Análise de causas de trincas em carro de translação de empilhadeira/recuperadora

The present work aims to study the possible causes of cracks founded and recovered in translation cars of ore Forklift / ore Reclaimer. To identify the possible causes of cracks observed on the equipment it was used a static approach analysis, using a finite element method as an analysis tool, using a specific structural analysis program. After making the model, a strain gage measurement was necessary because there may be significant amounts of masses of non-structural components that were not modeled and were not available in the drawings, as well as fouling ore. With the calibrated model it was processed analyses with the load cases of dead load, product, wind and excavation. After the processing, it was observed that none of these load cases resulted in values that caused the crack, so another three hypotheses were tested: depression and misalignment, jacking and translation of only three cars. Of these three hypotheses it was observed that the jacking coud be the cause of the cracks, because the distribution of stress. Due to the miss of parameters, like the height utilized in this process, it was not possible to affirm the real stress level

Implantação do sistema kanban para elementos de fixação em maquinas de movimentação de terra

Always seeking the maximum profit under the reduced production time and lower number of failures, companies are increasingly evolving and going after continuous improvement in order to remain competitive in the market. Thus, increasingly there is investment in the management system Lean manufacturing. Lean system is very important, because through it, the maximum value is added in the final product. Being measured by the efficiency and reducing failures to zero. In the studied company, Lean manufacturing system came into effect through the kanban system for purchasing, control and distribution of bulk material used in the assembly of the final product, which are earth-moving machines. It is very important to check the great change made in the company with the implementation of kanban. All inventory management becomes visual, elements are arranged in an organized manner, with addresses in structures, calculated in special boxes and finally, assemblers have the guarantee of an item supply, with the distribution cars located on their assembly area. This study participates effectively assuring the supply. Avoiding any failure on the lack of material, non-compliance of delivery times to the customer and maintenance of over-stock or obsolete inventory, in which case both cause financial loss to the company

O uso de geotecnologias para mapeamento de áreas verdes urbanas e análise da percepção ambiental no município de São Paulo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cana-de-açúcar e álcool combustível: histórico, sustentabilidade e segurança energética

The cane sugar is important since the early days in the history of the country, following the discovery of Brazil since the colonial period, therefore, the culture has an important role in the Brazilian economy, being one of the main products. In the 1970s with the advent of the economic crisis, geopolitical and the possibility of depletion of oil, countries dependent on imported fuel, sought new energy alternatives. In Brazil, it was decreed in 1975 the creation of the National Alcohol Program - PROALCOOL, who had several years of rising, the increase of distilleries and marketing of cars powered with ethanol blend. Due to the decrease in the price of oil the importance of the program significantly reduced, returning to peak only in 1979, ie, the second phase of the program. Conceived as one of the vectors of the national response to the crisis in oil prices '70s, the program persisted at times rising in others not reaching for more than three decades. Brazil is the second largest ethanol producer, second only to the U.S., where the raw material comes from corn, which becomes a bottleneck biodiesel production because it competes with food production. New technologies developed to increase ethanol production combined with sustainability and economic viability are being held, the principal is the second generation ethanol, known as cellulosic ethanol, ethanol plus third and fourth generation.

Simulação de um sistema de reputação centralizado para VANETs

Pós-graduação em Ciência da Computação - IBILCE

Estudo da viabilidade de implantação do INOVAR-AUTO utilizando o método do fluxo de caixa sob risco

The automobile industry has a growing importance in the Brazilian economic environment. The industry moves a huge chain that encompasses manufacturers, suppliers of raw materials, auto parts dealers, gas stations, insurance companies, repair shops, tire stores, media companies, advertising agencies, among others. Because of this importance in the current economic environment in Brazil, the federal government, through Law No. 12715 of 17 December 2012 established a Program for the Promotion of Innovation and Densification in the Productive Chain of Motor Vehicles called INOVAR-AUTO in order to support technological development, innovation, safety, environmental protection, energy efficiency and quality of cars, trucks, buses and auto parts. The specific purpose of this study, a simulation for discussion of the viability of the program implementation using the Monte Carlo Simulation combined with the Cash-Flow-at-Risk was performed. To this end, an exploratory and documentary literature on the subject was held as well as a case study in a automobile company of Japanese origin

Avaliação da rigidez torcional do chassi de um protótipo Baja SAE através do método de elementos finitos e de ensaio experimental

The torsional stiffness of chassis is one of the most important properties of a vehicle's structure and therefore its measurement is important. For the first time, the torsional stiffness was considered on the design of a prototype Baja SAE of the team from UNESP - FEG, Equipe Piratas do Vale Bardahl. According to the team's opinion, the increase of stiffness on this prototype, called MB1114, made possible a great improvement in its performance during competitions. In this work, the experimental evaluation of the torsional stiffness from this prototype is performed, detailing the analysis of results, as well as, the hysteresis' effect, least-squares regression and uncertainty analysis. It also shows that it is possible to measure the torsional stiffness of chassis with a low experimental uncertainty without expending many resources. The test rig costed R$ 32,50 due the reuse of materials and the use of instrumentation already available on campus. Furthermore, it is simple to produce and can be easily stocked. Those features are important for Baja and Formula SAE teams. Lastly, the measured value is used to validate the finite element analysis performed by the team during this prototype's design, because similar studies will be performed for the new cars. After investigating the finite element analysis, one result 13,5% higher than the measured value was reached. This difference is believed to be occurred due the imperfections of the finite element model, in other words, for not been possible to simulate every phenomena present on the real model