Atmospheric particulate polycyclic aromatic hydrocarbons from road transport in southeast Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Contribution of sugar-cane harvesting season to atmospheric contamination by polycyclic aromatic hydrocarbons (PAHs) in Araraquara city, Southeast Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Electrochemical Determination of Inorganic Contaminants in Automotive Fuels

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Anodic Stripping Voltammetric Determination of Lead (II) and Cadmium (II) by Using a Carbon Nanotubes Paste Electrode Modified with Ion Exchange Synthetic Resin

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Determinação de benzeno, tolueno, etilbenzeno e xilenos em gasolina comercializada nos postos do estado do Piauí

Automotive gasoline consists of a complex mixture of flammable and volatile hydrocarbons derived from crude oil with carbon numbers within the range of 4-12 and boiling points range of 30-225 ºC. Its composition varies with the kind of crude oil and the type of refinery process that they undergone. Aromatics hydrocarbons, in particular benzene, toluene, ethylbenzene and isomeric xylenes (BTEX) are the toxic group constituents presents. GC-FID was employed to quantify these hydrocarbons in 50 commercial gasoline samples from Piauí state. Statistical analysis techniques, such as PCA and HCA were used to analyze the data. Moreover, several validation parameters were evaluated.

A square-wave voltammetric method for analysing the colour marker quinizarine in petrol and diesel fuels

This work presents an electroanalytical method based on square-wave voltammetry (SWV) for the determination of quinizarine (QNZ) in a mixture of Britton-Robinson buffer 0.08 mol L-1 with 30% of acetonitrile. The QNZ was oxidized at glassy carbon electrode in and the well-defined peak at +0.45 V vs. Ag/AgCl can be used for its determination as colour marker in fuel samples. All parameters were optimized and analytical curves can be constructed for QNZ concentrations ranging from 2.0 x 10(-6) mol L-1 to 1.4 x 10(-5) mol L-1, using f = 60 Hz and E-sw = 25 mV. The method offers a limit detection of 4.12 x 10(-7) mol L-1 and a standard deviation of 4.5% when six measurements of 1.25 x 10(-5) mol L-1 are compared. The method was successfully applied for determining QNZ in gasoline and diesel oil and the obtained results showed good agreement with those reported previously. (c) 2006 Elsevier Ltd. All rights reserved.

Riscos nucleares e outros riscos: avaliação e aceitabilidade

The risks of accidents, illness and early death are part of life on Earth, which touches all living creatures, including Mankind. Because of modern mass communication media, the emotional impact of current risks are greater than in the past. Many unnecessary risk can and should be avoided, and with respect to other they can be drastically reduced. In addition to this, some risks should be confronted in order to avoid greater ones. In any risk analysis, eventual benefits should be taken into consideration, the risks surrounding other activities and other factors. Some risks examples and their implications are presented and discussed, in general. Nuclear energy is specifically treated, but it also refers and comments that which surrounds other human activities (airplanes, automobiles, smog, gasoline, DDT, and coal energy). As in the history of aviation, nuclear industry has a history of greater successes than failures. Nonetheless, in both cases, serious accidents deserve deep thought, including the increment of security norms. The current fear of some people to nuclear energy is compared to the unfounded fear at the advent of gasoline last century. Risks, naturally, should not be exagerated, but they cannot be discarded. The main intention of the author is to discuss the complexity of the problem, and to see that risks are evaluated and accepted. In relation to nuclear energy, the author only mentions his point of view, defended in other publications, that it involves very high risks.

The Brazilian experience of sugarcane ethanol industry

Biomass has gained prominence in the last few years as one of the most important renewable energy sources. In Brazil, a sugarcane ethanol program called ProAlcohol was designed to supply the liquid gasoline substitution and has been running for the last 30 yr. The federal government's establishment of ProAlcohol in 1975 created the grounds for the development of a sugarcane industry that currently is one of the most efficient systems for the conversion of photosynthate into different forms of energy. Improvement of industrial processes along with strong sugarcane breeding programs brought technologies that currently support a cropland of 7 million hectares of sugarcane with an average yield of 75 tons/ha. From the beginning of ProAlcohol to the present time, ethanol yield has grown from 2,500 to around 7,000 l/ha. New technologies for energy production from crushed sugarcane stalk are currently supplying 15% of the electricity needs of the country. Projections show that sugarcane could supply over 30% of Brazil's energy needs by 2020. In this review, we briefly describe some historic facts of the ethanol industry, the role of sugarcane breeding, and the prospects of sugarcane biotechnology.

Riscos nucleares e outros riscos: Avaliação e aceitabilidade

The risks of accidents, illness and early death are part of life on Earth, which touches all living creatures, including Mankind. Because of modern mass communication media, the emotional impact of current risks are greater than in the past. Many unnecessary risks can and should be avoided, and with respect to others, they can be drastically reduced. In addition to this, some risks should be confronted in order to avoid greater ones. In any risk analysis, eventual benefits should be taken into consideration, the risks surrounding other activities, and other factors. Some risks examples and their implications are presented and discussed, in general Nuclear energy is specifically treated, but it also refers and comments that which surrounds other human activities (airplanes, automobiles, smog, gasoline, DDT, and coal energy). As in the history of aviation, nuclear industry has a history of greater successes than failures Nonetheless, in both cases, serious accidents deserve deep thought, including the increment of security norms. The current fear of some people to nuclear energy is compared to the unfounded fear at the advent of gasoline last century Risks, naturally, should not be exagerated, but they cannot be discarded. The main intention of the author is to discuss the complexity of the problem, and to see that risks are evaluated and accepted. In relation to nuclear energy, the author only mentions his point of view, defended in other publications, that it involves very high risks.

Optimal linear and nonlinear control design for chaotic systems

In this work, the linear and nonlinear feedback control techniques for chaotic systems were been considered. The optimal nonlinear control design problem has been resolved by using Dynamic Programming that reduced this problem to a solution of the Hamilton-Jacobi-Bellman equation. In present work the linear feedback control problem has been reformulated under optimal control theory viewpoint. The formulated Theorem expresses explicitly the form of minimized functional and gives the sufficient conditions that allow using the linear feedback control for nonlinear system. The numerical simulations for the Rössler system and the Duffing oscillator are provided to show the effectiveness of this method. Copyright © 2005 by ASME.

Air quality and emissions management in the State of São Paulo, Brazil

The São Paulo State has 36 million people, 25 million living in three metropolitan areas. Only the São Paulo Metropolitan Region (SPMR) includes the state capital (São Paulo City) plus 38 cities, where ≈ 18 million people live, affected by frequent episodes of ozone, NOx, and fine particulate matter. In 2003, it was estimated that 15.1% of the SPMR vehicles used ethanol and 70.2% used the local gasoline. Natural gas vehicles have witnessed a booming participation in the last years, mainly through conversion of gasoline cars, and the present fleet is almost one million vehicles. To face the problems generated by light vehicles emissions the Federal Government set a program called PROCONVE - Program of Air Pollution Control from Vehicles - in 1986 and since then until now a significant reduction was reached, but the growth of the fleet hides most of the emission cuts. A discussion covers the evolution of the air pollution management in São Paulo; and innovative tools for air pollution management - both for mobile and stationary sources. This is an abstract of a paper presented at the 98th AWMA Annual Conference and Exhibition (Minneapolis, MN 6/21-24/2005).

Bioethanol - Brazil, 30 years of Proálcool

Brazil, which has always been in the forefront of sugarcane production, also occupies a prominent position as the first country to produce and use biofuel in its automobile fleet. This fact is a consequence of the introduction of a program which has already turned 30 years, the Próalcool (National Alcohol Program). The oil crisis in the seventies encouraged the government to develop an alternative way to replace gasoline. Bioethanol was then born as fuel obtained from fermentation of sugarcane juice, molasses or both. In the eighties, 85% of the cars ran exclusively on alcohol. Ethanol production in that decade exceeded sugarcane production by the mills. The installed units reached in that period the capacity to produce 18 billion liters of bioethanol per season, a volume equivalent to 100 million barrels of gasoline. The fermentation process, which so far had been restricted to manufacturing sugarcane liquor (aguardente) or ethanol as a byproduct of sugarcane, takes over the spotlight in the entrepreneurial scene. As a result, processes comprising engineering concepts came up and most of the biological phenomena involved in fermentation were understood. The knowledge gathered and the units installed have granted Brazil the hold of production technology and use of a clean fuel.

Biodegradability of diesel and biodiesel blends

The biodegradability of pure diesel and biodiesel and blends with different proportions of biodiesel (2% (commercial); 5% and 20%) was evaluated employing the respirometric method and the redox indicator 2,6-dichlorophenol indophenol (DCPIP) test. In the former, experiments simulating the contamination of natural environments (soil from a petrol station or water from a river) were carried out in Bartha biometer flasks (250 ml), and used to measure the microbial CO 2 production. With the DCPIP test, the capability of three inocula to biodegrade the blends was tested. Results show that although biodiesel is more easily and faster biodegraded than diesel oil, among the blends evaluated (2%, 5% and 20%), only the blend with higher concentration of biodiesel presented biodegradability significantly different from diesel and it was not verified an improvement on the biodegradation of the diesel by means of co-metabolism. © 2008 Academic Journals.

Variação temporal da resistividade elétrica em contaminação por gasolina

The definition of models and base parameters for application of investigation tools in environment with high complexity are a basic premise to any sciences. The geophysics is a science with solid theoretical base and applications in diversified areas of the sciences geological, astronomical, meteorological, among many others. Its application in environmental studies is relatively recent and needs further research. To understand the behavior of resident contaminants in a dynamic and complex environment as the geological, it requests studies in scale laboratorial, under control of factors seasonality variable. This work simulates a leak of gasoline in soil, under conditions and in laboratory scale, with the objective of monitoring the temporary behavior of the hydrocarbon under the optics of variation of the parameter physical electric resistivity. The results indicate increase of the resistivity in recent periods the contamination, followed for stability in the values and finally fall and return tendency to the natural conditions.

Use of soybean oil fry waste for economical biosurfactant production by isolated Pseudomonas aeruginosa using response surface methodology

The present study sought biotensoactive production from soybean oil fry waste using Pseudomonas aeruginosa ATCC 10145 and Pseudomonas aeruginosa isolated from the soil of a petroleum station having undergone gasoline and diesel oil spills. The results of the experiments were analyzed using a complete factorial experimental design, investigating the concentration of soybean oil waste, ammonia sulfate and residual brewery yeast. Assays were performed in 250-mL Erlenmeyer beakers containing 50 mL of production medium, maintained on a rotary shaker at 200 rpm and a temperature of 30±1 °C for a 48-hour fermentation period. Biosurfactant production was monitored through the determination of rhamnose, surface tension and emulsification activity. The Pseudomonas aeruginosa ATCC 10145 strain and isolated Pseudomonas aeruginosa were able to reduce the surface tension of the initial mexlium from 61 mN/m to 32.5 mN/m and 30.0 mN/m as well as produce rhamnose at concentrations of 1.96 and 2.89 g/L with emulsification indices of 96% and 100%, respectively.