Structural studies of prephenate dehydratase from Mycobacterium tuberculosis H37Rv by SAXS, ultracentrifugation, and computational analysis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Identification of a new quaternary association for legume lectins

Lotus tetragonolobus lectin (LTA) is a fucose-specific legume lectin. Although several studies report a diverse combination of biological activities for LTA, little is known about the mechanisms involved in L-fucosyl oligosaccharide recognition. The crystal structure of LTA at 2.0 angstrom resolution reveals a different legume lectin tetramer. Its structure consists of a homotetramer composed of two back-to-back GS4-like dimers arranged in a new mode, resulting in a novel tetramer. The LTA N-linked carbohydrate at Asn4 and the unusual LTA dimer-dimer interaction are related to its particular mode of tetramerization. In addition, we used small angle X-ray scattering to investigate the quaternary structure of LTA in solution and to compare it to the crystalline structure. Although the crystal structure of LTA has revealed a conserved metal-binding site, its L-fucose-binding site presents some punctual differences. Our investigation of the new tetramer of LTA and its fucose-binding site is essential for further studies related to cross-linking between LTA and complex divalent L-fucosyl carbohydrates. (C) 2007 Elsevier B.V. All rights reserved.

INFLUENCE of DIFFERENT SURFACE CONDITIONING PROTOCOLS on MICROTENSILE BOND STRENGTH of SELF-ADHESIVE RESIN CEMENTS TO DENTIN

Statement of problem. According to manufacturers, bonding with self-adhesive resin cements can be achieved without any pretreatment steps such as etching, priming, or bonding. However, the benefit of saving time with these simplified luting systems may be realized at the expense of compromising the bonding capacity.Purpose. The purpose of this study was to assess whether different dentin conditioning protocols influence the bond performance of self-adhesive resin cements to dentin.Material and methods. Flat dentin surfaces from 48 human molars were divided into 4 groups (n=12): 1) control, no conditioning; 2) H(3)PO(4), etching with 37% H(3)PO(4) for 15 seconds; 3) SEBond, bonding with self-etching primer adhesive (Clearfil SE Bond); and 4) EDTA, etching with 0.1M EDTA for 60 seconds. The specimens from each dentin pre-treatment were bonded using the self-adhesive cements RelyX Unicem, Maxcem or Multilink Sprint (n=4). The resin-cement-dentin specimens were stored in water at 37 degrees C for 7 days, and serially sectioned to produce beam specimens of 1.0 mm(2) cross-sectional area. Microtensile bond strength (mu TBS) testing was performed at 1.0 mm/min. Data (MPa) were analyzed by 2-way ANOVA and Tukey multiple comparisons test (alpha=.05). Fractured specimens were examined with a stereomicroscope (x40) and classified as adhesive, mixed, or cohesive. Additional bonded interfaces were evaluated under a scanning electron microscope (SEM).Results. Cement-dentin mu TBS was affected by the dentin conditioning approach (P <.001). RelyX Unicem attained statistically similar bond strengths to all pre-treated dentin surfaces. H(3)PO(4)-etching prior to the application of Maxcem resulted in bond strength values that were significantly higher than the other groups. The lowest mu TBS were attained when luting Multilink Sprint per manufacturers' recommendations, while H(3)PO(4)-etching produced the highest values followed by Clearfil SE bonding and EDTA. SEM observations disclosed an enhanced potential of the self-adhesive cements to form a hybrid layer when applied following manufacturer's instructions.Conclusions. When evaluated self-adhesive resin cements are used, selectively etching dentin with H(3)PO(4) prior to luting results in the most effective bonding. (J Prosthet Dent 2011;105:227-235)

Combinação linear ponderada na definição de áreas prioritárias à conectividade entre fragmentos florestais em ambiente SIG

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influência do manejo de mamada sobre o retorno ao estro em ovelhas no pós-parto

Conduziu-se este estudo, com o objetivo de avaliar o retorno ao estro pós-parto de ovelhas submetidas a diferentes manejos de mamada. Foram utilizados 56 ovelhas Santa Inês e Bergamácia, 71 cordeiros e 3 rufiões. Os manejos de mamada (MM) foram: 1: contínua; 2: duas mamadas diárias; 3: mamada durante a noite. O período experimental foi dos 15 dias pós-parto até o desmame aos 60 dias. Até os 15, dias de idade os cordeiros permaneceram com suas mães em período integral. No MM 1, as ovelhas permaneceram com seus cordeiros em uma baia, em período integral. No MM 2, as ovelhas passaram a noite em uma baia e o dia em pastagem, momento em que não possuíam contato físico e visual com as crias. Seus cordeiros permaneceram em outra baia em período integral, para onde as ovelhas eram encaminhadas no momento da amamentação. No MM 3, as ovelhas passaram o dia em pastagem e a noite com seus cordeiros em uma baia, na qual os cordeiros permaneceram em período integral. Todas as ovelhas e todos os cordeiros receberam alimentação nas baias. Para identificação das ovelhas em estro foram utilizados rufiões, os quais permaneceram com elas em período integral. Os dados foram submetidos à análise de variância (PROC GLM, Sas®), e as médias comparadas por contrastes. O MM 2 possibilitou retorno ao estro pós-parto precoce quando comparado ao MM 3 e ao MM 1. Houve pouca ou nenhuma influência do anestro lactacional, pois 80% das ovelhas apresentaram estro durante a amamentação.

Desenvolvimento relativo dos tecidos ósseo, muscular e adiposo dos cortes da carcaça de cordeiros Santa Inês

O trabalho foi conduzido no Setor de Ovinocultura do Departamento de Zootecnia da UFLA, em Lavras, com o objetivo de estudar o crescimento alométrico dos tecidos ósseo, muscular e adiposo dos cortes comerciais em cordeiros. Foram utilizados 24 cordeiros machos inteiros da raça Santa Inês. Os animais foram submetidos a regime de confinamento e receberam alimentação ad libitum. O abate ocorreu quando os animais atingiram os pesos vivos de 15, 25, 35 e 45 kg. Após a carcaça ter sido limpa e resfriada, foram obtidos os cortes comerciais a partir da meia carcaça esquerda. A quantidade dos diferentes tecidos foram obtidos por intermédio da dissecação de perna, lombo, costeleta, costela/ fralda e paleta. O estudo do desenvolvimento relativo da composição tecidual foi feito por meio do modelo de HUXLEY (1932). Constatou-se crescimento heterogônico negativo (b < 1) para o tecido ósseo e heterogônico positivo (b > 1) para o tecido adiposo de todos os cortes. Quanto ao tipo de crescimento do tecido muscular da costela/fralda e paleta, foi verificado crescimento isogônico (b=1) deste tecido em relação aos cortes.

Crescimento alométrico dos tecidos ósseo, muscular e adiposo na carcaça de cordeiros Santa Inês e Bergamácia

O trabalho foi realizado com objetivo de realizar um estudo alométrico dos tecidos ósseo, muscular e adiposo na meia carcaça esquerda de cordeiros em crescimento. Foram utilizados 36 cordeiros machos inteiros, sendo 24 Santa Inês e 12 Bergamácia. Os animais foram confinados em gaiolas individuais e alimentados ad libitum. O abate ocorreu quando os animais atingiram os pesos vivos de 15, 25, 35 e 45 kg. Após a carcaça ter sido limpa e resfriada, foram obtidos os cortes comerciais a partir da meia carcaça esquerda. A quantidade dos diferentes tecidos foi obtida a partir da dissecação da perna, do lombo, da costeleta, costela/fralda e paleta. A quantidade total dos tecidos ósseo, muscular e adiposo foi obtida pela adição das quantidades de cada corte comercial. O estudo do desenvolvimento relativo da composição tecidual foi feito por meio do modelo de HUXLEY (1932). Constatou-se crescimento heterogônico negativo (b < 1) para o tecido ósseo, crescimento isogônico (b =1) para o tecido muscular e heterogônico positivo (b > 1) para a gordura, em relação ao peso da ½ carcaça.

SAXS study of crotapotin at low pH

The structure of crotapotin, a protein extracted from the venom of the Crotalus durissus terrificus, in solution at pH = 1.5, was studied by SAXS. The experimental results yield structural parameter values of the molecular radius of gyration R(g) = 13.6 angstrom, volume v = 16.2 x 10(3) angstrom3 and maximal dimension D(max) = 46 angstrom. The distance distribution function deduced from the scattering measurements is consistent with an overall molecular shape of an oblate ellipsoid of revolution with assymetry parameter nu = 0.45.

Immunomodulatory activities associated with beta-glucan derived from Saccharomyces cerevisiae

In this study we investigated the effect of beta-glucan derived from Saccharomyces cerevisiae on fungicidal activity, cytokine production and natural killer activity. Spleen and peritoneal cells from female C57BL/6 mice, previously injected (24 or 48 h) with 20 or 100 mu g of glucan by i.p. route, were assayed. In vivo mu-glucan administration primed spleen cells for a higher production of IL-12 and TNF-alpha when S. aureus was used as a stimulus. In addition, beta-glucan increased NK spleen cells activity against YAC target cells. Some immunomodulatory activities not yet described for beta-glucan were observed in this work.

Influence of ceramic surface conditioning and resin cements on microtensile bond strength to a glass ceramic

Statement of problem. It is not clear how different glass ceramic surface pretreatments influence the bonding capacity of various luting agents to these surfaces.Purpose. The purpose of this study was to evaluate the microtensile bond strength (mu TBS) of 3 resin cements to a lithia disilicate-based ceramic submitted to 2 surface conditioning treatments.Material and methods. Eighteen 5 X 6 X 8-mm ceramic (IPS Empress 2) blocks were fabricated according to manufacturer's instructions and duplicated in composite resin (Tetric Ceram). Ceramic blocks were polished and divided into 2 groups (n=9/treatment): no conditioning (no-conditioning/control), or 5% hydrofluoric acid etching for 20 seconds and silanization for 1 minute (HF + SIL). Ceramic blocks were cemented to the composite resin blocks with I self-adhesive universal resin cement (RelyX Unicem) or 1 of 2 resin-based luting agents (Multilink or Panavia F), according to the manufacturer's instructions. The composite resin-ceramic blocks were stored in humidity at 37 degrees C for 7 days and serially sectioned to produce 25 beam specimens per group with a 1.0-mm(2) cross-sectional area. Specimens were thermal cycled (5000 cycles, 5 degrees C-55 degrees C) and tested in tension at 1 mm/min. Microtensile bond strength data (MPa) were analyzed by 2-way analysis of variance and Tukey multiple comparisons tests (alpha=.05). Fractured specimens were examined with a stereomicroscope (X40) and classified as adhesive, mixed, or cohesive.Results. The surface conditioning factor was significant (HF+SIL > no-conditioning) (P<.0001). Considering the unconditioned groups, the mu TBS of RelyX Unicem was significantly higher (9.6 +/- 1.9) than that of Multilink (6.2 +/- 1.2) and Panavia F (7.4 +/- 1.9). Previous etching and silanization yielded statistically higher mu TBS values for RelyX Unicem (18.8 +/- 3.5) and Multilink (17.4 +/- 3.0) when compared to Panavia F (15.7 +/- 3.8). Spontaneous debonding after thermal cycling was detected when luting agents were applied to untreated ceramic surfaces.Conclusion. Etching and silanization treatments appear to be crucial for resin bonding to a lithia disilicate-based ceramic, regardless of the resin cement used.

A fast microwave-assisted, acid-vapor, steam-cleaning procedure for autosampler cups

A new and fast procedure is proposed for cleaning autosampler cups using acid-vapor steam-cleaning with a miniaturized assembly in a microwave-heated sealed Teflon vessel. A glass cactus-shaped holder was made to support six polyethylene autosampler cups (volume, 2.0 mt) inside a 100 mt microwave vessel. Regent-grade nitric acid was added to the vessels, and the system was heated in a microwave oven for 5 min at 300 W. Chromium was determined by graphite-furnace atomic-absorption spectrophotometry. The blank values were lower with cleaned cups compared to untreated cups (i.e., as received from supplier). The quantification limits, estimated from detection limits established with Milli-Q water, were 0.66 and 0.95 mu g Cr L-1 for cleaned and untreated auto-sampler cups, respectively. (C) 1998 Elsevier B.V. B.V. All rights reserved.

Transposable elements in Coffea (Gentianales : Rubiacea) transcripts and their role in the origin of protein diversity in flowering plants

Transposable elements are major components of plant genomes and they influence their evolution, acting as recombination hot spots, acquiring specific cell functions or becoming part of protein-coding regions. The latter is the subject of the present analysis. This study is a report on the annotation of transposable elements (TEs) in expressed sequences of Coffea arabica, Coffea canephora and Coffea racemosa, showing the occurrence of 383 ESTs and 142 unigenes with TE fragments in these three Coffea species. Based on selected unigenes, it was possible to suggest 26 putative proteins with TE-cassette insertions, demonstrating a likely contribution to protein variability. The genes for two of those proteins, the fertility restorer (FR) and the pyrophosphate-dependent phosphofructokinase (PPi-PFKs) genes, were selected for evaluating the impact of TE-cassettes on host gene evolution of other plant genomes (Arabidopsis thaliana, Oryza sativa and populus trichocarpa). This survey allowed identifying a FR gene in O. sativa harboring multiple insertions of LTR retrotransposons that originated new exons, which however does not necessarily mean a case of molecular domestication. A possible transduction event of a fragment of the PPi-PFK beta-subunit gene mediated by Helitron ATREPX1 in Arabidopsis thaliana was also highlighted.

New methods to quantify NH3 volatilization from fertilized surface soil with urea

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Using traditional heuristic algorithms on an initial genetic algorithm population applied to the transmission expansion planning problem

This paper analyses the impact of choosing good initial populations for genetic algorithms regarding convergence speed and final solution quality. Test problems were taken from complex electricity distribution network expansion planning. Constructive heuristic algorithms were used to generate good initial populations, particularly those used in resolving transmission network expansion planning. The results were compared to those found by a genetic algorithm with random initial populations. The results showed that an efficiently generated initial population led to better solutions being found in less time when applied to low complexity electricity distribution networks and better quality solutions for highly complex networks when compared to a genetic algorithm using random initial populations.

FISH using a gag-like fragment probe reveals a common Ty3-gypsy-like retrotransposon in genome of Coffea species

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)