Rat nephrotoxic nephritis. The relation between the type and intensity of induced histological lesions and the content of antiglomerular basement membrane antibodies of the inoculated serum

Six groups of 6 rats received equal doses (0.8 ml/100 g of body weight) of different rabbit anti rat kidney sera. The titer of anti GBM antibodies in the sera was evaluated by indirect immunofluorescent test in isolated GBM (IIT GBM). Rats of groups 1, 2, 3, 5, 6 received anti rat GBM sera with titers of 1/320, 1/240, 1/160, 1/60, 1/30 respectively. Group 4 received anti rat kidney serum with a titer of 1/80. The rats of group 1 died from 1 to 5 minutes after inoculation and their kidney were congested, with hialine trombi occluding arterioles and glomerular capillaries. The rats of group 2 and one of group 3 died from 2 to 15 days after inoculation and diffuse cortical necrosis was found. The remaining rats were sacrificed 2 months after inoculation. The kidneys were normal in control group; chronic membranoproliferative glomerulonephritis was observed in group 3 and 4, membranoproliferative glomerulonephritis in group 5 and minimal changes in group 6. By immunofluorescence rabbit gammaglobulin was seen in GBM of group 3, 4, 5 and 6. The IIT GBM performed in the eluates of the kidneys revealed the presence of heterologous antibody in groups 1, 2, 3, 4, 5 and 6 and autologous antibody in groups 3, 4 and 5. One concludes that the IIT GBM identifies and quantifies antibodies which have the property of damaging the kidney.

The Araguaia fold belt, Brazil: A reactivated Brasiliano-Pan-African cycle (550 Ma) geosuture

The Araguaia-Tocantins geosuture, which separates the Araguaia Fold Belt (AFB) from the Archean Amazonian Craton, was active in the late Middle Proterozoic. The Baixo Araguaia Supergroup was deposited, consisting of the Estrondo Group (lower quartzites with intercalated schists), Xambioá Formation (schists), and Canto da Vazante Formation (upper feldspathic schists); and the Tocantins Group consisting of the Couto Magalhaës Formation (phyllites, quartzites, slates, limestones, and metacherts) and Pequizeiro Formation (upper chlorite schists); and associated mafic-ultramafic bodies. The deformational history includes four regional phases of deformation within this supracrustal sequence: recumbent folds with vergence to the west; refolding with a N-S trend; an intense crenulation episode; and late thrusting from east to west. Metamorphism is of intermediate or intermediate-high pressure type with garnet, biotite, chlorite, and sericite isograds succeeded by a slightly or non-metamorphosed zone, from east to west. Rocks surrounding sparse gneissic-cored domes contain isograds of staurolite, kyanite, and fibrolite. These isograds are believed to be associated with the 1100 Ma Uruaçuano event. The Brasiliano Orogeny strongly affected the AFB with displacements due to transcurrent reactivation of great and old faults of the basement, slight folding in the supracrustal sequence, intrusion of small granite bodies, and development of domes with associated normal faults. The area underlain by the Estrondo Group was uplifted at this time, causing the deposition of the Rio das Barreiras polymictic conglomerate of the central area. K-Ar and Rb-Sr analyses date this thermo-tectonic event at 550 ± 100 Ma. The Archean basement is exposed in the cores of domes as a granite-gneiss association, the Colméia complex, which shows thermo-tectonic features that may be interpreted as polycyclic imprints (Jequié, Transamazonian?, Uruaçuano, and Brasiliano Events). © 1989.

Northwestern overthrusting and related lateral escape during the Brasiliano orogeny north of the Patos lineament, Borborema province, northeast Brazil

The Borborema province (BP) of northeastern Brazil, located between the São Luís and São Francisco cratons, represents a branching system of Precambrian orogens of the South American platform. It is composed of segments of Archean and Proterozoic crust that were deformed by the convergence of the West African and São Francisco-Congo cratons during assembly of the Brasiliano collage (650 to 500 Ma), a period of intense orogenic activity considered to be the strongest and most pervasive tectonic event that affected the Precambrian of the South American platform. The tectonic and kinematic history of the Brasiliano/Panafrican orogeny is fundamental for reconstructing South American and African Precambrian geology. The correlation between Neoproterozoic tectonic processes occurring in both continents should use structural elements, of regional or local character, with identical kinematic and metamorphic conditions manifested in both basement and supracrustal units. North of the Patos shear zone, subhorizontal Brasiliano thrusts (0.65 to 0.58 Ga) affected the basement and the supracrustal Seridó belt with such related regional D1/D2 structures as foliation, lineation, isoclinal folds, and related metamorphism. Overprinting the previous structures, regional folding with a vertical S3 foliation and an associated strike-slip shear zone were developed (0.58 to 0.52 Ga). The metamorphism is similar for all deformation phases, ranging from upper-greenschist to amphibolite facies with mineral assemblages including biolite and garnet throughout the Seridó fold belt. We propose, on the basis of deformational and kinematic reconstructions, that the structural evolution of the Seridó fold belt was characterized by transition from a syn-collisional to a strike-slip regime. The transition between regimes occurred, progressively or instantaneously, by the switching of the maximum and intermediary strain axes of the strain ellipsoid. The entire tectonic history can be related to a frontal or oblique collision and lateral escape tectonics, with local, syn-collisional transpression and transtension. The Patos shear zone represents a final vertical shearing, juxtaposing different terranes of the northern and southern Borborema province.

Aplicação do Índice Relaçáo Declividade-Extensão - RDE Na Bacia do Rio do Peixe (SP) para Detecção de Deformações Neotectô nicas

This paper presents the identification of tectonic deformation through the application of the stream-gradient index (slope x length) method in the Rio do Peixe hydrographic basin, located in western State of Sã o Paulo. The main principle used is that river valleys are the best tools for this type of analysis because of their fast adjustment to even the most gentle crustal deformations. This type of analysis for structural studies is extremely useful in the western region of the State of São Paulo, where deep chemical weathering results in a thick regolith and scarce outcrops. The stream length index is the ratio of the altimetric amplitude of each drainage and the natural logarithm of its length. The value obtained is plotted on maps at the median point of each drainage, allowing the drawings of lines with the same values (isodefs). Three anomalies (A, B and C) were identified along the Rio do Peixe valley representing uplift sectors indicated by the formation and distribution of Upper Quaternary deposits in terraces and modern fluvial plains and alluvial fans. In correlation with known tectonic data for this region it is possible to attribute the A and B anomalies to the Ribeirão Preto and Presidente Prudente crustal sutures, respectively. The smaller C anomaly needs further field investigation, but it could be associated with the Três Lagoas crustal suture. It must be emphasised that these sutures are inherited from the Precambrian Basement which had a strong influence on the Phanerozoic evolution in the whole sedimentary and volcanic stratigraphic pile of the Paraná Basin and on the dominant structural lineaments directions developed therein .The A, Band C anomalies are suggestive of renewed uplift as a result of neotectonic action in modern times.

Detecção de prováveis deformações neotectônicas no Vale do Rio do Peixe, Região Ocidental Paulista, mediante aplicaçao de Índices RDE (Relac̈ão Declividade-Extensão) em segmentos de drenagem

Running water is one of the most important of all the physical processes which fashion the landscape, allowing gravity to operate along the valley floors. Besides this, the streams show a fast adjustment to the crustal deformations, even to the most gentle ones. This geologic behavior turns them a potential tool for neotectonic studies, specially the analysis of morphotnetric parameters associated with hydraulic gradient and discharge, this second factor being directly proportional to the extension of the streams. Both elements, gradient and stream length, can be combined in the SL index. The purpose of this paper is to show the RDE index application in the neotectonics analysis of the Rio do Peixe hydrographic basin and to compare the obtained values with the geologic basement incised by the streams. This basement encompasses Cretaceous sedimentary rocks of post-Serra Oeral Formation magmatism (Caiuá and Bauru groups) and Quaternary deposits that include chiefly recent alluvial plains and some Pleistocene terrace deposits. In the final part of this paper, an attempt is made in order to correlate the RDE results and the neotectonic framework admitted to this portion of the São Paulo State territory, as well as with field geologic, seismologic and paleoseismologic known elements. The results indicate the presence of two groups of anomalies: The first set corresponds to the Marília-Exaporã Plateau border, and the second one, located in the central portion of the hydrographic basin, is correlated to the Presidente Prudente seimogenic zone.

Microstructure evolution during warm deformation of low carbon steel with dispersed cementite

The microstructure evolution and mechanical behavior during large strain of a 0.16%C-Mn steel has been investigated by warm torsion tests. These experiments were carried out at 685°C at equivalent strain rate of 0.1 s . The initial microstructure composed of a martensite matrix with uniformly dispersed fine cementite particles was attained by quenching and tempering. The microstructure evolution during tempering and straining was performed through interrupted tests. As the material was reheated to testing temperature, well-defined cell structure was created and subgrains within lath martensite were observed by TEM; strong recovery took place, decreasing the dislocation density. After 1 hour at the test temperature and without straining, EBSD technique showed the formation of new grains. The flow stress curves measured had a peculiar shape: rapid work hardening to a hump, followed by an extensive flow-softening region. 65% of the boundaries observed in the sample strained to ε = 1.0 were high angle grain boundaries. After straining to ε = 5.0, average ferrite grain size close to 1.5 μm was found, suggesting that dynamic recrystallization took place. Also, two sets of cementite particles were observed: large particles aligned with straining direction and smaller particles more uniformly dispersed. The fragmentation or grain subdivision that occurred during reheating and tempering time was essential for the formation of ultrafine grained microstructure.

Caracterização das falhas de transferência na porção norte da Bacia de Santos a partir da integração de dados geológicos e geofísicos

Structures transverse/sub-transverse to the shoreline have been identified and characterized on the precambrian basement outcrop on the continent adjacent to the northern Santos Basin. These structures were analyzed from images of digital elevation model SRTM 90m by extracting NW-SE lineaments that intersect the NE-SW foliation. The lineaments were selected, classified into 48 segments that extend toward offshore, and correlated with basin structures. In the basin 25 2D seismic sections, 12 well logs and data from potential methods were interpreted, identifying the key stratigraphic levels and the major structures. Structural maps of each horizon were generated. Six transfer faults (FTs) were recognized and named FT-1 to FT-6, whose extensions correspond to continental lineaments named FC1 to FC6. The FTs are related to the basin deformation and evolution. In seismic sections, these faults have lateral slip in flower structures, displacement inversions from normal at the top to reverse at the base, abrupt changes in thickness or even disappearance of the seismic reflectors. The structural map of the Basement and Top of the Rift shows control of some depocenters by faults and displacements in some areas. The maps of potential methods indicate that there are pronounced anomaly shifts in some areas, associated with FTs. Some seismic sections indicate reactivation of FTs when they intersect horizons from the basement until the most recent layers. The 3D integration of data facilitated the observation of the FT extensions in the continent discontinuity.

Compartimentação morfoestrutural da região do Triângulo Mineiro (MG): aplicado a exploração de recursos hídricos subterrâneos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of Implant Drill Materials on Wear, Deformation, and Roughness After Repeated Drilling and Sterilization

Purpose:The aim of this study was to evaluate deformation, roughness, and mass loss of stainless steel, diamond-like carbon (DLC)-coated and zirconia drills after multiple osteotomies with sterilization procedures.Materials and Methods:Drilling procedures were performed using stainless steel (G1), DLC-coated (G2), and zirconia (G3) drills. All groups were divided in subgroups 1, 2, 3, 4, and 5, corresponded to drills used 0, 10, 20, 30, and 40 times, respectively.Results:No significant differences in mass and roughness were detected among all groups and subgroups. In SEM images, all groups revealed signs of wear while coating delamination was detected in G2. Drills from G1 displayed more irregular surface, whereas cutting edges were more regular in G3.Conclusion:Zirconia drills presented more regular surfaces whereas stainless steel drills revealed more severe signs of wear. Further studies must be performed to evaluate the putative influence of these findings in heat generation.

Evaluation of Bone Heating, Drill Deformation, and Drill Roughness After Implant Osteotomy: Guided Surgery and Classic Drilling Procedure

Purpose: This study evaluated and compared bone heating, drill deformation, and drill roughness after several implant osteotomies in the guided surgery technique and the classic drilling procedure. Materials and Methods: The tibias of 20 rabbits were used. The animals were divided into a guided surgery group (GG) and a control group (CG); subgroups were then designated (G0, G1, G2, G3, and G4, corresponding to drills used 0, 10, 20, 30 and 40 times, respectively). Each animal received 10 sequential osteotomies (5 in each tibia) with each technique. Thermal changes were quantified, drill roughness was measured, and the drills were subjected to scanning electron microscopy. Results: Bone temperature generated by drilling was significantly higher in the GG than in the CG. Drill deformation in the GG and CG increased with drill use, and in the CG a significant difference between GO and groups G3 and G4 was observed. In the GG, a significant difference between GO and all other groups was found. For GG versus CG, a significant difference was found in the 40th osteotomy. Drill roughness in both groups was progressive in accordance with increased use, but there was no statistically significant difference between subgroups or between GG and CG overall. Conclusion: During preparation of implant osteotomies, the guided surgery technique generated a higher bone temperature and deformed drills more than the classic drilling procedure. The increase in tissue temperature was directly proportional to the number of times drills were used, but neither technique generated critical necrosis-inducing temperatures. Drill deformation was directly proportional to the number of times the drills were used. The roughness of the drills was directly proportional to the number of reuses in both groups but tended to be higher in the GG group.

An integrable deformation of the AdS(5) x S-5 superstring

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Caracterização petrográfica e geoquímica das rochas encaixantes da mineralização de ouro do alvo lavra velha - Ibitiara (BA)

The Lavra Velha gold prospect is located in Ibitiara city, in the Espinhaço Setentrional physiographic domain, on the west edge of Chapada Diamantina – central part of Bahia. It is inserting on Gavião Block, a compartment of São Francisco Cráton (Almeida, 1977). The Lavra Velha gold dump is formed by an association of hydrothermal breccia lodged in acid and intermediate rocks, classifying in tonalite, granodiorite and diorite, with high alteration, cut off by a vein and venules system constituted by hydrothermal association composed by hematite, tourmaline, quarz and sericite, located in the north limit of Ibitiara granite. In the regional geological context the area is represented by Archaean rocks (Paramirim Complex) and Paleoproterozoic rocks (Ibitiara granitoid and Matinos Granite) constituted the basement, following by paleo to mesozoic pluton-vulcanic-sedimentary association of Rio dos Remédios Group, intruded by mafic rocks. It was used geochemistry and petrographic analysis compiling to field works data to characterize the rocks where the gold mineralization is inserting. Previously these rocks were classifying in volcanic rocks of Novo Horizonte Formation. Developing this monograph’s work the petrogenetic characteristics suggesting that these rocks called volcanic actually belong to Ibitiara granitoid as a portion more metamorphosed. The green schist is the predominant metamorphism in the area with low deformation, associated to high concentration of fluid circulating. The hydrothermal alteration is the process responsible for rocks modifications and strong sericitization generalize

Estudo da influência do lineamento Tibagi e Sinclinal de Torres na estruturação da porção norte da bacia de Pelotas

The area of this work is located along the Northern portion of the Pelotas´s basin. The onshore region extends from the Southern portion São Paulo State to the North of Rio Grande do Sul State, with a total area of 440 530 km ². The objective of the research is to characterize the main geological structures of the outcropping basement in the Paraná Basin and its correlation with the offshore portion of the Pelotas Basin. The characterization was performed through the integration of surface (SRTM images and outcrops) and subsurface data (seismic data and well logs), the method includes the use of remote sensing techniques and seismic interpretation. The main structures to be analyzed are the Tibagi Lineament and the “Torres Syncline in order to verify its influence on the geological evolution and deformation of the basin. As result, it was identified the continuity of the both structures inside the offshore basin (Pelotas Basin); but only the Tibagi Lineament represents an important structural feature in the offshore basin. In this sense, the Tibagi lineament shows a NW-SE direction along the both basins (Pelotas and Paraná) and it is defined by drainages and relief on the continental portion. It was classified as a graben structure limited by normal faults and it also was verified a trend of faults inside the lineament that cuts all the sedimentary package of Itararé Group from Paraná Basin. The Torres syncline is a structure that connects the arches of Ponta Grossa and Rio Grande, showing NW-SE orientation and a low angle dip in the NW direction. Its projection into the Pelotas Basin was not recognized by the methods applied in this work, because a preliminary analyze indicates that its projection corresponds to a structural high inside the Pelotas Basin

Caracterização geológica da terminação norte do Domo de Ambrósio - Bahia

The Ambrósio dome is a granodioritic batholiths of elliptical geometry, 40km length in the N-S direction and variable width of up to 8 km, has a weakly deformed nucleus with intensely deformed margins, in its northern portion is intruded in orthogneiss that belong to the Archean basement, and its southern part comes in direct contact with the volcano-sedimentary sequence of Paleoproterozoic Rio Itapicuru Greenstone Belt (RIGB), Bahia. From geological mapping on 1:25:000 scale were recognized two structural domains, termed West Domain and East Domain. From investigation of these domains was identified a major shear zone, which puts in contact two distinct stratigraphic sequences, one west, consisting primarily of metavulcanic and metapyroclastic rocks with records of low-grade regional metamorphism, and east discontinuity a metassedimentary domain, with record of gradational contact metamorphism, deformation and compression generated from the rise of Ambrosio Pluton. Such records put into question the structural and stratigraphic models in the literature so far

Investigação sobre deformação neotectônica no lineamento Guapiara, região de Guapiara e Jacupiranga

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)