Experimental study of a methodology for Fission-track Dating without neutron irradiation

To carry out the dating by the Fission Track Method (FTM) the international community that works with this method employs methodologies in which the mineral to be dated must be irradiated with neutrons. Such irradiation, performed in a nuclear reactor, demand a relatively long waiting time so that the activity of the sample attain a proper level for handling. The present work aims to establish a methodology that makes possible the dating by FTM using a mass spectrometer instead of a nuclear reactor. This methodology was applied to apatite samples from Durango, Mexico. © 2009 Elsevier Ltd. All rights reserved.

Molecular Dynamics simulations of track formation at different ensembles

A series of Molecular Dynamics simulations of thermal spikes has been run in zircon. For two different ensembles: microcanonical one and a combination of microcanonical one acting on the simulation core with Langevin one on the side walls of simulation. Depending on the used ensemble, different track-formation threshold energies were found. When the combined ensemble is carried out, the total energy of the simulations varies with the temperature which can influence how annealing fission-track models should deal with the lattice recovery. A fission-track annealing model is tested with the simulation results. © 2012 Elsevier Ltd. All rights reserved.

Extrapolation of zircon fission-track annealing models

One of the purposes of this study is to give further constraints on the temperature range of the zircon partial annealing zone over a geological time scale using data from borehole zircon samples, which have experienced stable temperatures for ∼1 Ma. In this way, the extrapolation problem is explicitly addressed by fitting the zircon annealing models with geological timescale data. Several empirical model formulations have been proposed to perform these calibrations and have been compared in this work. The basic form proposed for annealing models is the Arrhenius-type model. There are other annealing models, that are based on the same general formulation. These empirical model equations have been preferred due to the great number of phenomena from track formation to chemical etching that are not well understood. However, there are two other models, which try to establish a direct correlation between their parameters and the related phenomena. To compare the response of the different annealing models, thermal indexes, such as closure temperature, total annealing temperature and the partial annealing zone, have been calculated and compared with field evidence. After comparing the different models, it was concluded that the fanning curvilinear models yield the best agreement between predicted index temperatures and field evidence. © 2012 Elsevier Ltd. All rights reserved.

Zircon fission track and U-Pb dating methods applied to São Paulo and Taubaté Basins located in the southeast Brazil

Zircon samples from the Cenozoic São Paulo and Taubaté Basins and Mantiqueira Mountain Range (southeast Brazil) were concomitantly dated by zircon Fission Track Method (FTM) and in situ U-Pb dating method. While FTM detrital-zircon data are ideally used to provide low-temperature information, U-Pb single detrital grain ages record the time of zircon formation in igneous or high grade metamorphic environments. This methodology may be used to study the possible sources of the basins sediments. The results suggest that the São Paulo Basin is composed of sediments from just one source, the Mantiqueira Mountain Range. On the other hand, the Taubaté Basin presents further sediment sources besides the Mantiqueira Mountain Range. © 2012 Elsevier Ltd. All rights reserved.

Plant-derived essential oils affecting settlement and oviposition of Bemisia tabaci (Genn.) biotype B on tomato

The silverleaf whitefly Bemisia tabaci (Genn.) biotype B (Hemiptera: Aleyrodidae) is an economically important pest of tomatoes Solanum lycopersicum (L.), causing irregular ripening on fruits and transmitting several plant pathogenic geminiviruses. The management of this pest is commonly based on repetitive spraying with synthetic pesticides, causing serious environmental damages and increase of resistance by insect population. In the present study, essential oils from the leaves of Artemisia camphorata Vill., Ageratum conyzoides L., Foeniculum vulgare Mill., Lippia alba (Mill.) N. E. Br., Plectranthus neochilus Schltr., and Tagetes erecta L. were investigated for their possible repellent and oviposition-deterrent effects against B. tabaci biotype B on tomato. In a multi-choice assay, P. neochilus essential oil was the most active repellent and oviposition deterrent. Essential oils of A. conyzoides and T. erecta significantly deterred the female B. tabaci biotype B from laying eggs on treated tomato leaflets compared with the control. (E)-Caryophyllene (30.67 %) and the monoterpenes α-pinene (15.02 %) and α-thujene (11.70 %) were identified as the major constituents of the essential oil of P. neochilus. Our findings demonstrated the potential of essential oil of P. neochilus and other oils in the reduction of settlement and oviposition of B. tabaci biotype B on tomato. © 2012 Springer-Verlag Berlin Heidelberg.

Further investigation of the initial fission-track length and geometry factor in apatite fission-track thermochronology

The external detector method (EDM) is a widely used technique in fission track thermochronology (FTT) in which two different minerals are concomitantly employed: spontaneous tracks are observed in apatite and induced ones in the muscovite external detector. They show intrinsic differences in detection and etching properties that should be taken into account. In this work, new geometry factor values, g, in apatite, were obtained by directly measuring the ρed/ρis ratios and independently determined [GQR]ed/is values through the measurement of projected lengths. Five mounts, two of which were large area prismatic sections and three samples composed of random-orientation pieces have been used to determine the g-values. A side effect of applying EDM is that the value of the initial confined induced fission track, L0, is not measured in routine analyses. The L 0-value is an important parameter to quantify with good confidence the degree of annealing of the spontaneous fission tracks in unknown-age samples, and is essential for accurate thermal history modeling. The impact of using arbitrary L0-values on the inference of sample thermal history is investigated and discussed. The measurement of the L0-value for each sample to be dated using an extra irradiated apatite mount is proposed. This extra mount can be also used for determining the g value as an extension of the ρed/ρis ratio method. Eight apatite samples from crystalline basement, with grains at random orientation, were used to determine the g-values. The results found are statistically in agreement with the values found for apatite samples (from Durango, Mexico) measured in prismatic section and also measured at random orientation. There was no observable variation in efficiency regarding crystal orientation, showing that it is relatively safe using non-prismatic grains, especially in samples with paucity of grains, as it is the case of most basin samples. Implications for the ζ-calibration and for the calibration of the direct (spectrometer-based) fission-track dating are also discussed.

Evolution of the South Atlantic passive continental margin in southern Brazil derived from zircon and apatite (U-Th-Sm)/He and fission-track data

The area between São Paulo and Porto Alegre in southeastern Brazil plays a key area to understand and quantify the evolution of the South Atlantic passive continental margin (SAPCM) in Brazil. In this contribution, we present new thermochronological data attained by fission-track and (U-Th-Sm)/He analysis on apatites and zircons from metamorphic, sedimentary and intrusive rocks. The zircon fission-track ages range between 108.4 (15.0) and 539.9 (68.4). Ma, the zircon (U-Th-Sm)/He ages between 72.9 (5.8) and 525.1(2.4). Ma, whereas the apatite fission-track ages range between 40.0 (5.3) and 134.7 (8.0). Ma, and the apatite (U-Th-Sm)/He ages between 32.1 (1.5) and 93.0 (2.5). Ma. The spatial distribution of these ages shows three distinct blocks with a different evolution cut by old fracture zones. While the central block exhibits an old stable block, the Northern and especially the Southern block underwent complex post-rift exhumation. The sample of the Northern block shows two distinct cooling phases in the Upper Cretaceous and the Paleogene to Neogene. After sedimentation of the Permian sandstones the samples of the Central block were never heated up over 100. °C with a following moderate to fast cooling phase in Cretaceous to Eocene time and a fast cooling between Oligocene to Miocene. The five thermal models obtained in the Southern block indicate a complex evolution with three cooling phases. The exhumation events of the three blocks correspond with the Paraná-Etendekka event, the alkaline intrusions due to the Trinidad hotspot, and the evolution of the continental rift basins in SE Brazil and are, therefore, most likely to be the major force for the post-rift evolution of the passive continental margin in SE Brazil, which therefore corresponds to the three main phases of the Andean orogeny. © 2013 Elsevier B.V.

Using phenological cameras to track the green up in a cerrado savanna and its on-the-ground validation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Raman Spectroscopy and Scanning Electron Microscopy Characterizations of Fission Track Method Datable Zircon Grains

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Differentiation of deer species of the genus Mazama by track morphometry

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Description and performance of track and primary-vertex reconstruction with the CMS tracker

A description is provided of the software algorithms developed for the CMS tracker both for reconstructing charged-particle trajectories in proton-proton interactions and for using the resulting tracks to estimate the positions of the LHC luminous region and individual primary-interaction vertices. Despite the very hostile environment at the LHC, the performance obtained with these algorithms is found to be excellent. For t (t) over bar events under typical 2011 pileup conditions, the average track-reconstruction efficiency for promptly-produced charged particles with transverse momenta of p(T) > 0.9GeV is 94% for pseudorapidities of vertical bar eta vertical bar < 0.9 and 85% for 0.9 < vertical bar eta vertical bar < 2.5. The inefficiency is caused mainly by hadrons that undergo nuclear interactions in the tracker material. For isolated muons, the corresponding efficiencies are essentially 100%. For isolated muons of p(T) = 100GeV emitted at vertical bar eta vertical bar < 1.4, the resolutions are approximately 2.8% in p(T), and respectively, 10 m m and 30 mu m in the transverse and longitudinal impact parameters. The position resolution achieved for reconstructed primary vertices that correspond to interesting pp collisions is 10-12 mu m in each of the three spatial dimensions. The tracking and vertexing software is fast and flexible, and easily adaptable to other functions, such as fast tracking for the trigger, or dedicated tracking for electrons that takes into account bremsstrahlung.

Aplicação de técnicas de geoprocessamento para a avaliação da expansão urbana no municípo de Duque de Caxias (RJ) como subsídio ao monitoramento de dutos: trecho da faixa de dutos Rio de Janeiro - Belo Horizonte

Different forms of human pressure may occur in the pipeline ranges, due to the large extensions and various configurations of land use, which can pass through the pipelines. Due to the dynamics of these pressures, it is necessary to monitor temporal changes of land use and cover the surface. Under this theme, appears as extremely important to use products and techniques of remote sensing, as they allow the identification of objects of the land surface that may compromise the security and monitoring of the pipeline, and allows the extraction of information conditions on land use at different periods of time. Based on the above, this paper aims to examine in a temporal approach, the process of urban expansion in the municipality of Duque de Caxias, located on the outskirts of the metropolitan area of the state of Rio de Janeiro, as well as settlement patterns characteristic of areas that the changes occurred in the period 1987 to 2010. We used the technique of visual analysis to perform the change detection and the technique of image classification, aimed at monitoring human pressure over a stretch of track pipeline Rio de Janeiro - Belo Horizonte, located in the state of Rio de Janeiro. The stages of work involved the characterization of the study area, urban sprawl and the existing settlement patterns, through the analysis of bibliographic data. The processing of Landsat 5 images and the application of the technique of change detection were performed in three scenes for the years 1987, 1998 and 2010, while the classification process was performed on the image RapidEye for the year 2010. Can be noted an increase in urban area of approximately 22.38% and the change of land cover from natural to built. This growth is concentrated outside to the area of direct influence of the duct, occurring in the area of indirect influence of the enterprise. Regarding the settlement patterns of growth areas, it was observed that these are predominantly

O centenário da ferrovia brasileira (1954): ensaio sobre a elabo-ração da memória ferroviária no Brasil

In 1954, it was celebrated the centenary of railways in Brazil. The date refers to the first section of 14.5 km of railway in Brazil (30/04/1854), in Rio de Janeiro, between Mauá and Fragoso, of the Petropolis Railway Company (Estrada de Ferro Petrópolis). Some of the texts and commemorative events indicated the symbolic values that the railroad took in the Brazilian history. Firstly, on 30.04.1954, the railway section Mauá-Fragoso and steam locomotive “Baroness” (the first used on the track) were declared national monuments(Decree No. 35,447-A, April 30, 1954). Secondly, some entities (Clube de Engenharia, Conselho Nacional de Geografia, Ministério da Viação e Obras Públicas) highlighted the importance of celebrating the Brazilian railway history and its historical significance, economic and geographical. For this, some events was occurred (the commemoration of one hundred years in Rio de Janeiro and Recife on 30.04.1954). Among the texts wrought produced, we highlight the text I Centenary of Brazilian Railroad (1954), released by the Brazilian Institute of Geography and Statistics (Instituto Brasileiro de Geografia e Estatística), and the National Council of Geography (Conselho Nacional de Geografia). The emphasis given to the railway refersto the geographical perspective (territorial expansion), but also makes mention of the Barãode Mauá, the founder of Petropolis Railway Company. We aim to understand the celebration from evocations about the Brazilian railroad history and some ideas that is assigned to the railway (and the Barãode Mauá), and railway heritage (the track and the locomotive “Baroneza”). On basis of this review will seek to understand how it was reconceived the railroad memory in view of these values and material elements.

Alteração da fertilidade do solo como indicador do processo de antropização e presença de atividades não agrícolas no assentamento rural Horto Aimorés, municípios de Bauru e Pederneiras/SP =: Change of soil fertility as an indicator of the anthropization process and presence of non agricultural activities at the rural settlement Horto Aimorés, cities of Bauru and Pederneiras/ SP

Pós-graduação em Geografia - FCT

Effects of railway track vibration induced by passing trains on an energy harvesting device

Pós-graduação em Engenharia Mecânica - FEIS