Vertical Bone Augmentation Using a Polytetrafluoroethylene Nonporous Barrier for Osseointegrated Implants Partially Inserted in Tibiae of Rabbits

Purpose: The aim of this study was to evaluate the possibility of obtaining guided bone regeneration using a poly-tetrafluoroethylene (PTFE) nonporous barrier for 2 endosseous implants, partially inserted in tibiae of rabbits.Materials and Methods: Histologic characteristics of the interface between titanium implants (one group with titanium plasma-coated implants and the other group with acid-treated surfaces) and of the regenerated bone were also studied. Twenty screw-vent implants were placed in tibiae of 5 male New Zealand rabbits, 2 at the right side and 2 at the left side, protruding 3 mm from the bone level, to create a horizontal bone defect. At the experimental group the implants were with a PTFE nonporous barrier, whereas no barriers were used in contralateral implants. Animals were sacrificed 3 months after surgery and biopsy specimens were evaluated histologically and histomorphometrically under light microscopy. Student's t test was used for statistical analysis.Results: The histologic measurements showed a mean gain in bone height of 2.15 and 2.42 mm for the barrier group and 1.95 and 0.43 mm for the control group, for the titanium plasma-spray and acid-treated implant surfaces, respectively.Conclusion: The results of the investigation revealed that the placement of implants protruding 3 nun from crestal bone defects may result in vertical bone augmentation using a nonporous PTFE barrier. (Implant Dent 2009;18:182-191)

BOND STRENGTH DURABILITY of SELF-ETCHING ADHESIVES and RESIN CEMENTS TO DENTIN

Objectives: To evaluate the microtensile bond strength (mu TBS) of one-(Xeno III, Dentsply) and two-step (Tyrian-One Step Plus, Bisco) self-etching adhesive systems bonded to dentin and cemented to chemically cured (C&B Metabond) or light-cured paste of a dual-cure resin cement (Variolink II, Ivoclar) within a short (24 h) and long period of evaluation (90 days). Material and Methods: Forty recently extracted human molars had their roots removed and their occlusal dentin exposed and ground wet with 600-grit SiC paper. After application of one of the adhesives, the resin cement was applied to the bonded surface and a composite resin block was incrementally built up to a height of 5 mm (n = 10). The restored teeth were stored in distilled water at 37 C for 7 days. The teeth were then cut along two axes (x and y), producing beam-shaped specimens with 0.8 mm(2) cross-sectional area, which were subjected to mu TBS testing at a crosshead speed of 0.05 mm/min and stressed to failure after 24 h or 90 days of storage in water. The mu TBS data in MPa were subjected to three-way analysis of variance and Tukey's test (alpha = 0.05). Results: The interaction effect for all three factors was statistically significant (three-way ANOVA, p < 0.001). All eight experimental means (MPa) were compared by the Tukey's test (p < 0.05) and the following results were obtained: Tyrian-One Step Plus /C&B/24 h (22.4 +/- 7.3); Tyrian-One Step Plus /Variolink II/24 h (39.4 +/- 11.6); Xeno III/C&B/24 h (40.3 +/- 12.9); Xeno III/Variolink II/24 h (25.8 +/- 10.5); Tyrian-One Step Plus / C&B/90 d (22.1 +/- 12.8) Tyrian-One Step Plus/VariolinkII/90 d (24.2 +/- 14.2); Xeno III/C&B/90 d (27.0 +/- 13.5); Xeno III/Variolink II/90 d (33.0 +/- 8.9). Conclusions: Xeno III/Variolink II was the luting agent/adhesive combination that provided the most promising bond strength after 90 days of storage in water.

Comparative study of wax glands in four Meliponini bees (Hymenoptera, Apidae) producing different quantities of wax

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparison of leaf morphology and anatomy among Malva sylvestris (gerânio-aromático), Pelargonium graveolens (falsa-malva) and Pelargonium odoratissimum (gerânio-de-cheiro)

Malva sylvestris é comumente confundida com Pelargonium graveolens e Pelargonium odoratissimum devido às semelhanças na morfologia foliar. As folhas de M. sylvestris possuem antocianinas com propriedades citotóxicas, antiinflamatória, antitumoral e antioxidante já comprovadas cientificamente. As folhas de P. odoratissimum apresentam óleo essencial com propriedades antibacteriana e espasmolítica, e o óleo essencial da folha de P. graveolens possui atividade antimicrobiana e antifúngica. O objetivo deste estudo foi analisar morfo-anatomicamente as folhas destas espécies, apontando diferenças que possam ser utilizadas para esclarecer controvérsias na sua utilização como planta medicinal. Com a finalidade de se comparar anatomicamente a estrutura de cada planta, as amostras foram observadas por Microscopia de Luz e Microscopia Eletrônica de Varredura (MEV). A anatomia foliar entre as espécies foi bem distinta. Malva sylvestris apresentou tricomas do tipo capitado, estrelado e tector, além de drusas e células mucilaginosas. A distinção entre P. graveolens e P. odoratissimum foi observada em relação aos tricomas. Ambas as espécies apresentaram tricomas glandulares e tectores, sendo que P. graveolens se diferencia pela maior altura dos tricomas tectores e menor quantidade destes em relação ao P. odoratissimum. Este trabalho permitiu constatar diferenças anatômicas, auxiliando na taxonomia e classificação entre estas espécies.

Alloxan-Induced Diabetes Triggers the Development of Periodontal Disease in Rats

Background. Periodontal disease in diabetic patients presents higher severity and prevalence; and increased severity of ligature-induced periodontal disease has been verified in diabetic rats. However, in absence of aggressive stimuli such as ligatures, the influence of diabetes on rat periodontal tissues is incompletely explored. The aim of this study was to evaluate the establishment and progression of periodontal diseases in rats only with diabetes induction. Methodology/Principal Findings. Diabetes was induced in Wistar rats (n = 25) by intravenous administration of alloxan (42 mg/kg) and were analyzed at 1, 3, 6, 9 and 12 months after diabetes induction. The hemimandibles were removed and submitted to radiographical and histopathological procedures. A significant reduction was observed in height of bone crest in diabetic animals at 3, 6, 9 and 12 months, which was associated with increased numbers of osteoclasts and inflammatory cells. The histopathological analyses of diabetic rats also showed a reduction in density of collagen fibers, fibroblasts and blood vessels. Severe caries were also detected in the diabetic group. Conclusions/Significance. The results demonstrate that diabetes induction triggers, or even co-induces the onset of alterations which are typical of periodontal diseases even in the absence of aggressive factors such as ligatures. Therefore, diabetes induction renders a previously resistant host into a susceptible phenotype, and hence diabetes can be considered a very important risk factor to the development of periodontal disease.

Impact of overseeding cool-season annual forages on spring regrowth of tifton 85 bermudagrass

Field observations have shown stand reduction and slow spring regrowth of Tifton. 85 bermudagrass (Cynodon spp.) pastures overseeded with temperate forages for grazing during the cool season. This experiment compared the effect of cool-season management programs, including overseeding and use of different grazing treatments, on productivity of Tifton 85 the following warm season. There were seven treatments: four were bermudagrass overseeded with a cool-season annual forage mixture (two grasses and two legumes) and grazed differentially, and three were bermudagrass controls With differences in amount of residual stubble remaining at beginning of autumn. There was only a slight delay in initiation of Tifton 85 spring regrowth relative to the unseeded controls and no apparent stand loss resulting from overseeding cool-season forages. Late spring and summer Tifton 85 production generally was greater on seeded than non-seeded areas, possibly resulting from the nitrogen (N) release from decaying cool-season legumes. Grazing management of winter species in seeded plots and stubble height of bermudagrass in control plots had no effect on bermudagrass performance. Nutritive value responses generally favored overseeded plots. These data, though from one year, show no negative effect on Tifton 85 bermudagrass performance from overseeding and grazing cool-season annual forages during winter.

Performance of Cultivars for Production of Green Corn in Different Planting Dates in Passos Region, MG

The aim of this work was evaluating the performance of several cultivars of green corn for consumption 'in natura' in different planting dates. The first planting date was on May 26th, and the others, every 40 days. The hybrids (treatments) were: AG-1051, Agroeste 1567, BM-3061, Prezoto-32D10, PL-6880, BX-1382 and GNZ-2004. The following characteristics were evaluated: production, commercial ears weight without husk, commercial ears number, commercial ears diameter and length, male flowering, plant height and height of ear corn insertion. The cultivars AG1051, Agroeste 1567 and BM 3061 presented the best results compared to the others and they should be used in green corn production for ` in natura' consumption in Passos County, MG.

Effect of mismatching abutments on implants with wider platforms - an experimental study in dogs

Aim: To evaluate the effect of mismatching abutments on implants with a wider platform on the peri-implant hard tissue remodeling and the soft tissue dimensions.Material and methods: Mandibular premolars and first molars of six Labrador dogs were extracted bilaterally. After 3 months of healing, one tapered implant was installed on each side of the mandibular molar region with the implant shoulder placed at the level of the buccal alveolar bony crest. on the right side of the mandible, an abutment of reduced diameter in relation to the platform of the implant was used, creating a mismatch of 0.85 mm (test), whereas an abutment of the same diameter of the implant platform was affixed in the left side of the mandible (control). The flaps were sutured to allow a non-submerged healing. After 4 months, the animals were sacrificed and ground sections were obtained for histometric assessment.Results: All implants were completely osseo-integrated. Bone levels were superior at the test than at the control sites. However, statistically significant differences were found only at the buccal and proximal aspects. The soft tissue vertical dimension was higher at the control compared with the test sites. However, statistically significant differences were demonstrated only at the buccal aspects.Conclusions: A mismatch of 0.85 mm between the implant and the abutment yielded more coronal levels of bone-to-implant contact and a reduced height of the peri-implant soft tissue (biologic width), especially at the buccal aspect, if the implant shoulder was placed flush with the level of the buccal alveolar bony crest.

Foraminiferal ecological zonation along a Brazilian mangrove transect: Diversity, morphotypes and the influence of subaerial exposure time.

Two foraminiferal associations comprising only arenaceous species define two distinct environments in a 340 m-long mangrove transect at Cardoso Island, Trapande Bay (Cananeia-Iguape estuarine system, SP, Brazil). The "lower muddy flat" (LMF), from the outer mangrove fringe inwards towards land (100 m), is positioned in the lower plain between 0.04 and 0.23 m above the mean sea level (msl), and remains subaerially exposed between 48.5 and 65.6% of the time. This environment is characterized by higher foraminiferal diversity and evenness (McIntosh's D = 0.54 [plus or minus] 0.21 and Pielou's E = 0.68 [plus or minus] 0.25, respectively) and is dominated by Arenoparrella mexicana and Trochammina inflata, and to a lesser extent by Ammotium directum and Textularia earlandi. The mangrove plant of this segment is a Rhizophoretum with average height of 8.4 [plus or minus] 1.2 m. The sediment is characterized by higher concentration of organic matter (93.5 [plus or minus] 32.3 g dm-3) and metals (e.g. V = 53.4 [plus or minus] 21.8 ppm and Zn = 46.4 [plus or minus] 21.3 ppm). The "upper sandy flat" (USF), 240 m wide along the transect, is positioned in the upper plain between 0.28 and 0.89 m above the msl, and remains subaerially exposed between 69.7 and 98.5% of the time. This environment is characterized by a lower diversity and evenness (D = 0.33 [plus or minus] 0.17 and E = 0.49 [plus or minus] 0.20, respectively). The association is dominated by species T. inflata and Miliammina fusca. The Rhizophoretum exhibits a lower average height of 3.6 [plus or minus] 0.6 m. The sediment is poorer in organic matter (39.3 [plus or minus] 15.0 g dm-3) and metals (e.g. V = 13.0 [plus or minus] 6.8 ppm and Zn = 6.9 [plus or minus] 3.7 ppm). Whereas "elongate" tests (uniserial, biserial and planospiral followed by a uniserial portion) are restricted to the LMF, "spiraled" species dominate the USF. Subaerial exposure time seems to exert a primary influence on species distribution, in addition to salinity and sediment type. Species may be adapted to different exposure times, a factor dependent on their position on the intertidal zone and the tidal regime, which should be taken into account in relative sea level reconstructions based on intertidal foraminifera. These patterns have important implications for studies investigating the ecology and paleoecology of foraminifera and subtle fluctuations in relative sea level during the Quaternary.

Histology and morphometry of the testes of adult domestic cats (Felis catus)

Testicles of 30 mongrel cats were analyzed histologically and morphometrically, divided into three groups: G1 (1-2 years old), G2 (over 2 and up to 4 years old) and G3 (over 4 and up to 6 years old). After orchiectomy and histopathology, the morphometric parameters studied were: thickness of the tunica albuginea (72 mu m) and seminiferous epithelium (77.19 mu m), perimeter (53.81; 90.57 mu m), (54.80; 101.07 mu m); area (174.23; 494.55 mu m(2)), (176.68; 629.70 mu m(2)); maximum diameter (14.94; 28.02 mu m), (14.76; 31.66 mu m); minimum diameter (13.25; 21.92 mu m), (13.30; 24.52 mu m); and shape factor (index for regularity of the format) (1.36; 1.36), (1.39; 1.35) of the nucleus and cytoplasm of spermatogonia and Leydig cells, respectively. The results can be used for comparative studies and contribute knowledge concerning the height of the seminiferous epithelium, thickness of the tunica albuginea and size of spermatogonia and Leydig cells.

Optimizing the design of preactivated titanium T-loop springs with Loop software

ATMA (Ormco Corp, Glendora, Calif) T-loop spring (TTLS), preactivated with a gable bend distal to the loop, holds promise for producing controlled tipping of the canines and translation of the posterior segment. However, there is currently no consensus as to where the preactivated gable bend or the loop should be placed, what the height of the loop should be, or how the interbracket distance changes the moments produced. Using the Loop software program (dHal, Athens, Greece), we systematically modified a .017 x .025-in TTLS (10 x 6 mm) that was preactivated with a 45 degrees gable bend distal to the loop, and simulated the effects. As the gable bend was moved posteriorly, the moment increased at the posterior bracket more than it decreased at the anterior bracket. As the loop was brought closer to the anterior bracket, the posterior moment decreased at the same rate that it increased anteriorly. As the loop was increased in size, the moments increased both posteriorly and anteriorly. As the interbracket distance increased, the posterior moment decreased, and the anterior moment remained constant. We concluded that the size of the loop should be slightly increased, to 10 x 7 mm, and it should be placed 2 mm from the anterior bracket, with a preactivation bend of 45 degrees, 4 to 5 mm from the posterior bracket (after 4 mm of activation).

A case study of the 9 August 1988 South Atlantic storm: Numerical simulations of the wave activity

During 9-11 August 1988, a cyclone developed over Uruguay in the lee of the Andes Mountains and moved over the South Atlantic Ocean, where it redeveloped into an intense storm. This storm was responsible for unusual wave activity along the Brazilian shoreline from 22° to 32°S. The Brazilian news media reported the loss of at least one life, waves of 3 m and higher, and the disappearance of a drainage pipe, which weighed 8000 kg, off the shores of Rio de Janeiro. In this paper, the evolution of this intense storm and the associated ocean wave response is studied through European Centre for Medium-Range Weather Forecasts analyses, a hydrostatic limited-area meteorological model, and a second-generation prognostic wave model. The atmospheric model results indicated the presence of a long-lived and large fetch with surface wind velocities higher than 12 m s -1 directed toward the coast. Some areas with velocities of 20 m s -1 were embedded in the fetch. The wave model forced by this wind field was able to simulate waves with a significant height of 8 m far from the coast and about 4 m in regions very close to the Brazilian coast in agreement with the occurrence reported at Rio de Janeiro. The swell propagation toward the coast of Rio de Janeiro was obstructed by a northeastward 10-m wind during the first 24-h period of the model's integration. During the second 24-h period, the fetch was still large and strong, but the obstacle was removed by a counterclockwise rotation of wind direction favoring the swell and windsea propagation toward the Rio de Janeiro coast.

Heritability of sting characters in Africanized honeybees

In this paper we proposed to estimate the heritability of seven morphological characters that compose the sting apparatus ofthe Africanized honeybee workers. An experimental design to estimate genetic parameters was based on the method developed by Oldroyd and Moran. This method was modified to eliminate within-colony environmental effects associated with the additive genetic variance. The estimated h2 values ranged from 0.17 ± 0.11 (maximum width of bulb of sting stylet and height of the valve of right lancet) to 0.74 ± 0.30 (length of the lancet).

Pre-concentration of Cd(II), Cr(III), Cu(II) and Ni(II) on a column packed with free carboxymethylcellulose (CMCH)

Carboxymethylcellulose packed in to a glass column was used to pre-concentrate metallic cations from aqueous solutions. The pre-concentrated metal cations are directly eluted from the column using 5.0 mL of 1.0 mol L -1 hydrochloric acid. The optimum pre-concentration conditions are given (glass column, 16 cm length, 0.80 cm i.d., stationary phase height of 12 cm, flow-rate, 1.5 mL min -1). The recuperation efficiency achieved is greater than 95%, while the enrichment factor is 10 for 50 mL of solution (0.50 mg L -1 each).

Evaluation and identification of lightning models by artificial neural networks

This paper describes a novel approach for mapping lightning models using artificial neural networks. The networks acts as identifier of structural features of the lightning models so that output parameters can be estimated and generalized from an input parameter set. Simulation examples are presented to validate the proposed approach. More specifically, the neural networks are used to compute electrical field intensity and critical disruptive voltage taking into account several atmospheric and structural factors, such as pressure, temperature, humidity, distance between phases, height of bus bars, and wave forms. A comparative analysis with other approaches is also provided to illustrate this new methodology.