Influence of low and high levels of grain defects on maize wet milling

Yields and starch pasting characteristics obtained from wet milling of maize samples with low and high levels of defect grains were compared to those from sound samples. Defect grain groups ere established taking into account the defect degree. Thus the first group consisted of fermented, molded, heated and sprouted grains and the second of insect damaged. hollow, fermented (up to 1/4) grains and those injured by other causes. The grain groups, if present at low levels in the samples, 10% for first group and 17% for second group did not affect the chemical composition of starch and its pasting properties. obtained by the rapid visco analyser. Samples with high levels of grain groups (up to 100%). affected wet milling yields and starch viscosity. Samples with 100% of grains in the first group decreased starch, germ yield and peak viscosity and increased gluten yield. Samples with 100% of grains in the second group decreased germ and fiber yield but increased starch yield. (C) 2002 Elsevier B.V. Ltd. All rights reserved.

Texture and Microstructure of Gelatin/Corn Starch-Based Gummy Confections

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Heat exchangers for cardioplegia systems: In vitro study of four different concepts

The aim of this work is the evaluation of four different heat exchangers used for myocardium during cardioplegic system in cardiac surgeries. Four types of shell and tube heat exchangers made of different exchange elements were constructed, as follows: stainless steel tubes, aluminium tubes, polypropylene hollow fiber, and bellows type. The evaluation was performed by in vitro tests of parameters such as heat transfer, pressure drop, and hemolysis tendency. The result has shown that all four systems tested were able to achieve the heat performance, and to offer low resistance to flow, and safety, as well as have low tendency to hemolysis. However, we can emphasize that the bellows type heat exchanger has a significant difference with regard to the other three types.

Morphology and topography analysis of mesoporous titania templated by micrometric latex sphere arrays

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Metacercárias de Diplostomum (Austrodiplostomum) compactum Lutz, 1928 (Digenea, Diplostomidae) em peixes do rio Paraná, Brasil. Prevalência, sazonalidade e intensidade de infecção

This paper aims at evaluating the occurrence of Diplostommn (Anstrodiplostomum compactum (Digenea: Diplostomatidae) in the eyeball of Plagioscion sqnamosissimus (corvina) and Cichla ocellaris (tucunaré), monthly captured in Paraná river, Presidente Epitácio, state of São Paulo, Brazil. From 61 corvinas under analysis, 56 of them contained parasites (92%) with intensity rate of 42.0 host parasites. From an amount of 81 tucunarés, 45 contained parasites (55%) with intensity rate of 9.3 parasites. Corvinas showed prevalence from 71 to 100% with the highest intensity rates (103.3 and 106.9) from February to March, 2001. Comparatively, the tucunaré showed the highest prevalence from November 2000 (90%) to February 2001 (80%). The tucunaré highest intensity rates occurred on September, 2000 (12.7), December, 2000 (12.2) and February, 2001 (16.1). Metacercariae showed a hollow womb body and a posterior region of a sinuous conic protuberance, an oral sucker smaller than the acetabulae, a simple acetabulae located in the pre-equatorial region of helminto. A short pre-pharynx followed by a muscular pharynx, genital pore next to acetubulae. Corvina metacercariae presents 1.434,0 μm (880 to 1.840) long by 611.2 ± 93.4 μm (400 to 792) wide. Tucunaré metacercariae, 1.462.4 μm (960 to 2.480) by 710.8 μm (560 to 960). Authors confirmed corvina great susceptibility to Diplomastum and the relationship between the parasitism and the aquatic and climatic parameters.

Floral anatomy of Paepalanthoideae (Eriocaulaceae, Poales) and their nectariferous structures

• Background and Aims: Eriocaulaceae (Poales) is currently divided in two subfamilies: Eriocauloideae, which comprises two genera and Paepalanthoideae, with nine genera. The floral anatomy of Actinocephalus polyanthus, Leiothrix fluitans, Paepalanthus chlorocephalus, P. flaccidus and Rondonanthus roraimae was studied here. The flowers of these species of Paepalanthoideae are unisexual, and form capitulum-type inflorescences. Staminate and pistillate flowers are randomly distributed in the capitulum and develop centripetally. This work aims to establish a floral nomenclature for the Eriocaulaceae to provide more information about the taxonomy and phylogeny of the family. • Methods: Light microscopy, scanning electron microscopy and chemical tests were used to investigate the floral structures. • Key Results: Staminate and pistillate flowers are trimerous (except in P. flaccidus, which presents dimerous flowers), and the perianth of all species is differentiated into sepals and petals. Staminate flowers present an androecium with scale-like staminodes (not in R. roraimae) and fertile stamens, and nectariferous pistillodes. Pistillate flowers present scale-like staminodes (except for R. roraimae, which presents elongated and vascularized staminodes), and a gynoecium with a hollow style, ramified in stigmatic and nectariferous portions. • Conclusions: The scale-like staminodes present in the species of Paepalanthoideae indicate a probable reduction of the outer whorl of stamens present in species of Eriocauloideae. Among the Paepalanthoideae genera, Rondonanthus, which is probably basal, shows vascularized staminodes in their pistillate flowers. The occurrence of nectariferous pistillodes in staminate flowers and that of nectariferous portions of the style in pistillate flowers of Paepalanthoideae are emphasized as nectariferous structures in Eriocaulaceae. © The Author 2006. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved.

Cobertura da cultura da soja pela calda fungicida em função, de pontas de pulverização e volumes de aplicação

The goal of this research was to evaluate two tips of spraying nozzles (hollow cone nozzle and two flat fan nozzle annexed to a nozzle body DUO) and three spray volumes (100, 150 and 200 dm3 ha-1), whose application was for the control of the Asian soybean rust. An area of 288 m 2 was used, with a randomized blocks design in a factorial 2×3 with 4 repetitions, total of 24 experimental parcels of 12 m2. For the spraying with hydraulical nozzles a costal spray of constant pressure kept by C02 compressed with bar of 2 m was used. The analysis of the covering percentage was carried through by means of the use of hidro-sensible paper, that was placed in three position of the plant what it represents, in height, the third superior, average and inferior of the canopy. For both the third no interaction between the evaluated factors, was found and meither difference statistics between the spraying tips and the volumes. In absolute values the twin flat fan nozzle DUO presented minimum difference of covering in relation to the hollow cone nozzle, and for the spray volume of 200 dm3 ha -1 presented greater covering percentage.

Air-assistance in spray booms which have different spray volumes and nozzle types for chemically controlling spodoptera frugiperda on corn

The study aimed to evaluate the performance of air assistance in spray booms using different types of nozzles and spray volumes. We took into account spray deposits, fall armyworm control and crop corn performance in a narrow row cropping system. The experiment was carried out at the experimental area of Sao Paulo State University, Botucatu/SP, Brazil, during the 2008/2009 agricultural season, in randomized blocks with a factorial scheme (2×2+1) and four replications. Two spray nozzles (flat fan nozzle and hollow cone nozzle) were tested, combined with two air assistance levels in the spray boom (with and without air assistance) and a treatment control. In the experimental spraying, Spinosad insecticide was sprayed in amounts of 48 g active substance (a.s.)/ha. The air assistance in the spray boom increased the spray deposits in the V 4 growth stage of the corn plants. Moreover, the application of this technology showed higher efficiency on fall armyworm control, reaching a 100% level 15 days after spraying, in the V 10 growth stage of the plants. The hollow cone nozzle increased the spray deposit level on the corn plants compared with the flat fan nozzle, at growth stage V 4. However, the flat fan nozzle, combined with air assistance technology, was more effective for controlling fall armyworm in the same growth stage (V 4), although the hollow cone nozzle increased the deposit levels on the plants. All the technologies tested in the study promoted a reduction of plant damage from fall armyworm attack. Corn productivity is directly related to the control efficiency of fall armyworm.

Estudo da mcrobiota fúngica gastrintestinal de morcegos (Mammalia, Chiroptera) da região noroeste do estado de São Paulo: Potencial zoonótico

Bats are hosts of a rich diversity of microorganisms. Many studies indicate a close link between bats and fungi with pathogenic potential, especially for living in environments such as caves, caverns and hollow trees, favorable to the maintenance and spread of fungi. The objective was to study the gastrointestinal mycoflora of bats. Of the 98 samples belonging to 11 species of bats coming from 15 studied cities, 20% of the species were Carollia perspicillata, 19% Artibeus lituratus, 17% Molossus rufus, 13% Glossophaga soricina, 9% Nyctinomops macrotis, 8% Molossus molossus, 7% Desmodus rotundus, 2% Lasiurus ega and 1% Eptesicus furinalis, Myotis nigricans and Tadarida brasiliensis. The genus Aspergillus sp. was isolated from 29% of the samples, followed by 6% Microsporum sp. and Penicillium sp. 4% Trichophyton sp. and zygomycetes and 2% Fusarium sp. Of yeast species, 14% were from Rhodotorula sp., 10% Candida sp. and 2% Cryptococcus sp., 22% of isolates remained unidentified. All 82 cultures of organs were negative for Histoplasma capsulatum. There was a statistically significant association between the results of microbiological culture and bat species (p < 0.05). We conclude that the bats can act as disperser agents of fungi with pathogenic potential, although other studies should be performed to establish strategies to identify the main factors correlated with the growth and spread of microorganisms in nature and implication of bats in the epidemiological cycle.

Morphology and initial growth in the germination of dictyosperma album (bory) h. wendl. & drude ex scheffer (Arecaceae) seeds

Dictyosperma album, commonly known as Princess Palm, due to its graceful appearance and its ability to withstand strong hurricane force winds is largely used in landscaping areas. The aim of this work was to describe the diaspores (seeds with the stuck endocarp) morphology and the stages of the D. album germination process. Therefore we concluded that the species germination is of the tubular remote type and begins with the opening of a circular operculum in the fruit endocarp, through which emerges a bulbous and hollow structure, named cotyledonal petiole or embryophore. With the embryo growth, the endosperm is being gradually consumed. The embryo grows approximately up to 10 cm, when the dilation begins in its extremity. Starting from this extensive area, it begins the growth of the primary root and the opening of a longitudinal rift, through which emerges the aerial part that is composed by two sheaths that cover the first juvenile leaf. In this phase, the emergence of secondary roots is observed. The first leaves are simple and lance-shaped.

The resistivity piezocone for high resolution geo-environmental site investigation: A Brazilian example

A suit able decision-making on managing a contaminated site characterization program is strongly dependent of the diagnosis process. A detailed diagnosis can be done based on a Conceptual Site Model (CSM) elaboration using high resolution site characterization tools. The piezocone (CPTu) test is a high resolution tool which allows attaching several specific sensors, like the resistivity probe. This hybrid device is called the resistivity piezocone (RCPTu). A simulated geo-environmental site characterization program was performed on an erosion site using different tools (direct push tools soil samplers, hollow stem auger (HSA) drilling and RCPTu tests) to develop the CSM for a site similar to the Brazilian conditions. It was observed a good agreement between the site profiles interpreted by the different methods. The resistivity sensor attached to the piezocone improved the interpretation and the decision-making process on site was significantly better for the CSM elaboration. The RCPTu test data also allowed identifying the hydrogeological heterogeneities. The present study shows that the RCPTu test is also a useful and powerful tool to development an accurate CSM in a Brazilian condition, especially in an approach that prioritizes high resolution geo-environmental investigation. © 2013 Taylor & Francis Group.

Procedimento numérico para análise de vigas de alvenaria estrutural submetidas à flexão simples

Pós-graduação em Engenharia Civil - FEIS

Investigação geoambiental com tomada de decisão em campo utilizando o piezocone de resistividade como ferramenta de alta resolução: Marcos Tanaka Riyis. -

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da microbiota fúngica gastritestinal de morcegos (Mammala, Chiroptera) da região noroeste do estado de São Paulo: potencial zoonótico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise morfoestratigráfica da Bacia do Ribeirão dos Poncianos - MG

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)