Proposta para planejamento da arborização viária do bairro do Alvinópolis, município de Atibaia - SP

The urban arborization planning must consider technical criteria, to avoid future conflicts between trees and the urban space, and sociocultural criteria, to satisfy the local population necessities. Considering this principle, the present work proposes an arborization plan for a pilot area enclosing three of the principal streets from Alvinopolis District, county of Atibaia – SP. In order to tackle this objective, requests of tree removal were analyzed to get a panorama of how the subject takes place in the county. After that, promising sites for tree planting were selected in the enclosing area, and urban arborization of the three (3) main streets were retake, proposing necessary substitutions. Finally, 238 residents all over Alvinopolis County have been interviewed, with the objective of appraising their subject sense and focus on environmental education. Then three maps were made: the first one representing characteristics that influence in arborization, the second representing the present arborization and the nine (9) necessary substitutions, and the third representing the plan for the arborization of the pilot area. From the interviewed people, 79% shown themselves favorable to urban arborization, otherwise it does not discard the necessity to inform population about adequate species, county laws and adequate handling of trees.

A comunicação de empresas verdes e a relação com o consumidor consciente

This academic work has as its objective to demonstrate the fundamental role of communication as a tool towards implantating an environmental management project in organizations, aswell as familiarizing with the complex relashionship be-tween green businesses and its publics. The concern involving environmental prob-lems are increasing and it directly affects the consumer’s choice and their requests on organizations’ behavior. The integration with all sectors of economy is necessary as a part of a developing process that has as its main objective the environmental conservation and therefore the quality of human life on planet. There is also the question of how in the process of communication there is not an only way of interven-tion, but a continuous reciprocal action. The work is accomplished with an analyses of the green management communication of the business Grupo Abril

Proposta de uma automação residencial para um anteprojeto de uma instalação eletrica

The human social organization has undergone major changes in recent years. The technological and digital revolutions accelerated the process of dissemination and evolution of the knowledge in all sciences, from social studies to nanotechnology. This process led to many advances that have enabled the emergence of new markets. Among these new markets, residential automation shows to be a market of great potential, seeking to meet the needs of residents, in order to make their daily practice and as fast as the rhythm of present life requests. To perform this task the residence stops being a passive place and becomes an active and controllable system, where actions may occur without the need for direct human interaction. The aim of this work is designing the electrical installation of a residence seeking better use of energy and show the technology diversity involving intelligent houses

Medidas de adequação dos impactos causados por uma indústria de esmagamento de soja

In the last years, environmental issues are being gradually addressed because of awareness regarding the limitation of natural resources for the maintenance of life on Earth, and the role played by the media in reporting on various issues that are related to the theme. In the industrial sector, this topic becomes ever more present in its planning. With the increase of production activities, the generation of waste causes many complications, both in industry and in the environment. For this reason laws and rules were created so that such problems are minimized, thus causing less impact on the environment. In this work was a study of the possible environmental impacts in a soybean crushing industry, situated in the city of Osvaldo Cruz, São Paulo state, detailing the sources and impacts of waste generation, and associate them relevant laws. From this, measures were proposed measures of adequacy involving compliance with commitments to environmental agencies, relevant requests of buyers and / or suppliers and improving environmental performance

O Ministério Público estadual e a justiciabilidade do direito à qualidade do ensino fundamental público no Brasil: funções e interpretações

Pós-graduação em Educação - FCT

A (des) motivação extrínseca no contexto escolar: análise de um estudo de caso

The motivation of the pupils has been pointed as one of the factors that have influenced directly about what and as they learn. The boardings social-cognitivists of the motivation point two orientations: the intrinsic, that it is seen as natural trend of the individual, in which it executes an activity for considering it attractive, and the extrinsical, with the purpose to take care of to requests or pressures of other people, or to demonstrate to aptitudes and abilities. This research investigates the extrinsical motivation and its consequences in the pertaining to school performance of a pupil considered for the professors as having learning difficulties. The results of the research indicate the influence of the pertaining to school and familiar environment in the motivation and, this in the pertaining to school performance of the pupil, pointing the relevance of studies on the thematic one.

Osteotomia sagital da crista alveolar para instalação de implantes Bicon

This case report presents details of a new surgical technique for mandibular ridge sagittal osteotomy and expansion associated to immediate dental implants in atrophic ridges. The bone atrophies represents a challenge for the surgeons that intends to modify this situation. In the past, the only viable option was the onlay bone graft. However, the bone graft requests a second surgical site that certainly increases the postoperative morbidity, without mentioning the longer treatment time required. The sagittal osteotomy of the alveolar crest represents a faster option, because it eliminates the time requested for bone graft integration, providing rehabilitation of edentulous areas with thin alveolar crests that otherwise would need additi onal surgical procedures for a satisfactory result. The authors report a clinical case in which this technique was used with the installation of a Bicon dental implant in the same surgical time, showing all the steps for this single-tooth rehabilitation.

Complicações Associadas aos Enxertos Ósseos Aposicionais com Osso Autógeno

Introdution: Tooth extraction results in alveolar ridge resorption due to the progressive reabsorption, which frequently is a limitating factor of dental implants treatment, in function of the insufficient bone height for execution, could be indicated the use of grafts for increase of the alveolar edge. However, the success of the bone graft requests the meticulous attendance of the clinical stages. Proposition: The objective of this research was to evaluate the postoperative complications associated to the autogenous bone grafts. Materials and Methods: Through a random retrospective analysis, 90 file records of patients submitted to the surgical procedure of autogenous bone graft in the period of January from 2000 to the March of 2008. A clinical record was elaborated with base in the necessary data for this evaluation. Results: About the file data analysis, 59 female with average of 49,42 years and 31 male with average of 47,90 years. The previous diseases most related were arterial hypertension, stomachache and diabetis. The smokers was noticed in 13,3% of patients. The donor site most used was a mandibular ramus. The postoperative complications in receiving area represented 17,8% of file datas analysed and in the donor site only one patient showed parestesis. Conclusion: Among the total analyzed files it was observed that the postoperative complications associated with the autogenous bone grafts represented 18,9% of the patients submitted to the procedure, more frequently affecting the receiving area, obtaining partial exposure of the bone graft and absence of inserted gingiva on vestibular cortical bone.

Recuperação de amidos remanescentes em resíduos de extração da fécula de mandioca

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo de dormentes de aço sob solicitações verticais, longitudinais e transversais em via permanente ferroviária

This article presents the results of research conducted on full-scale models, studying the behavior of steel sleepers under the action of static loads, in vertical, longitudinal and transverse directions. For the research models were run with rails TR-68, fixed with elastic system on seven sleepers each type, separately, embedded in standard ballast with 35 cm height and on the basis of compacted soil with 30 cm thick. For the load tests were constructed using reaction systems of vertical and horizontal forces with the objective of applying the requests. The system of readings and data acquisition was fully computerized, obtaining in real time the values of forces and displacements. The results were compared with those installed in the same way with sleepers of wood, mono-block and bi-block prestressed concrete. The analyzed results provided unprecedented parameters in Brazil and of great importance for the design of modern railway permanent way, using steel sleepers.

Metodologia para otimização em subcontratação de serviço de usinagem

Operational Research (OR) is an eminent science to business competitiveness and the capacity of algorithms and spreadsheets that exist today allows people to apply them for a lower cost and with less complexity. However, spreadsheets linked to OR techniques, when directed to real problems, are still little explored in their full potential. In order to use them better, this article utilizes the Microsoft Office Excel to solve an optimization practical problem and decision-making of machining subcontracting. In general, although considered a frequent problem, is not of easy solution, optimize the mix of production versus outsourcing, because of the restrictions and resources available, it requests investments in specific software. In this way, this research aims to develop software to be called SOSU (Optimization Software for Machining Subcontracting). SOSU should introduce the best mix of internal and subcontracted machining for n types of parts that, over a certain period of time t, maximize capacity and meet all the demand at the lowest cost possible. The methodology adopted follows the bibliographic reference and it is assumed that the necessary data to prove from mathematical modeling of production areas and from a system of costs already structured. The nature of the problem justifies the application of Linear Programming (LP), Visual Basic for Applications (VBA) is used for computational implementation and interface with the user and the supplement Solver to find the solution. The analysis of the experiments show that the SOSU optimizes resources and improves the decision-making process, besides an easy operation, it can be implemented or quickly adapted and without the need of large investments.

O dispositivo analítico no hospital na clínica com transexuais: entre o ser e o sujeito

Pós-graduação em Psicologia - FCLAS

O gênero tira em materiais didáticos

Pós-graduação em Letras - FCLAR

Melhoria dos serviços de TI utilizando o gerenciamento de serviços

Pós-graduação em Engenharia de Produção - FEG

O setor leptônico neutro e a violação de CP

Pós-graduação em Física - IFT