Anatomia das folhas, brácteas e escapos de Actinocephalus (Koern.) Sano (Eriocaulaceae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Morfo-anatomia de espécies de Blastocaulon Ruhland (Eriocaulaceae)

Estudou-se a morfo-anatomia das raízes, caules, escapos e folhas de Blastocaulon albidum, B. prostratum e B. scirpeum, que ocorrem nos campos rupestres de Minas Gerais, Brasil. Verificou-se que as espécies apresentam raízes muito finas com epiderme unisseriada, duas-três camadas de células do parênquima cortical e tecidos vasculares com poucos elementos. Os caules em B. albidum e B. prostratum são aéreos, prostrados, ramificados, enquanto em B. scirpeum alguns indivíduos apresentam rizoma ou caules muito curtos. Constituem-se de epiderme, córtex e cilindro vascular. As folhas são delicadas, com células da epiderme com paredes finas, parênquima clorofiliano frouxo e reduzido número de feixes vasculares colaterais. Os escapos são cilíndricos, finos, não formam costelas e possuem apenas quatro feixes vasculares colaterais. As características observadas nessas espécies estudadas são típicas de plantas que ocorrem em locais úmidos e sombreados, ambientes onde é encontrada a maioria das espécies de Blastocaulon e ainda caracterizam anatomicamente o gênero, que se diferencia de Paepalanthus.

Anatomia de algumas espécies aquáticas de Eriocaulaceae brasileiras

Estudou-se a anatomia de raízes, caules, folhas e escapos de Eriocaulon elichrysoides, Leiothrix fluitans, Paepalanthus obtusifolius, Philodice hoffmannseggii, Syngonanthus caulescens e Tonina fluviatilis,espécies aquáticas de Eriocaulaceae que ocorrem em diferentes ecossistemas brasileiros, visando a caracterização anatômica das mesmas e também a interpretação das adaptações ao ambiente. Essas plantas caracterizam-se por apresentarem raízes com aspecto esponjoso e esbranquiçado; acúmulo de ar no córtex; epiderme unisseriada, de paredes finas; córtex externo, mediano e interno; endoderme unisseriada e periciclo unisseriado ou multisseriado. em L. fluitans, P. obtusifolius e T. fluviatilis foram observadas raízes absorventes com aerênquima e raízes fixadoras sem aerênquima. Caules aéreos ou rizomatosos, com ou sem espessamentos causados pelo periciclo. Folhas e escapos com células epidérmicas de paredes finas, estômatos somente na face abaxial, parênquima clorofiliano frouxo, tecido de sustentação pouco desenvolvido e feixes vasculares colaterais. Essas estruturas anatômicas são típicas de plantas de ambientes úmidos ou aquáticos, e ocorrem de forma convergente em diferentes gêneros de Eriocaulaceae.

Prevalência de fatores de risco para doenças cardiovasculares entre escolares em Londrina - PR: diferenças entre classes econômicas

OBJETIVO: Avaliar e comparar a prevalência de fatores de riscos cardiovasculares em adolescentes escolares de diferentes classes econômicas. MÉTODOS: Foram avaliados 1.021 adolescentes. Os indivíduos foram pesados e tiveram sua altura e circunferência abdominal medidos, além da sua pressão arterial aferida. A prática de atividade física e condição socioeconômica foram relatadas. Os resultados foram avaliados pela utilização da frequência das variáveis e pelo teste do qui-quadrado. RESULTADOS: Observou-se menor prevalência de sedentarismo (p < 0,001) e maiores prevalências de obesidade abdominal (p = 0,038) e de sobrepeso (p = 0,010) entre adolescentes da classe econômica alta. Não houve diferença de prevalência de pressão arterial elevada entre adolescentes da classe econômica baixa e alta. Quando os fatores de risco cardiovasculares foram agregados, a prevalência também foi maior na classe econômica alta para um ou dois fatores de risco. CONCLUSÃO: Com exceção do sedentarismo e da pressão arterial elevada, a prevalência de fatores de risco para doenças cardiovasculares foi maior na classe econômica alta.

Thermally activated dynamics in La2CuO4+delta: tilts of the CuO6 octahedra and interstitial O

An intense peak of the elastic energy loss versus temperature is found in La2CuO4 at 150 K (in the LTO phase), at a vibration frequency of similar to 280 Hz. From the dependence of the dissipation curve on frequency it is deduced that the relaxation rate has an activation enthalpy of 0.23 eV. The peak is ascribed to a thermally activated dynamics of the tilts of the CuO6 octahedra which form the La2CuO4 lattice, a fraction of which are supposed to be able to switch between energetically equivalent configurations. The peak is suppressed by interstitial O; this is explained by supposing that each interstitial atom can block several octahedra into a configuration that can accommodate the distortion due to its presence. Increasing the content of excess O, two new thermally activated processes develop, attributed to the hopping of interstitial O atoms which are isolated and which are paired or otherwise aggregated. The activation enthalpy for the diffusion of O at low values of 6 is 0.48 eV.

Localization of the optimal solution and a posteriori bounds for aggregation

After an aggregated problem has been solved, it is often desirable to estimate the accuracy loss due to the fact that a simpler problem than the original one has been solved. One way of measuring this loss in accuracy is the difference in objective function values. To get the bounds for this difference, Zipkin (Operations Research 1980;28:406) has assumed, that a simple (knapsack-type) localization of an original optimal solution is known. Since then various extensions of Zipkin's bound have been proposed, but under the same assumption. A method to compute the bounds for variable aggregation for convex problems, based on general localization of the original solution is proposed. For some classes of the original problem it is shown how to construct the localization. Examples are given to illustrate the main constructions and a small numerical study is presented.

Aggregation in the generalized transportation problem

Aggregation disaggregation is used to reduce the analysis of a large generalized transportation problem to a smaller one. Bounds for the actual difference between the aggregated objective and the original optimal value are used to quantify the error due to aggregation and estimate the quality of the aggregation. The bounds can be calculated either before optimization of the aggregated problem (a priori) or after (a posteriori). Both types of the bounds are derived and numerically compared. A computational experiment was designed to (a) study the correlation between the bounds and the actual error and (b) quantify the difference of the error bounds from the actual error. The experiment shows a significant correlation between some a priori bounds, the a posteriori bounds and the actual error. These preliminary results indicate that calculating the a priori error bound is a useful strategy to select the appropriate aggregation level, since the a priori bound varies in the same way that the actual error does. After the aggregated problem has been selected and optimized, the a posteriori bound provides a good quantitative measure for the error due to aggregation.

Speedup and scalability analysis of Master-Slave applications on large heterogeneous clusters

Although cluster environments have an enormous potential processing power, real applications that take advantage of this power remain an elusive goal. This is due, in part, to the lack of understanding about the characteristics of the applications best suited for these environments. This paper focuses on Master/Slave applications for large heterogeneous clusters. It defines application, cluster and execution models to derive an analytic expression for the execution time. It defines speedup and derives speedup bounds based on the inherent parallelism of the application and the aggregated computing power of the cluster. The paper derives an analytical expression for efficiency and uses it to define scalability of the algorithm-cluster combination based on the isoefficiency metric. Furthermore, the paper establishes necessary and sufficient conditions for an algorithm-cluster combination to be scalable which are easy to verify and use in practice. Finally, it covers the impact of network contention as the number of processors grow. (C) 2007 Elsevier B.V. All rights reserved.

A study of habitat fragmentation in Southeastern Brazil using remote sensing and geographic information systems (GIS)

The purpose of this work was to study fragmentation of forest formations (mesophytic forest, riparian woodland and savannah vegetation (cerrado)) in a 15,774-ha study area located in the Municipal District of Botucatu in Southeastern Brazil (São Paulo State). A land use and land cover map was made from a color composition of a Landsat-5 thematic mapper (TM) image. The edge effect caused by habitat fragmentation was assessed by overlaying, on a geographic information system (GIS), the land use and land cover data with the spectral ratio. The degree of habitat fragmentation was analyzed by deriving: 1. mean patch area and perimeter; 2. patch number and density; 3. perimeter-area ratio, fractal dimension (D), and shape diversity index (SI); and 4. distance between patches and dispersion index (R). In addition, the following relationships were modeled: 1. distribution of natural vegetation patch sizes; 2. perimeter-area relationship and the number and area of natural vegetation patches; 3. edge effect caused by habitat fragmentation, the values of R indicated that savannah patches (R = 0.86) were aggregated while patches of natural vegetation as a whole (R = 1.02) were randomly dispersed in the landscape. There was a high frequency of small patches in the landscape whereas large patches were rare. In the perimeter-area relationship, there was no sign of scale distinction in the patch shapes, In the patch number-landscape area relationship, D, though apparently scale-dependent, tends to be constant as area increases. This phenomenon was correlated with the tendency to reach a constant density as the working scale was increased, on the edge effect analysis, the edge-center distance was properly estimated by a model in which the edge-center distance was considered a function of the to;al patch area and the SI. (C) 1997 Elsevier B.V. B.V.

A new species and expanded distributions of freshwater Audouinella (Acrochaetiaceae, Rhodophyta) from Central Mexico and south-eastern Brazil

Eighteen collections of red-coloured Audouinella from Central Mexico and southeastern Brazil detected three species. The most common species, A. eugenea, is characterized by macroscopic thalli, the erect system consisting of filaments with cylindrical cells, undifferentiated into proximal and distal parts, and relatively large monosporangia (greater than or equal to 12.0 mum long). Spermatangia. and possible propagules were observed in some Mexican populations. This is the third Audouinella species observed to have gametangia and the first member of the Acrochaetiales with putative propagules. The second species, from Central Mexico, was characterized by the following features: macroscopic thalli, the erect system differentiated into proximal parts with cylindrical cells, unbranched or rarely branched, and distal parts with barrel-shaped cells, abundantly branched to form dense fascicles, with alternate or dichotomous branching, some at right-angles to the axis, and relatively large monosporangia (greater than or equal to 12.0 mum long). The morphologically distinct proximal and distal portions of the erect system, the latter forming dense fascicles, was a consistent character so far unknown in Audouinella; thus, we propose a new species, A. huastecana sp. nov. The third species is a microscopic epiphyte, A. meiospora, with a well-developed prostrate system composed of creeping and loosely aggregated filaments, and a short homogeneous erect system (less than or equal to 15 cells) of filaments with cylindrical or barrel-shaped cells and small monosporangia (less than or equal to 13.0 mum long). A. eugenea and A. meiospora are characterized for the first time from the Southern and Northern Hemispheres, respectively, both occurring mostly in areas of tropical or subtropical rainforests. A. meiospora is reported from new macroalgal hosts. A. eugenea and A. huastecana tended to occur in warm, alkaline waters with a high ion content that were moderate to fast flowing, whereas A. meiospora was not associated with particular habitats.

Anatomy of Brazilian Eriocaulaceae: correlation with taxonomy and habitat using multivariate analyses

In this study we present a survey on vegetative anatomy in species of Actinocephalus, Blastocaulon, Eriocaulon, Leiothrix, Paepalanthus, Philodice, Syngonanthus, and Tonina (Eriocaulaceae). Multivariate analyses were used to correlate anatomical characters to taxa and the habitats where the species occur. Root and stem anatomical characters seem to be more affected by environmental factors where these species occur, and seem of little value for delimiting major taxonomic groups within the family. Other characters in the leaves, such as epidermis with thickened wall cells, compartmented substomatal chambers, mesophyll with hypodermis, compact chlorenchyma, collenchymatous bundle sheath extensions, and numerous vascular bundles, were shown to be important for defining species clusters in Leiothrix, Syngonanthus, and Paepalanthus subg. Platycaulon. Similarly, loosely aggregated chlorenchyma caused Blastocaulon, Eriocaulon, Philodice, Syngonanthus sect. Carpocephalus, S. sect. Syngonanthus, and Tonina, genera from humid environments, to cluster. Scape characters appear to be more informative in discriminating groups. This situation probably reflects lower selection pressures determining anatomical characters of this organ.

Structural and functional characterization of myotoxin I, a Lys49 phospholipase A(2) homologue from Bothrops moojeni (Caissaca) snake venom

Myotoxin-I (MjTX-I) was purified to homogeneity from the venom of Bothrops moojeni by ion-exchange chromatography on CM-Sepharose. Its molecular weight, estimated by SDS-PAGE, was 13,400 (reduced) or 26,000 (unreduced). The extinction coefficient (E-1.0 cm(1.0 mg/ml)) of MjTX-I was 1.145 at lambda = 278 nm, pH 7.0, and its isoelectric point was 8.2 at ionic strength mu = 0.1. When lyophilized and stored at 4 degrees C, dimeric, trimeric, and pentameric forms of the protein were identified by SDS-PAGE. This heterogeneous sample could be separated into three fractions by gel filtration on Sephadex 6-50. The fractions were analyzed by isoelectric focusing, immunoelectrophoresis, and amino acid composition, which indicated that heterogeneity was the result of different levels of self-association. Protein sequencing indicated that MjTX-I is a Lys49 myotoxin and consists of 121 amino acids (M-r = 13,669), containing a high proportion of basic and hydrophobic residues. It shares a high degree of sequence identity with other Lys49 PLA(2)-like myotoxins, but shows a significantly lower identity with catalytically active Asp49 PLA(2)s. The three-dimensional structure of MjTX-I was modeled based on the crystal structures of three highly homologous Lys49 PLA(2)-like myotoxins. This model showed that the amino acid substitutions are conservative, and mainly the beta-wing region, and the C-terminal extended random coil. MjTX-I displays local myotoxic and edema-inducing activities in mice, and is lethal by intraperitoneal injection, with an LD50 value of 8.5 +/- 0.8 mg/kg, In addition, it is cytotoxic to myoblasts/ myotubes in culture, and disrupts negatively charged liposomes. In comparison with the freshly prepared dimeric sample, the more aggregated forms showed significantly reduced myotoxic activity. However, the edema-inducing activity of MjTX-I was independent of molecular association. Phospholipase A(2) activity on egg yolk, as well as anticoagulant activity, were undetectable both in the native and in the more associated forms. His, Tyr, and Trp residues of the toxin were chemically modified by specific reagents. Although the myotoxic and lethal activities of the modified toxins were reduced by these treatments, neither its edema-inducing or Liposome-disrupting activities were significantly altered. Rabbit antibodies to native MjTX-I cross-reacted with the chemically modified forms, and both the native and modified MjTX-I preparations were recognized by antibodies against the C-terminal region 115-129 of myotoxin II from B. asper, a highly Lys49 PLA(2)-homologue with high sequencial similarity. (C) 2000 Academic Press.

Aggregation-based decomposition for multi-divisional models

The aggregation theory of mathematical programming is used to study decentralization in convex programming models. A two-level organization is considered and a aggregation-disaggregation scheme is applied to such a divisionally organized enterprise. In contrast to the known aggregation techniques, where the decision variables/production planes are aggregated, it is proposed to aggregate resources allocated by the central planning department among the divisions. This approach results in a decomposition procedure, in which the central unit has no optimization problem to solve and should only average local information provided by the divisions.

High hydrostatic pressure processing on microstructure of probiotic low-fat yogurt

The effect of milk processing on the microstructure of probiotic low-fat yogurt was studied. Skim milk fortified with skim milk powder was subjected to three treatments prior to innoculation: thermal treatment at 85 degrees C for 30 min, high hydrostatic pressure at 676 MPa for 5 min, and combined treatments of high hydrostatic pressure (HHP) and heat. The processed milk was then fermented by using two different starter cultures containing Streptococcus thermophilus, Lactobacillus delbrueckii ssp. bulgaricus, Lactobacillus acidophilus, and Bifidobacterium longum. The microstructure of heat-treated milk yogurt had fewer interconnected chains of irregularly shaped casein micelles, forming a network that enclosed the void spaces. on the other hand, microstructure of HHP yogurt had more interconnected clusters of densely aggregated protein of reduced particle size, with an appearance more spherical in shape, exhibiting a smoother more regular surface and presenting more uniform size distribution. The combined HHP and heat milk treatments led to compact yogurt gels with increasingly larger casein micelle clusters interspaced by void spaces, and exhibited a high degree of cross-linking. The rounded micelles tended to fuse and form small irregular aggregates in association with clumps of dense amorphous material, which resulted in improved gel texture and viscosity. (C) 2007 Elsevier Ltd. All rights reserved.

Structural Refinement and Photoluminescence Properties of MnWO4 Nanorods Obtained by Microwave-Hydrothermal Synthesis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)