Phase transition and dielectric properties of La-doped Pb(Zr, Ti)O-3 antiferroelectric ceramics

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Cytokines and acute-phase serum proteins as markers of inflammatory regression during pulmonary tuberculosis treatment

Tuberculosis is still increasing and was declared a worldwide sanitary emergency by the World Health Organization (WHO) in 1995. Its control is difficult due to long treatment duration and lack of markers of treatment success or failure. Cytokines such as IFN-gamma and TNF-alpha, a central factor in immune response against Mycobacterium tuberculosis, are responsible for the interaction between T lymphocytes and the infected macrophage and are also produced during this interaction. As proinflammatory cytokines have a close relationship with mycobacteria clearance, in fact even preceding it, they could be used as markers for inflammatory activity and response to treatment. Proinflammatory cytokines act in the liver and stimulate a strong local and systemic acute-phase response as a result of homeostatic and physiological responses also induced by them. Acute-phase proteins produced by cytokine activity are useful diagnostic markers that could also be used to monitor treatment response as they can be serially quantified. The objective of this study was to evaluate IFN-gamma, TNF-alpha, IL-10 and TGF-beta production in supernatant of peripheral blood mononuclear cell (PBMC) and monocyte (MO) cultures, as well as serum acute-phase response through total protein, albumin, globulin, C-reactive protein (CRP), alpha-1-acid glycoprotein (AGP), and erythrocyte sedimentation rate (ESR) as regression markers of inflammatory response during pulmonary tuberculosis treatment. Twenty blood donors (G1) from the Blood Bank at Botucatu School of Medicine's University Hospital (BSM-UH) were evaluated once and 28 pulmonary tuberculosis patients (G2): 13 from BSM-UH and 15 from the Bauru State Health Secretariat. Patients were evaluated at three moments of treatment: before (M1), at three months (M2), and at the end (M3). Cytokines were determined in 20ml of peripheral blood (ELISA), with or without activation: lipopolysaccharide (LPS) for MO culture and phytohemagglutinin (PHA) for PBMC culture. Acute-phase protein behavior in G2 throughout treatment was: Globulins: M1> M2, M1> M3 (rho < 0.001); CRP: M1> M2> M3 (.< 0.001); AGP for men: M1> M2, M1> M3 (rho < 0.001); ESR for men: M1> M2, M1> M3 (rho < 0.0016) and for women: M1> M2 (.< 0.025). Comparison between cytokine levels found in supernatant of MO and PBMC cultures, with and without stimulus, in G1 and G2 during treatment showed: TNF-alpha (with/ without LPS) at M1: G2> G1; at M2: G2> G1 (rho < 0.001); (without LPS) at M3: G2> G1 (rho < 0.001), (with LPS) at M3: G2> G1 (rho < 0.028); IFN-. (with and without PHA) at M1: G2> G1; at M2: G2> G1 (rho < 0.001); IL-10 (with and without LPS) at M1: G2> G1; at M2: G2> G1; at M3: G2> G1 (rho < 0.001); TGF-beta (with and without LPS) at M1: G2> G1; at M2: G2> G1 (rho < 0.001), (without LPS) at M3: G2> G1 (rho < 0.001). In G2, all cytokines in supernatant of MO and PBMC cultures, with and without stimulus, showed: M1> M2> M3 (rho < 0.01). Levels of globulins, CRP, AGP, and ESR in patients with pulmonary tuberculosis before treatment (M1) were significantly higher than reference values, suggesting their use as diagnostic markers and indicators of treatment. The CRP decreasing values along treatment could be taken as a marker of the regression of inflammatory process and of response to treatment in patients with pulmonary tuberculosis.Regarding cytokines, there was significant increase in TNF-alpha, IFN-gamma, IL-10, and TGF-alpha levels before and at three months treatment, with and without stimulus; in TNF-a and IL-10 lvels, with and without stimulus, as well as in TGF-alpha levels without stimulus at six months. Patients had higher levels of all studied cytokines than controls before treatment, and these values decreased along treatment. In this study, pulmonary tuberculosis patients showed a Th0 cytokine profile before treatment, with the production of both Th1 (IFN-gamma) and Th2 (IL-10) cytokines, in addition to TNF-alpha inflammatory and TGF-alpha regulatory and fibrosis-inducer cytokines. At the end of treatment, all had evolved to Th2 profile, probably in an attempt to reduce the harmful effects of the proinflammatory activity of the Th1 cytokine profile and of the still above-normal levels of TNF-alpha. The high levels of TGF-alpha, also found in these patients, are related to its important role in the extracellular matrix deposition and fibrosis induction that characterize tuberculosis healing process. IFN-gamma was the only cytokine reaching normal levels at the end of treatment, which suggests its use as a marker of response to treatment.

Use of sugar cane bagasse as solid phase extractor for cadmium determination by FAAS

The present paper describes the use of sugar cane bagasse as solid phase extractor for cadmium determination after complexation of the analyte with ammonium diethyldithiophosphate (ADDP) and sorption of the Cd-DDP complexes on the solid support. The concomitants were separated using a flow injection analysis (FIA) system coupled to flame atomic absorption spectrometry (FAAS) for determination. The main parameters such as ADDP concentration, acid medium, flow rate, reaction coil length, and reaction time were investigated.The results obtained with HNO3 showed good accuracy and precision. The enhancement factor was 20.5 times for a 120-second preconcentration time, and the analytical frequency was 25 determinations per hour. The calibration curve was linear over the concentration range of 1-40 mu g L-1 Cd with a LOD of 0.697 mu g L-1 Cd and a relative standard deviation of 0.96% after 12 successive measurements of 30 mu g L-1 Cd.The proposed method was evaluated for the FIA-FAAS analysis of certified reference materials (tomato leaves, spinach leaves, and bovine liver) and Cd-spiked foods (shrimp, sardine, tuna, chicken liver and bovine liver). Good recoveries (80.0-97.1%) for the Cd-spiked samples and certified reference materials were obtained. The results of bagasse-packed minicolumns were compared with Si-C,8 packed minicolumns. The F-test was applied between Si-C-18/Bagasse minicolumns, Si-C-18/certified values, and bagasse/certified values. It was found that the results were in agreement with the certified values at a 95% confidence level.

Phase-locking of superimposed diffractive gratings in photoresists

The superposition of optical interference patterns in a photoresist film can produce a rich variety of diffractive structures. In particular, a periodic non-sinusoidal surface relief profile can be synthesized by adding the Fourier components (sinusoidal gratings) of the desired profile. In order to control the shape of the grooves it is very important an accurate adjustment of the relative spatial shift between the recorded sinusoidal components. We describe the implementation of an opto-electronic feedback loop to select and lock such spatial shift at any desired position, thus allowing the synthesis of structures varying from symmetrical to asymmetrical relief profiles in a continuous range. To demonstrate the feasibility of the technique, the Fourier synthesis of two spatial harmonics is accomplished. The superposed sinusoidal gratings were recorded in positive photoresist films using a holographic setup operating at the line lambda = 457.9 run of an argon-ion laser. A detailed description of the procedure as well as the resulting profiles recorded in the photoresist is presented. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Progress on holographic techniques to measure real-time phase and amplitude gratings in photosensitive materials

In this paper we present and demonstrate a technique that allows simultaneous and independent measurement of small changes in the refractive index and the absorption coefficient produced in photosensitive materials during holographic exposure. The technique is based on the synchronous detection of two-wave mixing signals in both directions of the transmitted interfering beams. By processing both signals it is possible to separate the diffraction contributions of the refractive index from the absorption coefficient and simultaneously stabilize the incident fringe pattern. The demonstration of this technique is undertaken by following the temporal evolution of the phase and amplitude modulations in photoresist films. To check the ability of the technique to perform numeric evaluations, for a positive photoresist the changes in the optical constants were measured and compared with those obtained using independent methods.

Advances in phase-stepping real-time holography using photorefractive sillenite crystals

This work presents a review of recent developments in phase-stepping real-time holographic interferometry with photorefractive sillenite crystals. Quantitative results are shown in micro-rotation, micro-displacement, and micro-deformation measurements, and in wave-optics and surface analysis as well. The phase stepping was carried out in a four-frame process and the resulting phase map was unwrapped by applying a sin/cos filter. The experimental results are in good agreement with the ones obtained through other means, showing the promising potentialities of phase-stepping real-time holographic interferometry for in situ visualisation, monitoring and analysis in non-destructive testing.

Detection and quantification of antibodies to Newcastle disease virus in ostrich and rhea sera using a liquid phase blocking enzyme-linked immunosorbent assay

A liquid phase blocking ELISA (LPB-ELISA) was adapted for the detection and quantification of antibodies to Newcastle disease virus. Sera from vaccinated and unvaccinated commercial flocks of ostriches (Struthio camelus) and rheas (Rhea americana) were tested. The purified and nonpurified virus used as the antigen and the capture and detector antibodies were prepared and standardized for this purpose. The hemagglutination-inhibition (HI) test was regarded as the reference method, the cutoff point for the LPB-ELISA was determined by a two-graph receiver operating characteristic analysis. The LPB-ELISA titers regressed significantly (P < 0.0001) on the HI titers with a high correlation coefficient (r = 0.875). The two tests showed good agreement ( = 0.82; P < 0.0001), relative sensitivity (90.91%) and specificity (91.18%), and accuracy (91.02%), suggesting that they are interchangeable.

Mnltiloop Controller and Reference Generator for a Dynamic Voltage Restorer Implementation

This paper deals with the design and analysis of a Dynamic Voltage Restorer output voltage control. Such control is based on a multiloop strategy, with an inner current PID regulator and an outer P+Resonant voltage controller. The inner regulator is applied on the output inductor current. It will be also demonstrated how the load current behavior may influence in the DVR output voltage, which. justifies the need for the resonant controller. Additionally, it will be discussed the application of a modified algorithm for the identification of the DVR voltage references, which is based on a previously presented positive sequence detector. Since the studied three-phase DVR is assumed to be based on three identical H-bridge converters, all the analysis and design procedures were realized by means of single-phase equivalent circuits. The discussions and conclusions are supported by theoretical calculations, nonlinear simulations and some experimental results.

Synchronous machines parameters identification using load rejection test data

This work shows a computational methodology for the determination of synchronous machines parameters using load rejection test data. The quadrature axis parameters are obtained with a rejection under an arbitrary reference, reducing the present difficulties.

Identification of synchronous machine parameters using load rejection test data

This work shows a computational methodology for the determination of synchronous machines parameters using load rejection test data. By machine modeling one can obtain the quadrature parameters through a load rejection under an arbitrary reference, reducing the present difficulties. The proposed method is applied to a real machine.

On non-ideal and non-linear portal frame dynamics analysis using Bogoliubov averaging method

We apply the Bogoliubov Averaging Method to the study of the vibrations of an elastic foundation, forced by a Non-ideal energy source. The considered model consists of a portal plane frame with quadratic nonlinearities, with internal resonance 1:2, supporting a direct current motor with limited power. The non-ideal excitation is in primary resonance in the order of one-half with the second mode frequency. The results of the averaging method, plotted in time evolution curve and phase diagrams are compared to those obtained by numerically integrating of the original differential equations. The presence of the saturation phenomenon is verified by analytical procedures.

A multisampling time-domain CMOS imager with synchronous readout circuit

A novel multisampling time-domain architecture for CMOS imagers with synchronous readout and wide dynamic range is proposed. The architecture was implemented in a prototype of imager with 32x32 pixel array fabricated in AMS CMOS 0.35νm and was characterized for sensitivity and color response. The pixel is composed of an n+/psub photodiode, a comparator and a D flip-flop having 16% fill-factor and 30νmx26νm dimensions. The multisampling architecture requires only a 1 bit per pixel memory instead of 8 bits which is typical for time-domain active pixel architectures. The advantage is that the number of transistors in the pixel is low, saving area and providing higher fill-factor. The maximum frame rate is analyzed as a function of number of bits and array size. The analysis shows that it is possible to achieve high frame rates and operation in video mode with 10 bits. Also, we present analysis for the impact of comparator offset voltage in the fixed pattern noise. Copyright 2007 ACM.

Analysis of electric torque in single machine-infinite bus system using phase shifters

ResumoThe main idea of this work is based on the analysis of the electric torque through the acting of the PS in the power system, provided of a control for the compensation degree (PSC). A linear model of the single machine-infinite bus system is used with a PS installed (SMIB/PS system). The variable that represents the presence of PS in the net is associated to the phase displacement introduced in the terminal voltage of the synchronous machine by PS. For the input signals of the PSC are evaluated variations of the angular speed of the rotor, the current magnitude and the active power through the line where the PS is located. The simulations are accomplished to analyze the influence of the PS in the torque formation (synchronizing and damping), of the SMIB/PS system. The analysis are developed in the time and frequency domain.

Multiloop controller and reference generator for a dynamic voltage restorer implementation

This paper deals with the design and analysis of a Dynamic Voltage Restorer output voltage control. Such control is based on a multiloop strategy, with an inner current PID regulator and an outer P+Resonant voltage controller. The inner regulator is applied on the output inductor current. It will be also demonstrated how the load current behavior may influence in the DVR output voltage, which justifies the need for the resonant controller. Additionally, it will be discussed the application of a modified algorithm for the identification of the DVR voltage references, which is based on a previously presented positive sequence detector. Since the studied three-phase DVR is assumed to be based on three identical H-bridge converters, all the analysis and design procedures were realized by means of single-phase equivalent circuits. The discussions and conclusions are supported by theoretical calculations, nonlinear simulations and some experimental results. ©2008 IEEE.

Single-phase current-source-boost inverter for renewable energy sources

This paper presents a new methodology for the operation and control of a single-phase current-source (CS) Boost Inverter, considering that the conventional CS boost inverter has a right-half-plane (RHP) zero in its control-to-output transfer function, and this RHP zero causes the known non-minimum-phase effects. In this context, a special design with low boost inductance and a multi-loop control is developed in order to assure stable and very fast dynamics. Furthermore, the proposed inverter presents output voltage with very low total harmonic distortion (THD), reduced components and high power density. Therefore, this paper presents the inverter operation, the proposed control technique, the main simulation results and a prototype in order to demonstrate the feasibility of the proposal. © 2011 IEEE.