Efficacy of Surface Treatments on the Bond Strength of Resin Cements to Two Brands of Zirconia Ceramic

Purpose: To compare the shear bond strength (SBS) of two cements to two Y-TZP ceramics subjected to different surface treatments.Materials and Methods: Zirconia specimens were made from Lava (n = 36) and IPS e.max ZirCAD (n = 36), and their surfaces were treated as follows: no treatment (control), silica coating with 30-mu m silica-modified alumina (Al2O3) particles (CoJet Sand), or coating with liners Lava Ceram for Lava and Intensive ZirLiner for IPS e.max ZirCAD. Composite resin cylinders were bonded to zirconia with Panavia F or RelyX Unicem resin cements. All specimens were thermocycled (6000 cycles at 5 degrees C/55 degrees C) and subjected to SBS testing. Data were analyzed by post-hoc test Tamhane T2 and Scheffe tests (alpha = 0.05). Failure mode was analyzed by stereomicroscope and SEM.Results: With both zirconia brands, CoJet Sand showed significantly higher SBS values than control groups only when used with RelyX Unicem (p = 0.0001). Surface treatment with liners gave higher SBS than control groups with both ceramic brands and cements (p < 0.001). With both zirconia brands, the highest SBS values were obtained with the CoJet and RelyX Unicem combination (> 13.47 MPa). Panavia F cement showed significantly better results when coupled with liner surface treatment rather than with CoJet (p = 0.0001, SBS > 12.23 MPa). In untreated controls, Panavia F showed higher bond strength than RelyX Unicem; the difference was significant (p = 0.016) in IPS e.max ZirCAD. The nontreated specimens and those treated with CoJet Sand exhibited a high percentage of adhesive and mixed A (primarily adhesive) failures, while the specimens treated with liners presented an increase in mixed A and mixed C (primarily cohesive) failures as well as some cohesive failure in the bulk of Lava Ceram for both cements.Conclusion: CoJet Sand and liner application effectively improved the SBS between zirconia and luting cements. This study suggests that different interactions between surface treatments and luting cements yield different SBS: in clinical practice, these interactions should be considered when combining luting cements with surface treatments in order to obtain the maximum bond strength to zirconia restorations.

Evaluation of bond strength and thickness of adhesive layer according to the techniques of applying adhesives in composite resin restorations

Adhesive restorations have increasingly been used in dentistry, and the adhesive system application technique may determine the success of the restorative procedure. The aim of this study was to evaluate the influence of the application technique of two adhesive systems (Clearfil SE Bond and Adper Scotchbond MultiPurpose) on the bond strength and adhesive layer of composite resin restorations. Eight human third molars were selected and prepared with Class I occlusal cavities. The teeth were restored with composite using various application techniques for both adhesives, according to the following groups (n = 10): group 1 (control), systems were applied and adhesive was immediately light activated for 20 seconds without removing excesses; group 2, excess adhesive was removed with a gentle jet of air for 5 seconds; group 3, excess was removed with a dry microbrush-type device; and group 4, a gentle jet of air was applied after the microbrush and then light activation was performed. After this, the teeth were submitted to microtensile testing. For the two systems tested, no statistical differences were observed between groups 1 and 2. Groups 3 and 4 presented higher bond strength values compared with the other studied groups, allowing the conclusion that excess adhesive removal with a dry micro-brush could improve bond strength in composite restorations. Predominance of adhesive fracture and thicker adhesive layer were observed via scanning electron microscopy (SEM) in groups 1 and 2. For groups 3 and 4, a mixed failure pattern and thinner adhesive layer were verified. Clinicians should be aware that excess adhesive may negatively affect bond strength, whereas a thin, uniform adhesive layer appears to be favorable. (Quintessence Int 2013;44:9-15)

Desenvolvimento de aplicações Web com base em modelagem 3D: módulo Android

This project brings the development of an Android application which will allow users to access 3D models on web. The application developed allows Android devices to access web pages which have code that should use OPENGL to renderize. To demonstrate this functionality, an example web application was build, using technologies such as X3DOM and HTML5, which uses WebGL to get renderized. This web application gives to the user an environment of a virtual city, where he could surf by and interact with the objects. The Android application brings this immersion to the mobile world, also. The access and storage of data was developed a Webserver, which bring to the web application a simple API to give access to the database

Adaptação marginal do agregado de trióxido mineral com e sem cloreto de cálcio em retrocavidades

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Load-application devices: a comparative strain gauge analysis

In view of the low loading values commonly employed in dentistry, a load-application device (LAD) was developed as option to the universal testing machine (UTM), using strain gauge analysis. The aim of this study was to develop a load-application device (LAD) and compare the LAD with the UTM apparatus under axial and non-axial loads. An external hexagonal implant was inserted into a polyurethane block and one EsthetiCone abutment was connected to the implant. A plastic prosthetic cylinder was screwed onto the abutment and a conical pattern crown was fabricated using acrylic resin. An impression was made and ten identical standard acrylic resin patterns were obtained from the crown impression, which were cast in nickel-chromium alloy (n=10). Four strain gauges were bonded diametrically around the implant. The specimens were subjected to central (C) and lateral (L) axial loads of 30 kgf, on both devices: G1: LAD/C; G2: LAD/L; G3: UTM/C; G4: UTM/L. The data (με) were statistically analyzed by repeated measures ANOVA and Tukey's test (p<0.05). No statistically significant difference was found between the UTM and LAD devices, regardless of the type of load. It was concluded that the LAD is a reliable alternative, which induces microstrains to implants similar to those obtained with the UTM.

Aplicação mecanizada de N-P-K individualizada na cultura da cana-de-açúcar

Pós-graduação em Agronomia (Produção Vegetal) - FCAV

Natação e desenvolvimento motor em idade escolar

Swimming is a sport well suited to any age group, it worked properly when the individual stimuli that provides assist in human development. But water stimulation, is not something that is so easily in physical education in Brazil. Development corresponds to changes that occur throughout life, but that depends on the stimuli provided. Several studies have shown positive effects of swimming in relation to the child. This study aimed to verify if children swimmers and physical education classes have better motor development than those who do not practice the sport. Collection was done with two groups of 10 students between 9 and 11 years. As a group consisting of non-swimmers, and another formed by those that complement the physical education class with the regular practice of swimming. To develop the study was administered a battery of the proposed motor adapted Rosa Neto (2002) in which each child performed tasks corresponding to their chronological age (CA) and were only able to perform the task at a later age, when it was obtained successful in completing the task as originally proposed. At the end of the application of all statistical tests was done getting mean and standard deviation of the old motor (IM), calculated the ratio General Motor (MGQ) for the classification of the child's motor development and application of the t test with p <0.05 to observe the level of significance in the results. The results showed that the group swimmers had better agility tests which resulted in a difference between (IC) and (IM) higher compared with the non-practitioner. They also had higher average (MGQ), but these were not sufficient to classify the group into another level of development, however, by observing isolated cases, two children that practice would be a greater level of development. Through the t test was observed that the group swimmers had significant difference in balance ability. We conclude that the swimming group got positive overall...

Elaboração de um material didático aplicado ao ensino de física para utilização do experimento virtual da dupla fenda

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo de segurança de cosméticos: presente e futuro

Cosmetics have been used since ancient times and, recently, their consumption has increased greatly in many countries, including brazil, which is the third largest consumer market in the world. Thus, concern for the safety and efficacy of these products should be heightened, even though these products are rarely related to adverse reactions that damage the health. Brazilian law requires manufacturers to subject their products to safety testing, to assess the possible reactions that could be caused by them (irritation, sensitization, systemic effects). To this end, in general, animals have been used as the experimental model, but this practice is being increasingly controlled, so that the scientific community is looking for alternative tests that do not require experimental in vivo models. Thus, this review aims to describe the main biological assays used to assess the safety of cosmetics, as well as in vitro assays that can replace them.

Sphenophorus levis Vaurie, 1978 (Coleoptera: Curculionidae): caracterização macroscópica e determinação de inseticida e época de aplicação para controle

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Portal único (SILSTM) para ovário-histerectomia vídeo-assistida em cadelas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

SNIIC: a plataforma digital de cultura brasileira sob a perspectiva das convergências entre o Design e a Ciência da Informação

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)