Estudo radiográfico de terceiros molares inferiores retidos e parcialmente irrompidos e revisão de literatuda

Introduction: Pathology associated with retained or partially erupted teeth are common in the general population. Objective: the aim was to evaluate the measurement of pericoronal space of retained third molars and partially erupted teeth in panoramic radiographs. Method: a retrospective study was carried on on the frequency of tooth retention and the problems it can cause in 107 radiographs of patients where the width was measured to verify the presence or absence of diseases associated with the involved teeth. Results: in the 107 panoramic radiographs analyzed the most frequent measurement was of 1.0 mm with 32.71% of cases followed by 2.0 mm with 29.91% of cases. Conclusion: The measurement of the pericoronal sapce of retained third molars and partially retained through its greatest width is in a practical and effective technique for application in routine clinical practice, which suggests the presence or absence of eraly odontogenic pathology

Granuloma periférico de células gigantes: relato de caso

The peripheral giant cell granuloma (GPCG) is defined as a benign disorder of uncertain etiopathogenesis and proliferative reaction of the fibrous connective tissue or periosteum, which is characterized histologically by the presence of multinucleated giant cells. The purpose of this study is to report a case of GPCG in a 56-year-old white woman presenting a bleeding nodule on palpation, a red color with small whitish ulcerated areas, defined limits, resilient consistency, a pedicled base 2.0 cm in diameter, asymptomatic, involving the permanent lower left third molar, which presented mobility. Radiographically there was significant bone loss in this tooth region, whose initial diagnosis was pyogenic granuloma. The definitive diagnosis was obtained after excisional biopsy the microscopic examination of which identified the presence of multinucleated giant cells. The clinical postoperative follow-up revealed a favorable cicatricial repair of the operated area with no recurrence after 9 months of monitoring.

Granuloma Periférico de Células Gigantes: Relato de caso com acompanhamento de 2 anos

The peripheral giant cell granuloma (GPCG) is defined as a benign disorder of uncertain etiopathogenesis, and proliferative reaction of the fibrous connective tissue or the periosteum, which is characterized histologically by the presence of multinucleated giant cells. The purpose of this study is report a case of GPCG in a white women, with 56 years old, presenting nodule bleeding to the touch, red and white with small ulcerated areas, defined limits, resilient consistency, pedicled base with 2.0 cm diameter, asymptomatic, involving the permanent lower left third molar, that it was presented with mobility. Radiographically there was significant bone loss in this tooth region, whose initial diagnosis was pyogenic granuloma. The definitive diagnosis was obtained after excisional biopsy in which microscopic examination it was identified e presence of multinucleated giant cells. The clinical postoperative presented favorable cicatricial repairing of the operated area without recurrence after two years of monitoring.

Effect of Arnica montana 6 cH on edema, mouth opening and pain in patients submitted to extraction of impacted third molars

This study had the objective to evaluate the homeopathic action of Arnica montana 6 cH and placebo on edema, mouth opening (trismus) and pain in patients submitted to extraction of bilaterally impacted lower third molars. The experiment was carried out as a crossover and double-blind study. The data showed that edema was significantly reduced by the treatment with Arnica montana 6 cH (p<0.05) and did not demonstrate significant effect on trismus and pain as compared to control group.

Cone-beam computed tomography analysis of the apical third of curved roots after mechanical preparation with different automated systems

The present study evaluated by cone-beam computed tomography (CBCT) the apical canal transportation and centralizing ability of different automated systems after root canal preparation. The mesiobuccal canals of maxillary first molars (n=10 per group) were prepared with: GI - reciprocating system with K-Flexofile; GII - reciprocating system with NiTiFlex files; GIII - rotary system with K3 instruments; GIV - rotary system with RaCe instruments. CBCT scans were taken before and after biomechanical preparation up to a #40.02 diameter. Canal transportation was determined by measuring the smallest distance between the inner canal walls and the mesial and distal sides of the root. The centralization ability corresponded to the difference between the measurements from transportation evaluation, using the linear voxel to voxel method of analysis. The mean transportation was 0.06 ± 0.14 mm, with a tendency to deviate to the mesial side of the root (n=22), with no statistically significant difference among the groups (p=0.4153). The mean centralization index was 0.15 ± 0.65 also without statistically significant difference among the groups (p=0.0881). It may be concluded that apical canal transportation and centralization ability were not influenced by the type of mechanical movement and instruments used.

In vitro study of shear bond strength in direct bonding of orthodontic molar tubes

Objective: Although direct bonding takes up less clinical time and ensures increased preservation of gingival health, the banding of molar teeth is still widespread nowadays. It would therefore be convenient to devise methods capable of increasing the efficiency of this procedure, notably for teeth subjected to substantial masticatory impact, such as molars. This study was conducted with the purpose of evaluating whether direct bonding would benefit from the application of an additional layer of resin to the occlusal surfaces of the tube/tooth interface. Methods: A sample of 40 mandibular third molars was selected and randomly divided into two groups: Group 1 - Conventional direct bonding, followed by the application of a layer of resin to the occlusal surfaces of the tube/tooth interface, and Group 2 - Conventional direct bonding. Shear bond strength was tested 24 hours after bonding with the aid of a universal testing machine operating at a speed of 0.5mm/min. The results were analyzed using the independent t-test. Results: The shear bond strength tests yielded the following mean values: 17.08 MPa for Group 1 and 12.60 MPa for Group 2. Group 1 showed higher statistically significant shear bond strength than Group 2. Conclusions: The application of an additional layer of resin to the occlusal surfaces of the tube/tooth interface was found to enhance bond strength quality of orthodontic buccal tubes bonded directly to molar teeth.

Hipomineralização molar incisivo em escolares de Botelhos, Minas Gerais, Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

O efeito da carga oclusal no processo de reparo do ligamento periodontal após reimplante imediato em molar de ratos: avaliação histológica e imunoistoquímica

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of the rotary and/or oscillatory reciprocating systems in the morphological changes of narrow and curved molar root canals anatomy

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Third eyelid gland protrusion in dogs: an experimental model proposal

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Canine lacrimal and third eyelid superficial glands macroscopic and morphometric characteristics

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

RINEX_HO: second- and third-order ionospheric corrections for RINEX observation files

When GNSS receivers capable of collecting dual-frequency data are available, it is possible to eliminate the first-order ionospheric effect in the data processing through the ionosphere-free linear combination. However, the second- and third-order ionospheric effects still remain. The first-, second- and third-order ionospheric effects are directly proportional to the total electron content (TEC), although the second- and third-order effects are influenced, respectively, by the geomagnetic field and the maximum electron density. In recent years, the international scientific community has given more attention to these kinds of effects and some works have shown that for high precision GNSS positioning these effects have to be taken into consideration. We present a software tool called RINEX_HO that was developed to correct GPS observables for second- and third-order ionosphere effects. RINEX_HO requires as input a RINEX observation file, then computes the second- and third-order ionospheric effects, and applies the corrections to the original GPS observables, creating a corrected RINEX file. The mathematical models implemented to compute these effects are presented, as well as the transformations involving the earth's magnetic field. The use of TEC from global ionospheric maps and TEC calculated from raw pseudorange measurements or pseudoranges smoothed by phase is also investigated.

Second and Third Order Ionospheric Effects on GNSS Positioning: A Case Study in Brazil

The Global Positioning System (GPS) transmits signals in two frequencies. It allows the correction of the first order ionospheric effect by using the ionosphere free combination. However, the second and third order ionospheric effects, which combined may cause errors of the order of centimeters in the GPS measurements, still remain. In this paper the second and third order ionospheric effects, which were taken into account in the GPS data processing in the Brazilian region, were investigated. The corrected and not corrected GPS data from these effects were processed in the relative and precise point positioning (PPP) approaches, respectively, using Bernese V5.0 software and the PPP software (GPSPPP) from NRCAN (Natural Resources Canada). The second and third order corrections were applied in the GPS data using an in-house software that is capable of reading a RINEX file and applying the corrections to the GPS observables, creating a corrected RINEX file. For the relative processing case, a Brazilian network with long baselines was processed in a daily solution considering a period of approximately one year. For the PPP case, the processing was accomplished using data collected by the IGS FORT station considering the period from 2001 to 2006 and a seasonal analysis was carried out, showing a semi-annual and an annual variation in the vertical component. In addition, a geographical variation analysis in the PPP for the Brazilian region has confirmed that the equatorial regions are more affected by the second and third order ionospheric effects than other regions.

Heteroplasmy in Hair: Study of Mitochondrial DNA Third Hypervariable Region in Hair and Blood Samples

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Solid-liquid transition in Nb powder determined by third harmonic susceptibility

Measurements of the third harmonic of the AC-susceptibility were employed to determine the boundaries of the linear regime of the magnetic response of Nb powder. Non-linear contributions to the magnetic response reveal the occurrence of a structured phase, disappearing as the vortex lattice melts to the liquid state. A systematic study of the third harmonic was conducted to determine how its onset temperature depends on experimental parameters, such as the frequency and amplitude of the excitation field. The melting line (ML) has been extracted from the onset temperature measured at low-frequencies and low-excitation fields in the presence of DC magnetic fields. The study indicates that the ML can be described by a 3D vortex-glass model, except at lower fields, where the system experiences a depinning crossover, and the best description of the experimental data is provided by a 3D Bose-glass model. (c) 2008 Elsevier B. V. All rights reserved.