plants at pre-grazing and by light interception post-grazing, which change the tiller population density. The residual leaf area index of 1.6 is the most suitable for pasture management for being equivalent to the heights of entrance and exit of animals on and from paddocks of 33 and 19 cm, respectively, which avoid great accumulation of dead material and excessive stem elongation, in addition to ensuring tillering in the sward.

Massa de forragem, composição morfológica e química de capim-tanzânia sob diferentes dias de descanso e altura de resíduo pós-pastejo

The experiment was conducted at UNESP/FCAV, Jaboticabal, SP, with the objective of evaluating the influence of the rest period and height of the residue post-grazing on the dry matter mass, morphologic composition and on the chemical composition of the Tanzania-grass pre-grazing condition, under rotational grazing. The treatments consisted of the combination of two rest periods (25 and 35 days) and two residue height post-grazing (30 and 50 cm), as a complete randomized design in factorial arrangement 2 x 2, with three replications, with the grazing cycles considered as sub plots. The herbage mass of stem, leaves, dead material and the leaf: stem ratio were significantly influenced (P<0.05) by the grazing cycles. The percentage of CP in the leaf and stem and the NDF in the stem, leaf and whole plant were influenced positively (P<0.05) by the grazing cycles. It was observed that the short rest periods associated with the smallest residue height post-grazing presented the best results in terms of herbage mass and chemical characteristics of the herbage.

New Culture Medium to Xanthan Production by Xanthomonas campestris pv. campestris

Xanthan is a important biopolymer for commercial purpose and it is produced in two stages by Xanthomonas campestris. In the first one, the bacterium is cultivated in the complex medium enriched in nitrogen and the biomass produced is used as inoculum for the next stage in which the gum is produced in another medium. In this work a new medium for the first stage is proposed in place of currently used YM medium. Different formulated growth media were studied and the correspondent biomass produced was analysed as inoculum for the second stage. The inoculum and gum were produced by batch process in shaker at 27A degrees C in pH 6.0 and at 30A degrees C in pH 7.0, respectively. The gum was precipitated with ethanol (3:1 v/v). The dryed biomass and xathan gum produced were determined by drying in oven at 105 and 40A degrees C, respectively. The viscosity of the fermentation broth and 1% gum solution in water were determined in Brookfield viscometer. The formulated medium presented the increase in gum production (30%), broth (136%) and 1% gum solution viscosity (60%) compared to YM, besides the inferior cost. The results showed the importance of the quality of the inoculum from the first stage of the culture which influenced on the gum viscosity in the second stage.

Self-assembling of phenothiazine compounds investigated by small-angle X-ray scattering and electron paramagnetic resonance spectroscopy

Small-angle X-ray scattering (SAXS) and electron paramagnetic resonance (EPR) have been carried out to investigate the structure of the self-aggregates of two phenothiazine drugs, chlorpromazine (CPZ) and trifluoperazine (TFP), in aqueous solution. In the SAXS studies, drug solutions of 20 and 60 mM, at pH 4.0 and 7.0, were investigated and the best data fittings were achieved assuming several different particle form factors with a homogeneous electron density distribution in respect to the water environment. Because of the limitation of scattering intensity in the q range above 0.15 angstrom(-1), precise determination of the aggregate shape was not possible and all of the tested models for ellipsoids, cylinders, or parallelepipeds fitted the experimental data equally well. The SAXS data allows inferring, however, that CPZ molecules might self-assemble in a basis set of an orthorhombic cell, remaining as nanocrystallites in solution. Such nanocrystals are composed of a small number of unit cells (up to 10, in c-direction), with CPZ aggregation numbers of 60-80. EPR spectra of 5- and 16-doxyl stearic acids bound to the aggregates were analyzed through simulation, and the dynamic and magnetic parameters were obtained. The phenothiazine concentration in EPR experiments was in the range of 5-60 mM. Critical aggregation concentration of TFP is lower than that for CPZ, consistent with a higher hydrophobicity of TFP. At acidic pH 4.0 a significant residual motion of the nitroxide relative to the aggregate is observed, and the EPR spectra and corresponding parameters are similar to those reported for aqueous surfactant micelles. However, at pH 6.5 a significant motional restriction is observed, and the nitroxide rotational correlation times correlate very well with those estimated for the whole aggregated particle from SAXS data. This implies that the aggregate is densely packed at this pH and that the nitroxide is tightly bound to it producing a strongly immobilized EPR spectrum. Besides that, at pH 6.5 the differences in motional restriction observed between 5- and 16-DSA are small, which is different from that observed for aqueous surfactant micelles.

A theoretical study on cytosine tautomers in aqueous media by using continuum models

B3LYP/6-31 + + G** and MP2/6-31 + + G** calculations have been carried out to study six tautomers of the nucleic acid base cytosine in aqueous media. Solvent effects have been analyzed using the self-consistent reaction field theory with two continuum methods. Relative stabilities and optimized geometries have been calculated for the tautomers and compared with experimental data. The present results show the importance of electrostatic solvent effects in determining observable properties of the cytosine tautomers. The amino-oxo form (C1) is the most abundant tautomer in aqueous media while the other amino-oxo form (C4) is the most energetically favored when solvent effects are included. These results can be justified by the larger values of the dipole moments for both C1 and C4 tautomers. Theoretical and experimental results of the harmonic vibrational frequencies and rotational constants show good agreement. (C) 2000 Elsevier B.V. B.V. All rights reserved.

Spacecraft's attitude prediction: solar radiation torque and the Earth's shadow

A semi-analytical approach is proposed to study the rotational motion of an artificial satellite, under the influence of torque due to the solar radiation pressure, and taking into account the influence of Earth's shadow. Using Andoyer variables the equations for the rotational motion are presented in extended Hamiltonian form. In order to get a solution for the state variables close to an actual motion, the considered model for the shadow function takes into account physical and geometric factors and three specific regions: shadow, penumbra and full light. A mapping for the shadow function is proposed and a semi-analytical process is applied. When the satellite is totally illuminated or it is inside the penumbra, a known analytical solution is used to compute the satellite's attitude. A numerical simulation shows, when the penumbra region is included, the attenuation of the rotational motion during the transition from the shadow to the illuminate region and vice versa. (c) 2005 Published by Elsevier Ltd on behalf of COSPAR.

Analytical attitude prediction of spin stabilized spacecrafts perturbed by magnetic residual torque

An analytical approach for spin-stabilized spacecraft attitude prediction is presented for the influence of the residual magnetic torques. Assuming an inclined dipole model for the Earth's magnetic field, an analytical averaging method is applied to obtain the mean residual torque every orbital period. The orbit mean anomaly is utilized to compute the average components of residual torque in the spacecraft body frame reference system. The theory is developed for time variations in the orbital elements, and non-circular orbits, giving rise to many curvature integrals. It is observed that the residual magnetic torque does not have component along the spin axis. The inclusion of this torque on the rotational motion differential equations of a spin stabilized spacecraft yields conditions to derive an analytical solution. The solution shows that residual torque does not affect the spin velocity magnitude, contributing only for the precession and the drift of the spin axis of the spacecraft. (c) 2005 COSPAR. Published by Elsevier Ltd. All rights reserved.

Attitude propagation using non-singular canonical variables

Three sets of non-singular canonical variables for the rotational motion are analyzed. These sets are useful when the angle between z-axis of a coordinate system fixed in artificial satellite ( here defined by the directions of principal moments of inertia of the satellite) and the rotational angular momentum vector is zero or when the angle between Z-inertial axis and rotational angular momentum vector is zero. The goal of this paper is to compare all these sets and to determine the benefits of their uses. With this objective, the dynamical equations of each set were derived, when mean hamiltonian associate with the gravity gradient torque is included. For the torque-free rotational motion, analytical solutions are computed for symmetrical satellite for each set of variables. When the gravity gradient torque is included, an analytical solution is shown for one of the sets and a numerical solution is obtained for one of the other sets. By this analysis we can conclude that: the dynamical equation for the first set is simple but it has neither clear geometrical nor physical meaning; the other sets have geometrical and physical meaning but their dynamical equations are more complex.

Attitude stability of artificial satellites subject to gravity gradient torque

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A simple method for choosing the parameters of a two degree-of-freedom tuned vibration absorber

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento de misturas instantâneas de mandioca e caseína: efeito do teor de proteína e parâmetros de extrusão sobre a viscosidade

O interesse da indústria de alimentos por produtos desenvolvidos a partir de farinhas acrescidas de proteína não se deve somente às suas características nutricionais, senão também às suas propriedades funcionais e reológicas, as quais definem as suas aplicações comerciais. Este trabalho teve por objetivo avaliar o efeito de parâmetros operacionais do processo de extrusão sobre as propriedades de pasta de misturas de farinha de mandioca e caseína. O processo de extrusão seguiu o delineamento 'central composto rotacional' para três fatores: teor de proteína (2,5 a 9,5%), umidade (14,5 a 19,5%) e temperatura de extrusão (65 a 135 ºC). As misturas antes e após a extrusão foram analisadas no Rapid Visco Analyser (RVA) quanto a: viscosidade inicial, pico de viscosidade, quebra de viscosidade, viscosidade final e tendência à retrogradação. Os resultados obtidos nas misturas antes da extrusão mostraram aumento dos valores de viscosidade com o aumento da concentração de proteína até o ponto central (6%) e, nos teores mais elevados de proteína, ocorreu redução destes. Após a extrusão, observou-se que o teor de proteína foi a variável de maior efeito sobre as propriedades de pasta, seguida pela umidade das misturas.