A continuously differentiable upwinding scheme for the simulation of fluid flow problems

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Study of the dimensions of double-torsion test specimens

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alternative Model of Three-Phase Transmission Line Theory-Based Modal Decomposition

In this paper is shown the development of a transmission line, based on discrete circuit elements that provide responses directly in the time domain and phase. This model is valid for ideally transposed rows represent the phases of each of the small line segments are separated in their modes of propagation and the voltage and current are calculated at the modal field. However, the conversion phase-mode-phase is inserted in the state equations which describe the currents and voltages along the line of which there is no need to know the user of the model representation of the theory in the field lines modal.

Micro Welding of Ni-based Alloy Monel 400 Thin Foil by Pulsed Nd:YAG laser

In this study a pulsed Nd:YAG laser was used to join Monel 400 thin foil with 100 mu m thickness. Pulse energy was varied from 1.0 to 2.25J at small increments of 0.25J. The macro and microstructures were analyzed by optical microscopy, tensile shear test and microhardness. Sound laser welds without discontinuities were obtained with 1.5 J pulse energy. Results indicate that using a precise control of the pulse energy, and so a control of the bottom foil dilution rate, it is possible to weld Monel 400 thin foil. The process appeared to be very sensitive to the gap between couples.

Pulsed Nd:YAG laser welding of Ni-alloy Hastelloy C-276 foils

In this study a pulsed Nd:YAG laser was used to join Hastelloy C-276 thin foil with 100 microns thickness. Pulse energy was varied from 1.0 to 2.25 J at small increments of 0.25 J with a 4 ms pulse duration. The macro and microstructures of the welds were analyzed by optical and electronic microscopy, tensile shear test and microhardness. Sound laser welds without discontinuities were obtained with 1.5 J pulse energy. Results indicate that using a precise control of the pulse energy, and so a control of the dilution rate, it is possible to weld Hastelloy C-276 thin foil by pulsed Nd: YAG laser. (C) 2012 Published by Elsevier B. V. Selection and/or review under responsibility of Bayerisches Laserzentrum GmbH

Crescimento e desempenho de bertalha (Basella alba L.) em função do tipo de propagação

Malabar spinach is a non-conventional vegetable propagated mainly by seeds. This research evaluated the propagation by stem cuttings as an alternative method of propagation and verified its effect on growth of the vegetable. Plantlets propagated by seeds and stem cuttings were grown in greenhouse and their growth were evaluated in five successive intervals of 21 days each, with the first evaluation carried out 60 days after the transplanting. The results showed that the propagation methods have influence on the Malabar spinach growth. Plants propagated by seeds display slow, but vigorous growth, with larger relative yield of leaves and tender leaves, while plants propagated by cuttings showed fast initial growth, with rapid fruit formation. Thus, the propagation by cuttings is more suitable for seed production, while propagation by seeds is more profitable for leaves production.

Screen-Printed Carbon Electrode Modified with Poly-L-histidine Applied to Gold(III) Determination

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento de mudas de bromélia (Neoregelia cruenta (R. Graham) L. B. Smith) cultivadas em diferentes substartos e adubação foliar

As bromélias apresentam formas exóticas com uma grande diversidade de cores e de flores, constituindo importantes espécies para uso em paisagismo e floricultura. em conseqüência disto, são muito comercializadas. Porém, parte das plantas que se encontram no mercado, ainda são provenientes do extrativismo. Esta situação é também reflexo do pequeno número de informações sobre técnicas de propagação e cultivo. Uma das limitações é o desconhecimento do tipo de substrato e adubação adequados ao cultivo destas espécies. Assim, o objetivo deste trabalho foi avaliar o crescimento de bromélias do Neoregelia cruenta, cultivadas em diferentes substratos e adubações foliares através da altura, do número de folhas, da matéria fresca e seca, da parte aérea e das raízes. As mudas utilizadas foram provenientes de cultura de tecidos. Após um período de pré-aclimatização, foram transplantadas para estufa sem nebulização. Os substratos foram constituídos da mistura de diferentes proporções de solo, areia, casca de arroz carbonizada e por um substrato comercial à base de vermiculita. Aos substratos foi aplicada adubação foliar, combinando uréia e sacarose, em intervalos de quinze dias. Os resultados obtidos mostraram que as interações entre os substratos, dose de sacarose e de uréia, não afetaram a altura das mudas e o número de folhas. O uso de sacarose também não influenciou o desenvolvimento das mudas. O substrato comercial à base de vermiculita, independente da aplicação de adubação foliar, proporcionou maior altura das mudas e número de folhas. A aplicação de uréia apresentou efeito linear crescente durante o período avaliado.

Power flow in distribution networks with earth return

The problems of wave propagation and power flow in the distribution network composed of an overhead wire parallel to the surface of the ground have not been satisfactorily solved. While a complete solution of the actual problem is impossible, as it is explained in the famous Carson's paper (1926), the solution of the problem, where the actual earth is replaced by a plane homogenous semi-infinite solid, is of considerable interest. In this paper, a power flow algorithm in distribution networks with earth return, based on backward-forward technique, is discussed. In this novel use of the technique, the ground is explicitly represented. In addition, an iterative method for determining impedance for modelling ground effect in the extended power flow algorithm is suggested. Results obtained from single-wire and three-wire studies using IEEE test networks are presented and discussed. (C) 2003 Elsevier Ltd. All rights reserved.

Retention characteristics in Bi3.25La0.75Ti3O12 thin films prepared by the polymeric precursor method

Ferroelectric Bi3.25La0.75Ti3O12 (BLT) thin films were deposited on Pt/Ti/SiO2/Si substrates by the polymeric precursor method. The films present c-axis preferred orientation after annealing at 700 degrees C for 2 h in conventional furnace. All the capacitors showed good polarization fatigue characteristics at least up to 1x10(10) bipolar pulse cycles and excellent retention properties up to 1x10(4) s. We found that the polarization loss is insignificant with five write/read voltages at a waiting time of 10 000 S. Independently of the applied electric field the retained switchable polarization approached a nearly steady-state value after a retention time of 10 s. (C) 2005 American Institute of Physics.

Desenvolvimento in vitro de copo-de-leite: efeito das concentrações de sacarose e de ácido giberélico

Calla lily (Zantedeschia aethiopica) is appreciated as cut flower and for the composition of gardens. However, many pathogens affect this species. By the traditional method of propagation, some units of new seedlings can only be produced annually. Tissue culture allows fast large-scale clonal propagation and provides healthy uniform plants. During the in vitro process, type and concentration of growth regulator could affect the growth of seedlings. Thus, the aim of this work was to determine sucrose and GA(3) concentrations to increase the efficiency of the in vitro multiplication of calla lily. After 60 days, the length of the above ground part and the roots, the number of sprouts, roots and leaves, above ground part and root fresh weight of seedlings were evaluated. The experimental design was entirely randomized with four replications. It was necessary the addition of 60.5 g L-1 sucrose associated to 5 mg L-1 GA(3) to obtain hight sprouts number. For higher length of the above ground part the addition of 45.3 g L-1 sucrose and 10 mg L-1 GA(3) was enough. Better results in the root length and number of roots were observed only in the sucrose presence, in concentrations in the range of 51.13 - 56.5 g L-1.

Affine Toda systems coupled to matter fields

We investigate higher grading integrable generalizations of the affine Toda systems, where the flat connections defining the models take values in eigensubspaces of an integral gradation of an affine Kac-Moody algebra, with grades varying from l to -l (l > 1). The corresponding target space possesses nontrivial vacua and soliton configurations, which can be interpreted as particles of the theory, on the same footing as those associated to fundamental fields. The models can also be formulated by a hamiltonian reduction procedure from the so-called two-loop WZNW models. We construct the general solution and show the classes corresponding to the solitons. Some of the particles and solitons become massive when the conformal symmetry is spontaneously broken by a mechanism with an intriguing topological character and leading to a very simple mass formula. The massive fields associated to nonzero grade generators obey field equations of the Dirac type and may be regarded as matter fields. A special class of models is remarkable. These theories possess a U(1 ) Noether current, which, after a special gauge fixing of the conformal symmetry, is proportional to a topological current. This leads to the confinement of the matter field inside the solitons, which can be regarded as a one-dimensional bag model for QCD. These models are also relevant to the study of electron self-localization in (quasi-)one-dimensional electron-phonon systems.

Investigation into the use of the Laryngeal Mask Airway in pentobarbital anesthetized dogs

Objective - To investigate the use of the laryngeal mask airway (LMA) in dogs. Study Design - Prospective experimental study. Animals - Eight healthy adult mixed breed dogs weighing from 15 to 20 kg. Methods - The dogs were anesthetized with intravenous pentobarbital. An LMA was introduced after the induction of anesthesia and 1 L/min O2 plus 1 L/min air was delivered using a circle anesthetic system. Respiratory rate, tidal volume, arterial O2 saturation (pulse oximetry), end tidal CO2, inspired fraction of O2, pulse rate, and mean arterial blood pressure were measured after the insertion of the LMA and 30, 60, 90, and 120 minutes afterwards. Results - There were no changes in respiratory rate, tidal volume, arterial O2 saturation, and pulse rate during anesthesia. End tidal CO2 decreased significantly by the end of anesthesia and ventilation appeared satisfactory. Conclusions - An LMA appeared to be an alternative option to maintain the patency of the airway in dogs. Clinical Relevance - This device may allow safe maintenance of an airway in dogs when intubation is difficult or when it interferes with the procedure (eg, cervical myelography). ©Copyright 1999 by The American College of Veterinary Surgeons.

Evaluation of microsatellite markers in cultivars of sweet orange (Citrus sinensis [L.] Osbeck)

Sweet orange is considered a very important species in the citrus world market and presents wide morphological variability. However, its characterization at the molecular level by random amplified polymorphic DNA (RAPD) and isozyme markers is not appropriate. Microsatellite or simple sequence repeats (SSRs) have been suggested as ideal for studies in cultures of vegetative propagation and as value markers for mapping in several species. However, information on microsatellite polymorphism in citrus species is scarce. In this work, microsatellite markers (AG-repeats) were developed from an enrichment library of genomic DNA of sweet orange cv. Pera (Citrus sinensis [L.] Osbeck), and 31 cultivars of sweet orange were evaluated. Evaluation of 18 microsatellite primers did not permit differentiation of the varieties studied. New microsatellite primers are being evaluated with the aim of detecting polymorphisms among the cultivars and closely related species to be used in genetic mapping programs.

Evaluation of procera/porcelain interface in metal-free prosthesis

Prosthetic substructures for dental application are veneered by porcelain comprising a structure with different elastic modulus and thermal expansion coefficients layers. This structure may present residual stresses in different layers leading to crack propagation and delamination. Although veneering porcelain remains basically on same strength than standard feldspathic porcelains, new ceramic cores have been developed with higher mechanical properties overcoming metal substructures, improving esthetics and biocompatibility. The interface between the Procera dense sintered alumina core and the manufacturer recommended veneering porcelain (AllCeram-Degussa) were evaluated using SEM in coping shaped specimen simulating the standard dental preparation. There were neither crack presences at the interface nor porcelain delamination.