Effectiveness of several solutions to prevent the formation of precipitate due to the interaction between sodium hypochlorite and chlorhexidine and its effect on bond strength of an epoxy-based sealer

To evaluate the effectiveness of isopropyl alcohol, saline or distilled water to prevent the precipitate formed between sodium hypochlorite (NaOCl) and chlorhexidine (CHX) and its effect on the bond strength of an epoxy-based sealer in radicular dentine. Methodology The root canals of 50 extracted human canines (n = 10) were instrumented. In G1, root canals were irrigated with 17% EDTA and 2.5% NaOCl; G2, as G1, except that 2% CHX was used as the final irrigant. In the other groups, intermediate flushes with isopropyl alcohol (G3), saline (G4) or distilled water (G5) were used between NaOCl and CHX. The specimens were submitted to SEM analysis to evaluate the presence of debris and smear layer, in the apical and cervical segments. In sequence, fifty extracted human canines were distributed into five groups (n = 10), similar to the SEM study. After root filling, the roots were sectioned transversally to obtain dentine slices, in the cervical, middle and apical thirds. The root filling was submitted to a push-out bond strength test using an electromechanical testing machine. Statistical analysis was performed using Kruskal–Wallis and Dunn's tests (α = 5%). Results All groups had similar amounts of residue precipitated on the canal walls (P > 0.05). The push-out bond strength values were similar for all groups, independently of the root third evaluated (P > 0.05). Conclusions Isopropyl alcohol, saline and distilled water failed to prevent the precipitation of residues on canal walls following the use of NaOCl and CHX. The residues did not interfere with the push-out bond strength of the root filling.

Push-out bond strength of fiber posts to root dentin using glass ionomer and resin modified glass ionomer cements

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparison of Different Dentin Pretreatment Protocols on the Bond Strength of Glass Fiber Post Using Self-etching Adhesive

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of Insertion Techniques for Resin Cement and Mechanical Cycling on the Bond Strength Between Fiber Posts and Root Dentin

Purpose: To evaluate the effect of the insertion technique for resin cement and mechanical cycling on the bond strength between fiber posts and root dentin.Materials and Methods: Sixty-four single-rooted bovine teeth were endodontically prepared to receive glass-fiber posts. The insertion of cement into the root canal was performed using one of the following techniques: POS, insertion with the post; LEN, the use of a lentulo-type drill; EXP, insertion with a straight-tip explorer; or CEN, the use of a Centrix syringe. Half of the specimens were mechanically cycled. All specimens were sectioned into slices of 1.8 mm for the push-out test and 0.5 mm for analysis of the cement layer quality.Results: The insertion technique affected the interaction between factors (bond strength and mechanical cycling; p < 0.0001). Insertion of the Centrix syringe after mechanical cycling showed the highest bond values (13.6 +/- 3.2 MPa). Group-to-group comparisons for baseline and cycled conditions indicated that mechanical cycling significantly influenced the bond strength (p < 0.0001) of the POS and CEN groups. The quality of the cement layer did not differ between the techniques when evaluated in the middle (p = 0.0612) and cervical (p = 0.1119) regions, but did differ in the apical region (p = 0.0097), where the CEN group had better layer quality for the two conditions tested (baseline and cycled).Conclusion: The use of the Centrix syringe improved the homogeneity of the cement layer, reducing the defects in the layer and increasing adhesive strength values to dentin, even after mechanical cycling.

A critical evaluation of bond strength tests for the assessment of bonding to Y-TZP

Objectives. To compare three different designs for measuring the bond strength between Y-TZP ceramic and a composite material, before and after ceramic surface treatment, evaluating the influence of the size of the adhesive interface for each design.Methods. 'Macro'tensile, microtensile, 'macro'shear, microshear, 'macro'push-out, and micropush-out tests were carried out. Two Y-TZP surface treatments were evaluated: silanization (sil) and tribochemical silica coating (30 mu m silica-modified Al2O3 particles + silanization) (TBS). Failure mode analysis of tested samples was also performed. Results. Both the surface treatment and the size of the bonded interface significantly affected the results (p = 0.00). Regardless of the type of surface treatment, the microtensile and microshear tests had higher values than their equivalent "macro" tests. However, the push-out test showed the highest values for the "macro" test. The tensile tests showed the greatest variability in results. The tribochemical silica coating method significantly increased bond strength for all tests.Significance. Different test designs can change the outcome for Y-TZP/cement interfaces, in terms of mean values and reliability (variability). The 'micro'tests expressed higher bond strengths than their equivalent 'macro'tests, with the exception of the push-out test (macro > micro). (C) 2015 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Multi-step adhesive cementation versus one-step adhesive cementation: push-out bond strength between fiber post and root dentin before and after mechanical cycling

This study evaluated the effects of mechanical cycling on resin push-out bond strength to root dentin, using two strategies for fiber post cementation. Forty bovine roots were embedded in acrylic resin after root canal preparation using a custom drill of the fiber post system. The fiber posts were cemented into root canals using two different strategies (N = 20): a conventional adhesive approach using a three-step etch-and-rinse adhesive system combined with a conventional resin cement (ScotchBond Multi Purpose Plus + RelyX ARC ), or a simplified adhesive approach using a self-adhesive resin cement (RelyX U100). The core was built up with composite resin and half of the specimens from each cementation strategy were submitted to mechanical cycling (45 degree angle; 37 degrees C; 88 N; 4 Hz; 700,000 cycles). Each specimen was cross-sectioned and the disk specimens were pushed-out. The means from every group (n = 10) were statistically analyzed using a two-way ANOVA and a Tukey test (P = 0.05). The cementation strategy affected the push-out results (P < 0.001), while mechanical cycling did not (P = 0.3716). The simplified approach (a self-adhesive resin cement) had better bond performance despite the conditioning. The self-adhesive resin cement appears to be a good option for post cementation. Further trials are needed to confirm these results.

Produção de mudas de maracujazeiro-amarelo por enxertia hipocotiledonar sobre sete espécies de passifloras

The yellow passion fruit (Passiflora edulis Sims f. flavicarpa Deg.) Passifloraceae is the main crop in Brazil, and the crop has found some difficulties, particularly concerned to the orchards longevity, which has been reduced due to diseases and nematodes that attack the root system. This study was carried out to establish technologies for the production of seedlings of yellow passion fruit by hypocotyledonary grafting on seven rootstocks. The treatments used as rootstocks were: P. edulis f. flavicarpa, P. caerulea, P. alata, P. giberti, P. coccinea, P. cincinnata and P. setacea. The experimental design was completely randomized, with 36 replications for each rootstock. The percentage of graft survival, plant height, number of leaves and rootstock diameter were the characteristics evaluated. The hypocotyledonary grafting methodology was successful for most species tested. P. caerulea, P. giberti, P. cincinnata and P. flavicarpa were the stood out rootstocks by their high conditions of plants growth, and by their early plants production.

Perdas de grãos e distribuição de palha na colheita mecanizada de soja

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Indução do florescimento e crescimento de tangerineira 'Poncã' (Citrus reticulata Blanco) em função da irrigação e da aplicação de paclobutrazol

O experimento foi conduzido na Faculdade de Ciências Agronômicas - UNESP/Câmpus de Botucatu (SP), com o objetivo de avaliar o florescimento fora de época e o crescimento vegetativo da tangerineira 'Poncã'. Nesse contexto, adotou-se o delineamento estatístico em blocos casualizados, em parcelas subdivididas, com duas repetições, na instalação do ensaio. Os dois tratamentos de -0,03 e -0,05 MPa, como potenciais mínimos da água no solo, constituíram as parcelas e as quatro doses de paclobutrazol: 0; 4; 8 e 12 g por planta, nas subparcelas. No segundo ano de pesquisa, foram mantidas as mesmas parcelas e foram aplicadas nas plantas das subparcelas as doses de 0; 500; 1000 e 2000 mg l-1 de paclobutrazol, via foliar. Cada parcela foi constituída de 16 plantas, sendo oito destinadas à avaliação. Utilizou-se, em ambas as combinações, de um tratamento sem irrigação (-0,07 MPa) e sem aplicação de paclobutrazol, como testemunha. Foram avaliados parâmetros, como a altura, diâmetro médio, volume e área de projeção da copa e condutância estomática para caracterizar a resposta das plantas aos tratamentos empregados. Concluiu-se que a aplicação do paclobutrazol e a variação do potencial da água no solo não proporcionaram a indução do florescimento fora de época das tangerineiras, e que os níveis de paclobutrazol influenciaram no desenvolvimento das plantas.

Basicladia emedii (Cladophorales, Chlorophyta): a new freshwater epilithic species from Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Contribuição ao estudo da reação á tricofitina nas dermatofitoses

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influence of Er,Cr: YSGG laser on bond strength of self-adhesive resin cement

The purpose of this study was to investigate the bond strength of fiber post previously laser treated root canals. Forty single-rooted bovine teeth were endodontically treated, randomly and equally divided into two main groups according to the type of pretreatment: G1: 2.5% NaOCl (control group); and G2: Er,Cr:YSGG laser. Each group was further subdivided into 2 groups based on the category of adhesive systems/ luting materials used: a: an etch-and-rinse resin cement (Single Bond/RelyX ARC; 3M ESPE), and b: a self-adhesive resin cement (Rely X Unicem; 3M ESPE). Three 1.5 mm thick slabs were obtained per root and the push-out test was performed at a crosshead speed of 0.5 mm/min until post dislodgement occurred. Data were analyzed by ANOVA and post-hoc Tukey's test at a pre-set alpha of 0.05. Analysis of variance showed no statistically significant difference (p > 0.05) among the groups G1a (25.44 ± 2.35) and G1b (23.62 ± 3.48), G2a (11.77 ± 2.67) and G2b (9.93 ± 3.37). Fractures were observed at the interface between the dentin and the resin in all groups. The Er,Cr:YSGG laser irradiation did not influence on the bond strength of the resin cements and the etch-and-rinse resin cement had better results on bond strength than self-adhesive resin cement.

Caracterização das perdas e distribuição de cobertura vegetal em colheita mecanizada de soja

O conceito de controle de qualidade nas operações inserido na agricultura é viabilizado por incidir diretamente nos principais objetivos do processo produtivo: retorno econômico e aumento da produtividade. A colheita mecanizada normalmente é realizada sem que haja controle efetivo para que a variabilidade das perdas fique dentro de padrões aceitáveis. Esta pesquisa teve o objetivo de determinar e caracterizar as perdas e a distribuição da cobertura vegetal após a colheita mecanizada da soja, por meio de ferramenta de controle estatístico de processo (cartas de controle). A média da perda de grãos total foi próxima do limite superior aceitável para a cultura da soja, apresentando alta variabilidade entre os pontos, tornando o processo fora de controle. A distribuição de cobertura vegetal manteve-se em processo controlado, com maior variabilidade onde o relevo foi mais inclinado. A utilização das cartas de controle foi eficiente na identificação dos pontos fora de controle e na avaliação da qualidade do processo de colheita.

Pesquisa em educação ambiental: panorama da produção brasileira e alguns de seus dilemas

A partir de textos publicados em periódicos e de levantamentos já realizados em bancos de dissertações e teses, procuramos indicar tendências e perspectivas na produção da pesquisa em educação ambiental (EA) no Brasil. Fica evidente o aumento do número de trabalhos produzidos nos últimos 10 anos. do ponto de vista metodológico, observa-se que a maioria das pesquisas faz uso de abordagens qualitativas, orientadas, muitas vezes, para uma ação colaborativa. Fica também evidente a concentração de trabalhos em certas regiões do país. O sistema universitário público, e neste a pós-graduação, constitui-se no lócus privilegiado dessa produção. A estreita relação entre pesquisa em EA e os sistemas de pós-graduação indica que, para compreender tal produção, torna-se necessário compreender o sistema de pós-graduação brasileiro. Salienta-se a importância de se construir espaços múltiplos que se constituam em lócus de discussão e divulgação da pesquisa em EA no país e de mobilização política de pesquisadores da área.

Macro mineral requirements by grazing zebu bovines

The objective of this study was to determine requirements of calcium (Ca), phosphorus (P), magnesium (Mg), potassium (K) and sodium (Na) for grazing zebu bovines. The experiment area was composed of Brachiaria decumbens paddocks. Twenty-seven non-castrated animals, with initial live weight of 311.0 kg and at an average age of 14 months were used. Three animals were slaughtered, after adaptation period, so they were used as control for estimates of empty body weight and initial body composition of animals in the experiment. Out of the 24 remaining animals, four were sent to the maintenance group with restrict grazing time to limit energy intake close to the maintenance level. The other 20 animals were distributed in four treatments: mineral mixture, self-control intake and three-times-a-week-offer frequency (offered on Mondays, Wednesdays and Fridays) and daily. Concentrations of all studied macro elements in empty body and empty body gain decreased as live weight increased. The ratios obtained for g Ca/100 g of retained protein and g P/100 g of retained protein were 9.18 and 4.72, respectively. Total dietary requirement of calcium was lower than the one recommended by NRC (2000), but P requirement was very close to that.