378 resultados para porção servida
Resumo:
The study area is located in the southern portion of Rio Itapicuru Greenstone Belt, Bahia, where were found rocks that belongs to the Canto Sequence, that comprises felsics and intermediary rocks, beyond metasediments. The studied maps and drill holes help to recognized stratigraphy column that was divided in three mains domains, from the base to the top: andesitics to felsics lavas domain, carbonaceous and metasedimentary domains. The data obtained in mapping and petrography analysis allows classify the area in three deformational phases, Dn, Dn+1, Dn+2. The metamorphism recognized according to the mineralogical associations permitted to classify a progressive regional metamorphism (lower to medium greenchist facies) till biotite zone, falling until chlorite zone due to retrometamorphism. The auriferous mineralizations are mainly related to hydrothermal veins included in the different lithologies, mainly in carbonaceous schists
Resumo:
This study aimed the geological characterization at scale 1:50.000 of an area belonging to the southern sector of the Brasilia Belt, located in the western portion of the Passos Nappe, near the town of Cássia, MG. In this region, outcrops rock types belonging to Araxá Group, composed of metasediments associated with metavolcanics which form a tectonometamorphic terrain of great importance for understanding the geological evolution of southeast and midwest regions of Brazil. With the development of work was possible to group the rocks in 10 lithostratigraphic units and had been identified 3 different zones of metamorphism generated during the peak metamorphism. The structural pattern of the area shows that the main foliation has average dip 30 ° NW and mineral lineation parallel to the stretching direction with 290 °. Still, we can conf irm that this inverse gradient metamorphic rocks of the Passos Nappe, described by several authors. Also, were seen lithotypes of economic interest, some already in exploitation, such as clay and sand, and other mineral commodities, which are occurring and can be used: quartz, quartzite, garnet, kyanite, rutile and zircon.
Resumo:
We conducted a study of the quality of water distributed by Artesian Well in relation to water supply served by the public for purposes of human consumption of UNESP Campus Guaratinguetá. Two sections of the network were randomly chosen and monitored for 105 days: the stretch of the pipeline started off the Water Treatment Station of the Autonomous Service of Water, Sewage and waste in the Municipality of Guaratinguetá and ended in a point consumption of the Child Family Center, while the section B began at the output of an artesian well and finished in a point of consumption of the Department of Civil Engineering. It is the deterioration of water quality in parts A and B, through comparative analysis of Bicarbonates, Total Hardness, Total Iron, free residual chlorine, pH, Total Residual, Turbidity, Conductivity, Color, Fecal Coliforms and Total Coliforms. Among the observations that can be highlighted: the Total Hardness was found in highest concentration in the extract; for Total Iron significant variations were obtained for both parts, and reduction of this parameter in two points of consumption analyzed, not the expected increase concentration, because the contact of water along the pipe, the CRL showed significant depletion to section A, which can be related to impurities in the water, the presence of biofilm on the walls of pipes, or because this is the stretch of greater extent to be covered by water for pH, this indicated that the water is alkaline and slightly acidic stretch in section B; Turbidity was found for the higher concentration to the passage, and a considerable reduction of this parameter at point consumption due to deposition of particulate matter along the stretch, the conductivity also showed a higher concentration in the extract, as well as an increase in this parameter at the point of consumption. Upon leaving ... (Complete abstract click electronic access below)
Resumo:
Given the importance of preserving the water quality of the Guarani Aquifer, the work done in the hydrographic basin of the rivers Jacaré-Guaçú e Jacaré-Pepira, located in the central-northern São Paulo state, was made to map the hydraulic conductivity from the use of some empirical methods associated with granulometric analysis and in situ testing, specifically with the Guelph permeameter. All results were submitted to a correlation analysis and subsequently mapped using the methodology of minimum curvature, based on numerical techniques Spline. These procedures provide for studies of aquifer vulnerability and assist in decision making in environmental projects and guidelines for urban planning
Caracterização estrutural do Lineamento de Piúma e sua influência na porção norte da Bacia de Campos
Resumo:
The detailed study of the Brazilian continental margin basins became possible with the advancement of geophysical tools, with emphasis on seismic reflection. Characterizing the structural and stratigraphic elements of Brazil’s marginal basins they realized that there was a relationship with structures present on the adjacent continental basement. So many works began to be made to understand this relationship and know the major factors that influenced the evolution of the continental margin. The study area of this work includes the northern portion of the Campos Basin and the continental outcropping adjacent areas, which corresponds to the northern of Rio de Janeiro state and the southern of Espirito Santo state. This area stands an important structural feature of NW-SE direction with a projection to the Campos Basin called Lineamento de Piúma. The outcropping basement rocks belongs to the Ribeira Belt which was bonded to other mobile bands forming the continent Western Gondwana during the Brasiliano Cycle, which later fragmented giving rise to the Atlantic Ocean. The opening of the ocean results on the formation of the marginal basins of Brazil. These basins have continental, transitional and marine facies. On Campos Basin the continental phase resulted on the formation of horsts and grabens bounded by synthetic and antithetic faults. Continuing rifting formed the saline lakes that deposited siliciclastic and carbonate sediments. The transitional phase resulted on thick packages consist of evaporites (halite and anhydrite) that was deposited in lagoon environment, tectonically quiet arid and semi-arid. The marine phase it deposited siliciclastic and carbonate in the Campos Basin resulting in shales, marls, limestones, ritmito, turbidites, sandstones and others. The objective of this study is to investigate the possible continuation... (Complete abstract click electronic access below)
Resumo:
The area where the study was conducted is located in the central-western state of Goias. It geologically inserts the northern portion of the Greenstone Belt of Faina which belongs to the Archean terranes that fits in Brasília Fold Belt and Tocantins Structural Province. This region is known for its greenstone lode gold potential and it was heavily exploited by pioneers and prospectors, leaving many records for where they have been through. Preliminary work done by Orinoco Brasil Mineração in their required areas at the region showed that the environment is promising for gold mineralization and that the ore is controlled by structures. Therefore the objectives of this work were the geological and structural mapping in semi detail scale to improve geological, stratigraphic and structural controls present attributing possible ore understanding. With the development of the work there were recognized on the desktop three structural domains separated by a thrust fault. For each domain were discriminated the geological units ranging in gneisses, quartzites formed from coarse sediments arcoseanos, and schists. By mapping structures there were found five deformation phases, Dn-2, Dn-1, the Dn event that generated the main foliation (Sn) in high representation and two post-stages Dn with brittle late manifestations. The detail mapping of the Rattlesnake Gallery showed that the mineralized quartz vein is consistent with axial-plane foliation Sn-2 belonging to the oldest deformation Dn-2 phase and that the high grade is distributed in the hinge region folds of the same phase
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The area of this work is located along the Northern portion of the Pelotas´s basin. The onshore region extends from the Southern portion São Paulo State to the North of Rio Grande do Sul State, with a total area of 440 530 km ². The objective of the research is to characterize the main geological structures of the outcropping basement in the Paraná Basin and its correlation with the offshore portion of the Pelotas Basin. The characterization was performed through the integration of surface (SRTM images and outcrops) and subsurface data (seismic data and well logs), the method includes the use of remote sensing techniques and seismic interpretation. The main structures to be analyzed are the Tibagi Lineament and the “Torres Syncline in order to verify its influence on the geological evolution and deformation of the basin. As result, it was identified the continuity of the both structures inside the offshore basin (Pelotas Basin); but only the Tibagi Lineament represents an important structural feature in the offshore basin. In this sense, the Tibagi lineament shows a NW-SE direction along the both basins (Pelotas and Paraná) and it is defined by drainages and relief on the continental portion. It was classified as a graben structure limited by normal faults and it also was verified a trend of faults inside the lineament that cuts all the sedimentary package of Itararé Group from Paraná Basin. The Torres syncline is a structure that connects the arches of Ponta Grossa and Rio Grande, showing NW-SE orientation and a low angle dip in the NW direction. Its projection into the Pelotas Basin was not recognized by the methods applied in this work, because a preliminary analyze indicates that its projection corresponds to a structural high inside the Pelotas Basin
Resumo:
This work covers the methodology Six Sigma with the application of the steps Define, Measure and Analyze a company of steel tubes, with the objective of identify special causes in the process that drives the creation of the pore defect in the solder. It is highlighted the fact that this work is the base of an continuous upgrade project that aims in eliminating the occurrence of this defect. The motivation is given to the necessity of improving the productivity of the factory, considering that the defect occurs at random and your causes are unknown. This way, it was defined that the problem to analyze, measured the capability of the process in DPMO and analyzed with the aid of graph by attribute P. The results show the process that present special cases, as well as the process considered ideal, This way it was stated that in this work, the processes destabilized and the controlled, allowing a comparison of the characteristics for the elaboration of concise action plans to eliminate the defect. The project must follow the steps Upgrade and control the methodology Six Sigma, in order to ensure success in his execution, aiming to amplify the competitive edge of the business
Resumo:
Main occurrence of Cu-Au in Goias Magmatic Arc, the Chapada mine fits into the geological context of the Brasilia Fold Belt, specifically in the Mara Rosa Magmatic Arc. Four targets, named Hidrotermalito Norte and Sul, NW Chapada Mine Portion and Suruca, are situated in this context, which includes ortogneisses and rocks from the Mara Rosa volcanic-sedimentary sequence. All these targets have been studied due to the possibility of presenting a great potential in Cu-Au, as well as the Chapada mine. Hidrotermalitos Norte and Sul targets presents four lithological sequences, which were identified as: quartz-muscovite schist; muscovite quartzites and kyanite quartzites; quartz-biotite-amphibole schist with pyrite and epidote-amphibole-biotite gneisses with muscovite; muscovite-biotite gneisses. They are metamorphosed to amphibolites facies and retrogressive greenschist facies. Sulfetation represented mainly by pyrite. In the NW Chapada Mine Portion, three main lithological groups were identified and classified as biotite gneisses; honblende-quartz-biotite-schist; amphibolites, with the first group metamorphosed in greenschist facies (low grade), and the other two groups metamorphosed in amphibolites facies, with subsequent retrogressive metamorphism in greenschist facies. Sulfetation is represented by chalcopyrite and pyrite. Finally, also three main lithological groups were identified in the Suruca target, classified as garnet-chlorite-epidote-eiotite gneiss; biotite gneiss and chlorite-biotite gneiss with epidote and muscovite; muscovite-quartz schist, all them metamorphised in amphibolites, with retrometamorphism in greenschist facies. Sulfetation represented by pyrite and sphalerite
Resumo:
The Santos Basin is located in the Brazilian continental margin and includes the coast of Santa Catarina, Paraná, São Paulo and Rio de Janeiro states. Its northern limit is the Campos Basin through the High of Cabo Frio and the southern one with the Pelotas Basin through the Platform of Florianópolis, totaling an area of approximately 350,000 square kilometers in a water depth of 3,000 m. The Paranapanema Lineament has WNW / ESE direction, and extends from the area filled by the Paraná Basin, on the border between the states of Sao Paulo and Parana, lasting up to near the ocean floor along with the fracture zone of Rio de Janeiro. The Capricorn Lineament is a feature inherited from the separation between the continents of Africa and South America, and is the main structural feature NW / SE of the Santos Basin center-south region. These two structures together with other ones with continental origin may be associated with structural features in the sediments from the Santos Basin. This work aims to characterize the structures operating in the central portion of the Santos Basin based on subsurface data in the offshore area (2D seismic) together with data from the surface of the continental basement in a way to correlate the Santos Basin structures with the continental regional traits. This data interpolation showed that the structural features of the continent operates on the submerged zone, the seismic sections show these structural trends for the Paranapanema Lineament / Fracture Zone of Rio de Janeiro, Capricorn Lineament and two fault zones that exhibit structures typical of a transfer zone
Resumo:
The study area is located in the geological context of the northern portion of the Rio Itapicuru Greenstone Belt (GBRI), located northeast of the São Francisco Craton, Bahia State. The GBRI is known for its great economic potential for gold mineralization, looking south at Fazenda Brasileiro Mine and North Mine Maria Preta, is situated in the study área. The structural pattern of the northern portion of the Greenstone, theme of this work, is of great importance to understand the mineralization present. To characterize the structural model three geologic sections (scale 1:25000) were made with NW-SE and EW directions and detailing two mineralized targets, Encantado, located northwest of the area, near the city of Nordestina, and C1W, located near Itapicuru River, west of the Maria Preta mine. Thus, field work and petrographic analysis were conducted, that allow to indicate the existence of two structural domains characterized by the existence of a main foliation, low angle dipping main foliation and another with high dip angle, both with NW, moreover, folds occur in the area Dn-1 and post-Dn folds. Dn-1 folds are observed less frequently but they occur mainly forming an oblique foliation and the Sn is present in porphyroblasts observed in petrographic analysis, whereas in relation to the folds post Dn, there are more than one type of folding in area, which differ by the orientation of their axis, a post Dn NS and EW Dn another post. Moreover, two areas of metamorphic green schist (biotite zone) and medium amphibolite, which are directly related to the structural domains found
Resumo:
The Mesozoic acid volcanism of the Paraná-Etendeka Province can be considered as one of the biggest events of its kind in the Earth's surface, and its study have attracted special interest in characterizing the end of magmatism that preceded the rupture process and the formation of continental Africa and South America Although significant, the acid volcanism featuring Members Chapecó Palmas and Serra Geral Formation represents only 2.5% of the total generated by the magmatic rocks and perhaps therefore the existing literature on these rocks is well less significant than that on the basalts. However, there are still aspects still unclear about the origin and evolution of these rocks in relation to the associated basalts. Thus, two profiles were selected, called RA and TA, which be a systematic collection of samples from the base where the Botucatu Formation sandstones occur at the top, where they observe Palmas acid rock type. These samples should be analyzed for major, minor and trace elements and treated in specific diagrams to define the vertical variation lithochemistry and their possible relationships with the associated basalts
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
The author has verified the average depth of the mandibular fossa, in the X-ray image, using the oblique lateral transcranial technique from the right and left sides samples of each patient, which included a total of 176 patients, 87 male and 89 female. The patients were in following phases: deciduous dentítion (the patients had only deciduous teeth in the oral cavity or, if they had any permanent teeth, they could not be in occlusion), mixed dentition (the patients presented deciduous and permanent in the oral cavity) and permanent dentition (the patients had only permanent teeth in the oral cavity), until the eruption of the permanent third molars, in the region from São José dos Campos. São Paulo. Brazil. The patients were under treatment at the Dental School. UNESP (São Paulo State University). ln order to measure the depth of the mandibular fossa in millimeters an imaginary line was traced on the X-ray image, perpendicular to the other line that served as a reference, which was traced from the botton part of the articular eminence up to the tympanosquamous fissure. After the data were obtained and put in a data sheet, they underwent statistical analysis. The results showed that, in the average, the depth of the mandibular fossa in masculine sex is non-statistically signíficant larger than what was observed in feminíne sex, and the right side is larger than the left side, with significant statistical differences. However, only in permanent dentition, in masculine sex, the depth of the mandibular fossa on the right side is larger than on the left side with significant statistical differences