Effect of dentin conditioning time on nanoleakage

Objectives: To study the nanoleakage pattern in the dentin hybrid layer by using different dentin adhesives. The null hypotheses tested in this study were: 1) dentin conditioning time does not affect nanoleakage within the hybrid layer; 2) the type of dentin adhesive used does not affect nanoleakage. Methods: Standardized Class V cavities were prepared in 30 intact human molars on the buccal and lingual surfaces. The specimens were randomly assigned to 2 total-etch dentin adhesives (OptiBond SOLO Plus [OPS, Kerr] and One-Step [ONS, BISCO Inc]) and 2 self-etch dentin adhesives (Clearfil SE Bond [CSE, Kuraray] and Adper Prompt L-Pop [APL, 3M ESPE]). The specimens were etched or conditioned for 15 seconds, 30 seconds or 60 seconds. Upon restoration of the Class V cavities with the proprietary resin composite, the specimens were isolated with nail polish except for a 2.0-mm rim around the restoration, and they were immersed in 50 wt% ammoniacal silver nitrate solution (pH=9.5) for 24 hours followed by 8 hours of immersion in photo-developing solution to reduce the silver ions to metallic silver. The specimens were fixed, dehydrated and processed for FESEM and TEM. Silver penetration was measured along the cervical wall, and data were analyzed with Kruskal-Wallis non-parametric tests at a significance level of 95%. Results: There were no statistically significant differences among the experimental groups for the factor conditioning time (p>0.926). There were significant differences for the variable dentin adhesive (p<0.0001). The least amount of nanoleakage within the hybrid layer occurred with CSE, while ONS resulted in the greatest penetration of silver ions. The adhesives OPS and APL ranked in the intermediary subset. Under TEM, all adhesives resulted in some degree of nanoleakage within the hybrid layer. Both spotted/reticular and water-tree nanoleakage patterns were observed. Significance: Longer conditioning times did not increase nanoleakage within the hybrid layer. Nanoleakage varied with the type of adhesive used.

Conditioning of stress in Nile tilapia

A Pavlovian conditioning paradigm was used to induce a connection between a conditioned stimulus, light (CS), associated with an unconditioned stimulus, confinement (US) in Nile tilapia Oreochromis niloticus, which resulted in a conditioned endocrine response (CR) to the CS alone manifested as an increase in plasma cortisol. Individual isolated Nile tilapia were submitted for 10 days to the conditioning treatment consisting of turning on a light (CS) for I min with subsequent 30 min confinement (US). on the 10th day of the experiment, plasma cortisol was not increased when fish were subjected to no handling at all, or only light, or even a daily stressor for the 9 days. on the other hand, at the 10th day cortisol was significantly increased only when light was presented either with or without pairing with the stressor. These results confirmed that the cue, light (CS), was not stressful in itself, but when given as the CS in the absence of the US post conditioning the hypothalamus-pituitary-interrenal axis was activated. Therefore, it was concluded that memory of a previous experience with a stressor can be recalled by a conditioned stimulus and induce stress, which is the first demonstration of a memory-induced stress in fishes. (C) 2004 the Fisheries Society of the British Isles.

Evaluating feeding as unconditioned stimulus for conditioning of an endocrine effect in Nile tilapia

This study tested the adequacy of feeding as an unconditioned stimulus (US) to condition an endocrine response (plasma cortisol increase) in the cichlid fish Nile tilapia (Oreochromis niloticus). In a first study, conditioning was confirmed in grouped fish in the only experiment using single-held Nile tilapia. In this test a conditioned stimulus (CS - aeration off) was associated with a stressor (air emersion for 2 min - US). We then assessed whether several events of paired CS-US resulted in a conditioned endocrine response (CR), in this case an increase in plasma cortisol after presentation of the CS only. Before testing feeding as US, the postprandial or social holding condition for feeding effects on cortisol levels was tested. Nile tilapia showed increased cortisol after feeding associated to social context (grouped fish), but not to food only (single-held fish). In a third study, feeding was tested as US in an experiment similar to the first study but an increase in feeding-induced cortisol could not be conditioned. The absence of CR suggests that the stressor affects acquisition of this response, which may be a consequence of stimulus intensity or biological relevance. This study expands the recently reported Pavlovian conditioning paradigm for endocrine response in fish. (C) 2007 Elsevier B.V. All rights reserved.

Effect of Conditioning on the Production of Inulinase by Kluyveromyces marxianus var. bulgaricus through Fed-Batch Fermentation

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Maximum entropy, fractal dimension and lacunarity in quantification of cellular rejection in myocardial biopsy of patients submitted to heart transplantation

This paper presents a method for the quantification of cellular rejection in endomyocardial biopsies of patients submitted to heart transplant. The model is based on automatic multilevel thresholding, which employs histogram quantification techniques, histogram slope percentage analysis and the calculation of maximum entropy. The structures were quantified with the aid of the multi-scale fractal dimension and lacunarity for the identification of behavior patterns in myocardial cellular rejection in order to determine the most adequate treatment for each case.

Presence of Candida spp. in the oral cavity of heart transplantation patients

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of conditioning methods on the microtensile bond strength of phosphate monomer-based cement on zirconia ceramic in dry and aged conditions

The objective of this study was to evaluate the durability of bond strength between a resin cement and aluminous ceramic submitted to various surface conditioning methods. Twenty-four blocks (5 X 5 X 4 mm 3) of a glass-in filtrated zirconia-alumina ceramic (inCeram Zirconia Classic) were randomly divided into three surface treatment groups: ST1-Air-abrasion with 110-mu m Al2O3 particles + silanization; ST2-Laboratory tribochemical silica coating method (110-mu m Al2O3, ilO-PM Silica) (Rocatec) + silanization; ST3-Chairside tribochemical silica coating method (30-mu m SiOx) (CoJet) + silanization. Each treated ceramic block was placed in its silicone mold with the treated surface exposed. The resin cement (Panavia F) was prepared and injected into the mold over the treated surface. Specimens were sectioned to achieve nontrimmed bar specimens (14 sp/block) that were randomly divided into two conditions: (a) Dry-microtensile test after sectioning; (b) Thermocycling (TC)-(6,000X, 5-55 degrees C) and water storage (150 days). Thus, six experimental groups were obtained (11 = 50): Gr1-ST1 + dry; Gr2-ST1 + TC. Gr3-ST2 + dry; Gr4-ST2 + TC; Gr5-ST3 + dry; Gr6ST3 + TC. After microtensile testing, the failure types were noted. ST2 (25.1 +/- 11) and ST3 (24.1 +/- 7.4) presented statistically higher bond strength (MPa) than that of STI (17.5 +/- 8) regardless of aging conditions (p < 0.0001). While Gr2 revealed the lowest results (13.3 +/- 6.4), the other groups (21.7 +/- 7.4-25. 9 +/- 9.1) showed statistically no significant differences (two-way ANOVA and Tukey's test, a 0.05). The majority of the failures were mixed (82%) followed by adhesive failures (18%). Gr2 presented significantly higher incidence of ADHESIVE failures (54%) than those of other groups (p = 0.0001). Both laboratory and chairside silica coating plus silanization showed durable bond strength. After aging, airabrasion with 110-mu m Al2O3 + silanization showed the largest decrease indicating that aging is fundamental for bond strength testing for acid-resistant Arconia ceramics in order to estimate their long-term performance in the mouth. (c) 2007 Wiley Periodicals, Inc.

INFLUENCE of DIFFERENT SURFACE CONDITIONING PROTOCOLS on MICROTENSILE BOND STRENGTH of SELF-ADHESIVE RESIN CEMENTS TO DENTIN

Statement of problem. According to manufacturers, bonding with self-adhesive resin cements can be achieved without any pretreatment steps such as etching, priming, or bonding. However, the benefit of saving time with these simplified luting systems may be realized at the expense of compromising the bonding capacity.Purpose. The purpose of this study was to assess whether different dentin conditioning protocols influence the bond performance of self-adhesive resin cements to dentin.Material and methods. Flat dentin surfaces from 48 human molars were divided into 4 groups (n=12): 1) control, no conditioning; 2) H(3)PO(4), etching with 37% H(3)PO(4) for 15 seconds; 3) SEBond, bonding with self-etching primer adhesive (Clearfil SE Bond); and 4) EDTA, etching with 0.1M EDTA for 60 seconds. The specimens from each dentin pre-treatment were bonded using the self-adhesive cements RelyX Unicem, Maxcem or Multilink Sprint (n=4). The resin-cement-dentin specimens were stored in water at 37 degrees C for 7 days, and serially sectioned to produce beam specimens of 1.0 mm(2) cross-sectional area. Microtensile bond strength (mu TBS) testing was performed at 1.0 mm/min. Data (MPa) were analyzed by 2-way ANOVA and Tukey multiple comparisons test (alpha=.05). Fractured specimens were examined with a stereomicroscope (x40) and classified as adhesive, mixed, or cohesive. Additional bonded interfaces were evaluated under a scanning electron microscope (SEM).Results. Cement-dentin mu TBS was affected by the dentin conditioning approach (P <.001). RelyX Unicem attained statistically similar bond strengths to all pre-treated dentin surfaces. H(3)PO(4)-etching prior to the application of Maxcem resulted in bond strength values that were significantly higher than the other groups. The lowest mu TBS were attained when luting Multilink Sprint per manufacturers' recommendations, while H(3)PO(4)-etching produced the highest values followed by Clearfil SE bonding and EDTA. SEM observations disclosed an enhanced potential of the self-adhesive cements to form a hybrid layer when applied following manufacturer's instructions.Conclusions. When evaluated self-adhesive resin cements are used, selectively etching dentin with H(3)PO(4) prior to luting results in the most effective bonding. (J Prosthet Dent 2011;105:227-235)

Resin Bonding to a Feldspar Ceramic After Different Ceramic Surface Conditioning Methods: Evaluation of Contact Angle, Surface pH, and Microtensile Bond Strength Durability

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O transplante de células-tronco hematopoéticas como opção no tratamento de doenças não hematológicas

Nesta revisão são abordadas as doenças em que existem dados e perspectivas do uso de transplante de células-tronco hematopoéticas em suas diversas modalidades. São apresentados também os aspectos referentes aos regimes de condicionamento empregados, e sua relação com toxicidade e taxa de mortalidade ligadas ao transplante. São apresentadas as doenças autoimunes e particularizados dados específicos do lúpus eritematoso sistêmico, esclerose sistêmica e esclerose múltipla e diabetes mellitus tipo 1. A base do procedimento nas doenças autoimunes é a reprogramação imunológica. Aparentemente o procedimento tem sua indicação nas doenças em que os tratamentos convencionais de imunossupressão tenham falhado, e o dano orgânico não tenha sido definitivo, mas tenha chance de ocorrer caso não seja realizado o transplante. A modalidade aparentemente indicada no momento deve ser o transplante de células-tronco autogênico com regimes de condicionamento não mieloablativo para se obter sobrevivência estimada em mais de 50% em todas as doenças, com baixa toxicidade e com mortalidade nula ligada ao transplante. São apresentados também os resultados nos tumores sólidos, que são discutíveis, e particularidades no câncer de mama. A aparente indicação para os tumores sólidos é transplante de células-tronco alogênico e se baseia no tratamento intensivo com doses mieloablativas com a finalidade de se induzir o efeito enxerto contra o tumor. Os regimes não mieloablativos são preconizados com a finalidade de redução da toxicidade e indução de imunossupressão, sendo os dados insuficientes e discutíveis, o que obriga a introdução de novas estratégias terapêuticas baseadas na terapia imune e celular.

Microbiological profile of donor corneas stored for tectonic transplantation purposes in rabbits

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Complete atrioventricular block during renal transplantation in a patient with Alport's syndrome: case report

CONTEXTO: A síndrome de Alport é responsável por aproximadamente 5% dos pacientes com insuficiência renal crônica. Nessa doença, anormalidades no sistema de condução cardíaco são mais freqüentes que na população em geral. OBJETIVO: Relatar caso de síndrome de Alport que desenvolveu bloqueio atrioventricular total durante um transplante renal. RELATO DE CASO: Paciente masculino, 21 anos de idade, com insuficiência renal crônica secundária à síndrome de Alport, foi submetido a transplante renal sob anestesia peridural. Durante o procedimento anestésico-cirúrgico apresentou bloqueio atrioventricular total, que foi tratado rapidamente, e com sucesso, usando-se um marcapasso transcutâneo. O bloqueio simpático extenso pode contribuir para o desenvolvimento de distúrbios no sistema de condução cardíaco, particularmente em pacientes com insuficiência renal crônica em esquema de diálise. Mesmo em pacientes com eletrocardiograma pré-operatório normal e sem distúrbios de condução, graus variáveis de bloqueio atrioventricular, incluindo bloqueio atrioventricular total, podem ocorrer. Nesse caso, o uso de marcapasso transcutâneo é tratamento rápido e efetivo na sala de operação até o final da cirurgia, quando o tratamento definitivo pode ser planejado.

EFFECTS OF CYCLOSPORINE-A IMMUNOSUPPRESSION ON PANCREATICODUODENAL TRANSPLANTATION IN ALLOXAN-DIABETIC RATS

1. Forty-five outbred Wistar rats were randomly assigned to three experimental groups: GI, 10 non-diabetic control rats; GII, 10 alloxan-diabetic control rats; GIII, 25 alloxan-diabetic tats which received pancreaticoduodenal transplantation (PDT) from normal Wistar donor rats and were immunosuppressed with cyclosporin A (Cy-A), 10 mg kg body weight-1 day-1, administered intraperitoneally for 30 days.2. In parallel, 15 alloxan-diabetic inbred Wistar rats received isogeneic PDT from normal Wistar donor rats.3. Cy-A prevented graft rejection in the 15 surviving animals in group III. These observations were confirmed by clinical and biochemical parameters (body weight, urine output, water and food intake, blood and urinary glucose and plasma insulin) and by histology and immunohistochemistry of the pancreas.4. However, Cy-A was associated with 60% of the infectious complications in transplanted rats leading to 40% mortality. Pulmonary infections were the main cause of death. There were no side effects of immunosuppression on the pancreas. Infections were not significant in inbred rats submitted to PDT.

Criteria for peanut seed pre-conditioning for the tetrazolium test

The staining pattern of peanut (Arachis hypogaea L.) seeds with a tetrazolium solution was evaluated to determine the adequate conditions of seed quality evaluations. Three seed lots with different vigour levels and similar moisture content were pre-conditioned using the combination of five periods of time (4, 8, 12, 16 and 20 hours) and four temperatures (20, 25, 30 and 35 degrees C) and then exposed to a 1.0% tetrazolium solution for three hours. The moisture content levels of seeds conditioned for 8 hours at the temperatures of 25, 30 or 35 degrees C, for 12 hours at 20 or 25 degrees C and for 16 hours at 20 degrees C, were above 30%. In this range of moisture level, the staining in tetrazolium was clear and uniform, reflecting an appropriate conditioning of the seeds. However, under a practical point of view, the period of 16 hours at 20 degrees C showed to be the best option, since it allows to start the pre-conditioning an late afternoon of one day and submit the seeds for staining in the following morning.