Excision of an atypical case of palatal bone exostosis: a case report.

Bone exostosis has long been described in the literature, appearing in most cases as a torus palatinus or mandibularis. These two variations are relatively common and affect approximately 30% of the world's population. Incidence is even higher when human skulls are examined post mortem, indicating that in some cases the exostosis is small and cannot be seen under the soft tissue. Removal of an exostosis is usually associated with the construction of a prothesis, but in rare cases such as the present, the lesion enlarges enough to affect speech and feeding. Few studies have reported the removal of such a large exostosis, and all were conducted in a hospital environment. In this case, complete removal was successfully conducted in an ambulatory clinic under local anesthesia.

Immunohistochemical expression of PCNA, p53, bax and bcl-2 in oral lichen planus and epithelial dysplasia.

The potential for malignant transformation of oral lichen planus is still controversial. The expression of proteins related to cell proliferation and apoptosis in oral lichen planus and epithelial dysplasia was analyzed to evaluate the true potential for malignant transformation of this disease. Twenty-four cases of each lesion were subjected to the streptoavidin-biotin technique for identifying the immunohistochemical expression of PCNA, p53, bax, and bcl-2 proteins. Of the 24 cases of oral lichen planus, 14 (58.33%) were positive for PCNA, 10 (41.67%) for p53, 4 (16.67%) for bcl-2 and 12 (50%) for bax, whereas of the 24 cases of epithelial dysplasia, 20 (83.33%) were positive for PCNA, 10 (41.67%) for p53, 6 (25%) for bcl-2, and 20 (83.33%) for bax. Chi-squared test showed no statistically significant differences between the expression of p53 and bcl-2 in oral lichen planus and epithelial dysplasia, regardless of the grade (P > 0.05). However, the expression of PCNA and bax was significantly increased in epithelial dysplasia (P < 0.05). The results of this study showed that alterations in expression of these proteins are observed in oral lichen planus and epithelial dysplasia, suggesting the potential for malignant transformation in both lesions.

Osteologia craniana de Nyctibiidae (Aves, Caprimulgiformes)

The Potoos form an exclusively neotropical family of nocturnal birds distributed throughout Central and South America, except Chile, and reaching their highest diversity in the Amazon region. The seven currently recognized species are certainly among the most poorly known birds of this region. They are characterized by a distinctive mimicry of vegetal trunks, where they remain almost motionless during daytime. For this reason, their nocturnal and cryptic habits make them exceedingly difficult to study. Published accounts on behavior and natural history of the family are scarce and contributions regarding its anatomy are rare. Here we sample six of the seven currently recognized species of Nyctibiidae, including Nyctibius grandis, N. aethereus, N. griseus, N. jamaicensis, N. leucopterus and N. bracteatus, in order to conduct a detailed and illustrated description of the skull and jaw osteology. High interspecific variation in skull osteology was observed in the family. Species of this family possess a highly modified skull, adapted to their life habits, which shelters their well developed eyes and permits a large mouth opening. The bones that form the palate structure exhibit a dorsoventral flattening, particularly in the pterigoid and parasphenoid bones, with the palatine bone being a broadly developed, wing-shaped structure. In the maxilar region, near the jugal arch, there is a tooth-like projection, unique among birds, which may assist in the retention of prey upon capture. The vomer bone is highly variable within the family, showing varying numbers of rostral projections amongst species. The broad occipital region exhibits large spacing between the quadrate bones, which are vertically disposed and possess a reduced processus orbitalis. The mandible, which is flexible and elastic, has an extremely short symphyseal region and sindesmotic joints in both mandibular rami. As a family, potoos possess a highly specialized skull which provides insight into the relationship between the form of the structures and the feeding habits of the species. Furthermore, the large interspecific variation in skull morphology emphasizes the needs for taxonomic revision within the family, which at present is lumped into a single genus.

Influence of the construction bite vertical and horizontal dimensions on dentoskeletal structures induced by the Klammt appliance in Class II treatment

Aim: To evaluate the influence of construction bite in the dentoskeletal changes induced by Klammt Appliance. Methods: The sample consisted of 17 children, with Class II malocclusion and initial mean age of 8.5 years. The construction bite was obtained using an Exactobite on edge-toedge anteroposterior relationship with 3 mm interincisal clearance. The height of the acrylic was determined by initial overbite associated to interincisal clearance and measured with digital caliper. The amount of advancement was obtained and measured by initial overjet in the lateral radiography. Pearson's correlation, linear regression and ANOVA were used to determine the relationship between dentoskeletal and construction bite variables. Results: The increase in the height of the acrylic promotes a greater inhibition of the forward displacement of the nasal spine and reduction in the facial growth index. The increase in the mandibular advancement induces more downward displacement of nasal spine and pogonion; a counter-clockwise rotation of palatine plane; an increase in mandibular length, maxillary alveolar height and interincisal angle; a decrease in mandibular alveolar height, the intermaxillary discrepancy and overjet; and palatal tipping of upper incisors. Conclusions: The different dimensions of the construction bite influence the dentoskeletal changes induced by the appliance in Class II treatment.

Osteologia craniana de Micrastur semitorquatus Vieillot, 1817 (Falconiformes: Falconidae)

Micrastur semitorquatus, popularly known as Collared Forest-Falcon is an inhabitant of the rainforests of the Neotropical Region. Studies on the cranial osteology are scarce in the literature. To increase the knowledge about the anatomy of this species its cranial osteology was described and compared with other species of birds of prey. Three specimens of M. semitorquatus were examined at the Bird Division of the osteological collection at the Smithsonian National Museum of Natural History (USNM), Washington, DC (USNM: 245788, USNM 013493 and USNM 289773). Although the relationship between the form of a structure and its function is not fully established, many of the adaptations of the skull of M. semitorquatus may be related to this lifestyle and behavior, such as narrowing of the interorbital width, the robustness of pila supranasalis coupled with the prokinesis of the skull, a process developed post-orbital, and palatine expansion. In addition, the cranial osteology of M. semitorquatus can provide useful characters for cladistic analysis, sustaining the hypothesis of phylogenetic relationships with other species of the same genus or the same family.

Influence of microthreads and platform switching on stress distribution in bone using angled abutments

Purpose: To evaluate the stress distribution in peri-implant bone by simulating the effect of an implant with microthreads and platform switching on angled abutments through tridimensional finite element analysis. The postulated hypothesis was that the presence of microthreads and platform switching would reduce the stress concentration in the cortical bone. Methods: Four mathematical models of a central incisor supported by an implant (5.0mm×13mm) were created in which the type of thread surface in the neck portion (microthreaded or smooth) and the diameter of the angled abutment connection (5.0 and 4.1mm) were varied. These models included the RM (regular platform and microthreads), the RS (regular platform and smooth neck surface), the SM (platform switching and microthreads), and the SS (platform switching and smooth neck). The analysis was performed using ANSYS Workbench 10.0 (Swanson Analysis System). An oblique load (100N) was applied to the palatine surface of the central incisor. The bone/implant interface was considered to be perfectly integrated. Values for the maximum (σmax) and minimum (σmin) principal stress, the equivalent von Mises stress (σvM), and the maximum principal elastic strain (e{open}max) for cortical and trabecular bone were obtained. Results: For the cortical bone, the highest σmax (MPa) were observed for the RM (55.1), the RS (51.0), the SM (49.5), and the SS (44.8) models. The highest σvM (MPa) were found for the RM (45.4), the SM (42.1), the RS (38.7), and the SS models (37). The highest values for σmin were found for the RM, SM, RS and SS models. For the trabecular bone, the highest σmax values (MPa) were observed in the RS model (6.55), followed by the RM (6.37), SS (5.6), and SM (5.2) models. Conclusion: The hypothesis that the presence of microthreads and a switching platform would reduce the stress concentration in the cortical bone was partially rejected, mainly because the microthreads increased the stress concentration in cortical bone. Only platform switching reduced the stress in cortical bone. © 2012 Japan Prosthodontic Society.

The Lamination of Infinitely Renormalizable Dissipative Gap Maps: Analyticity, Holonomies and Conjugacies

Motivated by return maps near saddles for three-dimensional flows and also by return maps in the torus associated to Cherry flows, we study gap maps with derivative positive and smaller than one outside the discontinuity point. We prove that the lamination of infinitely renormalizable maps (or else maps with irrational rotation numbers) has analytic leaves in a natural subset of a Banach space of analytic maps of this kind. With maps having Hölder continuous derivative and derivative bounded away from zero, we also prove Hölder continuity of holonomies of the lamination and also of conjugacies between maps having the same combinatorics. © 2011 Springer Basel AG.

Cranial osteology of Picini (Aves: Piciformes: Picidae)

The Picini is composed of 26 species of woodpeckers from the old world that are grouped into seven genera. Given the absence of detailed studies on the cranial osteology of the Picini, the purpose of this study is to describe the cranial osteology of 14 species of Picini from six genera and to compare these species with each other, with other species of woodpeckers and with other bird groups. The results of the analysis of the bone structures of the skull of the Picini indicate that there are seven outstanding characteristic of bones involved in the functional mechanistics of the jaw apparatus. In the ossa cranii, these include the frontal overhang, the postorbital process, the extension of the parietal versus the frontal region and the temporal fossa. In the ossa faciei, these include the rostral expansion of the pterygoid, the ventral palatine fossa and the orbital process of the quadrate bone. For all of the structures associated with the cranial osteology of the investigated species, there is a clear distinction between the species of the genus Picus and the other species studied. Blythipicus rubiginosus, Chrysocolaptes lucidus, Reinwardtipicus validus, Gecinulus viridis and the species of the genus Dinopium exhibit additional particularities. © 2012 The Royal Swedish Academy of Sciences.

The Evidence of the Rugoscopy Effectiveness as a Human Identification Method in Patients Submitted to Rapid Palatal Expansion

The objective of this study was to demonstrate the effectiveness of rugoscopy as a human identification method, even when the patient is submitted to rapid palatal expansion, which in theory would introduce doubt. With this intent, the Rugoscopic Identity was obtained for each subject using the classification formula proposed by Santos based on the intra-oral casts made before and after treatment from patients who were subjected to palatal expansion. The casts were labeled with the patients' initials and randomly arranged for studying. The palatine rugae kept the same patterns in every case studied. The technical error of the intra-evaluator measurement provided a confidence interval of 95%, making rugoscopy a reliable identification method for patients who were submitted to rapid palatal expansion, because even in the presence of intra-oral changes owing to the use of palatal expanders, the palatine rugae retained the biological and technical requirements for the human identification process. © 2012 American Academy of Forensic Sciences.

Tonsilar metastases of melanoma in an older person

We presented a rare case of metastasis of melanoma in palatine tonsils alerting healthcare professionals to this diagnose in black oral lesions. © The Author 2013. Published by Oxford University Press on behalf of the British Geriatrics Society. All rights reserved.

Management of pure medial orbital wall fracture with autogenous bone graft

The orbit is an irregular conical cavity formed from 7 bones including the frontal, sphenoid, zygomatic, maxillary, ethmoid, lacrimal, and palatine bones. Fractures of the internal orbit can cause a number of problems, including diplopia, ocular muscle entrapment, and enophthalmos. Although muscle entrapment is relatively rare, diplopia and enophthalmos are relatively common sequelae of internal orbital fractures. Medial orbital wall fracture is relatively uncommon and represents a challenge for its anatomical reconstruction. In this context, autogenous bone graft has been the criterion standard to provide framework for facial skeleton and orbital walls. Therefore, it is possible to harvest grafts of varying size and contour, and the operation is performed through the bicoronal incision, which is the usual approach to major orbital reconstruction. Thus, this article aimed to describe a patient with a pure medial orbital wall fracture, and it was causing diplopia and enophthalmos. The orbital fracture was treated using autogenous bone graft from calvarial bone. The authors show a follow-up of 12 months, with facial symmetry and without diplopia and enophthalmos. In addition, a computed tomography scan shows excellent bone healing at the anterior and posterior parts of the medial orbital wall reconstruction. Copyright © 2013 by Mutaz B. Habal, MD.

Avaliação do crescimento e desenvolvimento craniofacial em crianças pré e pós adenotonsilectomia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Um novo Characidae (Ostariophysi: Characiformes) e suas relações dentro do clado A (Malabarba & Weitzman, 2003)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Controle de dinâmica caótica com toros robustos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Geometria e topologia das superfícies através de recorte e colagem

Pós-graduação em Matemática Universitária - IGCE