Contribuições da CADES para a Educação (Matemática) Secundária no Brasil: uma Descrição da Produção Bibliográfica (1953-1971)

The so called Campaign for the Improvement and Diffusion of High School (in Portuguese, CADES) took place between 1953 and 1971, in Brazil. During this period, the Campaign published or helped publish dozens of books, in different teaching areas, and several of them were located by the authors of this article. These books guided high school teachers with respect to curriculum planning, legal aspects and methods of teaching. In this article, we contextualize historically this Campaign and also mention its objectives. We briefly describe some of the books found - especially those related to the teaching of mathematics - in order to open perspectives for future approaches and research that can be done based on this written material. Our main aim is to discuss its orientations and to provide ingredients that enable the construction of considerations related to this perspective of training mathematics teachers during a period when there were few colleges and universities to prepare teachers in Brazil.

Contato corporal entre adolescentes através da dança de salão na escola

The objective of this study was to identify the reaction and perception of adolescents in relation to body contact as well as emotional expressions through ballroom dancing. Forty-two adolescents from a public elementary school in the state of São Paulo participated in the study. Data gathering was conducted in groups by filming the ballroom dance class and applying a questionnaire about the experience. The dance experience was observed to provide greater body proximity and demonstration of affection, since part of the participants reported well-being, while others reported being embarrassed by dancing with a partner from the opposite sex. It was concluded that more dance activities related to biopsychosocial development need to be offered at school since ballroom dancing can help in interaction promoting body contact and thus facilitate in the process of interpersonal relations between adolescents.

Avaliação de Interações entre Professor e Alunos na Educação Matemática: ensino e aprendizagem de recursos pedagógicos

The aim of this paper is to discuss the teachers' need, as autonomous professionals, to evaluate their own pratice. Considering that Descriptive Functional Analysis (DFA) may be a pedagogical method for analysis, implementation, and change of teachers' mathematics teaching practices, the objective of the present research was to teach repertoires compatible with DFA to two mathematics teachers in elementary schools of São Paulo state. When teachers are responsible for evaluation and self evaluation, they recognize themselves as fundamental agents of transformation in education.

Optimisation of environmental gas cleaning routes for solid wastes cogeneration systems. Part II - Analysis of waste incineration combined gas/steam cycle

In the first paper of this paper (Part I), conditions were presented for the gas cleaning technological route for environomic optimisation of a cogeneration system based in a thermal cycle with municipal solid waste incineration. In this second part, an environomic analysis is presented of a cogeneration system comprising a combined cycle composed of a gas cycle burning natural gas with a heat recovery steam generator with no supplementary burning and a steam cycle burning municipal solid wastes (MSW) to which will be added a pure back pressure steam turbine (another one) of pure condensation. This analysis aims to select, concerning some scenarios, the best atmospheric pollutant emission control routes (rc) according to the investment cost minimisation, operation and social damage criteria. In this study, a comparison is also performed with the results obtained in the Case Study presented in Part I. (c) 2007 Elsevier Ltd. All rights reserved.

Labor analgesia with ropivacaine added to clonidine: a randomized clinical trial

CONTEXTO E OBJETIVO: A associação entre ropivacaína e clonidina agiria menos que a ropivacaína isolada na mãe e no feto? Foram pesquisados os efeitos materno-fetais de duas técnicas farmacológicas: pequena dose de ropivacaína ou dose menor de ropivacaína mais clonidina na analgesia peridural para parto. TIPO DE ESTUDO E LOCAL: Estudo prospectivo, Departamento de Anestesiologia, Faculdade de Medicina de Botucatu, Universidade Estadual Paulista. MÉTODOS: Trinta e duas parturientes, estado físico de acordo com a American Society of Anesthesiologists I e II, foram aleatoriamente submetidas à analgesia peridural com 15 ml de ropivacaína 0,125% (grupo R) ou 15 ml de ropivacaína 0,0625% mais clonidina, 75 µg (grupo RC). Foram avaliados: intensidade da dor, nível do bloqueio sensitivo, latência, intensidade do bloqueio motor, duração da analgesia de parto e da analgesia peridural. Os neonatos foram avaliados pelo Apgar e método de Amiel-Tison (capacidade neurológica e adaptativa). RESULTADOS: Não houve diferenças significativas entre grupos para dor, nível de bloqueio sensitivo, duração da analgesia peridural e Apgar. Para latência, duração da analgesia de parto e bloqueio motor, grupo R < grupo RC. O escore da capacidade neurológica e adaptativa de meia e duas horas foi maior para o grupo R. Cem por cento dos neonatos do grupo R e 75% dos do grupo RC estavam neurologicamente saudáveis ao exame de 24 horas. CONCLUSÃO: Pequena dose de ropivacaína e dose menor mais clonidina aliviaram a dor materna durante o parto. Neonatos de mães que receberam apenas ropivacaína mostraram melhores escores da capacidade neurológica e adaptativa.

MUSCLE MASS GAIN AFTER RESISTANCE TRAINING IS INVERSELY CORRELATED WITH TRUNK ADIPOSITY GAIN IN POSTMENOPAUSAL WOMEN

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Bioimpedance in Pregnant Women with Preeclampsia

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Prevalência e fatores de risco para transtornos mentais comuns entre estudantes de medicina

OBJETIVO: Estimar a prevalência de transtornos mentais comuns entre estudantes de medicina e respectivos fatores de risco. MÉTODOS: Estudo transversal realizado com 551 universitários de um curso de medicina de Botucatu, SP. Utilizou-se questionário auto-aplicável investigando aspectos sócio demográficos, relacionados ao curso e o Self Reporting Questionnaire. Para análise dos dados empregaram-se os testes de qui-quadrado e regressão logística. RESULTADOS: Participaram 82,6% dos alunos matriculados no curso, predominando mulheres (61%), jovens (60% 20-23 anos), procedentes de outros municípios (99%). A prevalência de transtornos mentais comuns foi de 44,7% associando-se independentemente a: dificuldade para fazer amigos (RC=2,0), avaliação ruim sobre desempenho escolar (RC=1,7), pensar em abandonar o curso (RC=5,0), não receber o apoio emocional de que necessita (RC=4,6). Embora na primeira análise a prevalência tenha se mostrado associada ao ano do curso, esta associação não se manteve na análise multivariada. CONCLUSÕES: A prevalência de transtornos mentais comuns mostrou-se elevada entre os estudantes de medicina, associando-se a variáveis relacionadas à rede de apoio. As experiências emocionalmente tensas como o contato com pacientes graves, formação de grupos, entre outras, vividas nos últimos anos do curso, são provavelmente potentes estressores, especialmente para sujeitos com uma rede de apoio considerada deficiente. Sugere-se que instituições formadoras estejam atentas a esse fato, estabelecendo intervenções voltadas ao acolhimento e ao cuidado com o sofrimento dos estudantes.

Follicular Development in Ewes During Natural and Prostaglandins Induced Estrous Cycle

The follicular development was evaluated in ovine females during natural and prostaglandin-F(2 alpha) (PG) induced estrous cycle. Ewes were randomly divided in two treatments (n=7/treatment): T1 with natural cycle and T2 synchronized with two injections of PG. From one day before PG injection until next ovulation, daily transrectal ultrasonography was done. All follicles >= 2 mm were assessed. During the interovulatory intervals, follicular growth and regression occurred in a wave like pattern (2-3 waves). The maximum diameter of the largest follicle of the first wave was greater in T1 (5.83 +/- 0.31 mm) compared with T2 (5.0 +/- 0.1 mm; P<0.01), but there was no significant difference among the emergency day of largest follicle, during the growth phase of the follicular waves. The duration of the plateau phase in wave 2 differed between the two treatments (P<0.05) showing 0.83 +/- 0.31 and 1.83 +/- 0.17 d, for natural and synchronized treatment, respectively. Growth rate did not differ between treatments. Presence of new luteal tissue was detected on day 3 after ovulation. In conclusion, the follicular development was similar in female ovine during natural and PG induced estrous cycle.

The influence of temperature of three adhesive systems on bonding to ground enamel

This study evaluated the microtensile bond strength test (mu T), micromorphology of resin-enamel interface (RET) and etching patterns (EP) promoted by the etch-and-rinse adhesive, Prime&Bond NT (PB), and two self-etching adhesives, Clearfil SE Bond (SE) and Adper Prompt L-Pop (APR), to ground bovine enamel surfaces' when applied at temperatures of 5 degrees C (C), 40 degrees C (H) and 20 degrees C (R). Materials and Methods. Sixty-three bovine incisors were randomly divided into nine experimental groups (n=7) according to adhesive systems and temperatures. The buccal enamel surfaces were flattened with 600-grit SiC paper and abraded with a diamond bur under water-cooling. The adhesive systems were applied according to the manufacturer's instructions. After the restorative procedures, the specimens were sectioned into five slabs. Four slabs were prepared for mu T and one for interface analysis. For etching pattern analysis, the remaining 16 bovine enamel fragments were used (n=2). The adhesives were applied and the surfaces were rinsed with organic solvents after application. The specimens for RET and EP analysis were prepared for SEM analysis. Results. No significant differences among the adhesives were found at R temperature. However, at 5 degrees C, PB and APR presented lower bond strength than SE. At H temperature, higher bond strength was observed for PB than for APR and SE. At C and H temperature, formation of the interdiffusion zone was impaired and the treated enamel surfaces presented an undefined EP.

Water deprivation-induced sodium appetite and differential expression of encephalic c-Fos immunoreactivity in the spontaneously hypertensive rat

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influence of Er,Cr: YSGG laser on bond strength of self-adhesive resin cement

The purpose of this study was to investigate the bond strength of fiber post previously laser treated root canals. Forty single-rooted bovine teeth were endodontically treated, randomly and equally divided into two main groups according to the type of pretreatment: G1: 2.5% NaOCl (control group); and G2: Er,Cr:YSGG laser. Each group was further subdivided into 2 groups based on the category of adhesive systems/ luting materials used: a: an etch-and-rinse resin cement (Single Bond/RelyX ARC; 3M ESPE), and b: a self-adhesive resin cement (Rely X Unicem; 3M ESPE). Three 1.5 mm thick slabs were obtained per root and the push-out test was performed at a crosshead speed of 0.5 mm/min until post dislodgement occurred. Data were analyzed by ANOVA and post-hoc Tukey's test at a pre-set alpha of 0.05. Analysis of variance showed no statistically significant difference (p > 0.05) among the groups G1a (25.44 ± 2.35) and G1b (23.62 ± 3.48), G2a (11.77 ± 2.67) and G2b (9.93 ± 3.37). Fractures were observed at the interface between the dentin and the resin in all groups. The Er,Cr:YSGG laser irradiation did not influence on the bond strength of the resin cements and the etch-and-rinse resin cement had better results on bond strength than self-adhesive resin cement.

Effect of compression load and temperature on thermomechanical tests for gutta-percha and Resilon (R)

Tanomaru-Filho M, Silveira GF, Reis JMSN, Bonetti-Filho I, Guerreiro-Tanomaru JM. Effect of compression load and temperature on thermomechanical tests for gutta-percha and Resilon (R). International Endodontic Journal, 44, 1019-1023, 2011.Aim To analyse a method used to evaluate the thermomechanical properties of gutta-percha and Resilon at different temperatures and compression loads.Methodology Two hundred and seventy specimens measuring 10 mm in diameter and 1.5 mm in height were made from the following materials: conventional gutta-percha (GCO). thermoplastic gutta-percha (GTP) and Resilon (R) cones (RE). After 24 h, the specimens were placed in water at 50 degrees C. 60 degrees C or 70 degrees C for 60 s. After that, specimens were placed between two glass slabs, and loads weighing 1.0, 3.0 or 5.0 kg were applied. Images of the specimens were digitized before and after the test and analysed using imaging software to determine their initial and final areas. The thermomechanical property of each material was determined by the difference between the initial and final areas of the specimens. Data were subjected to ANOVA and SNK tests at 5% significance. To verify a possible correlation between the results of the materials, linear regression coefficients (r) were calculated.Results Data showed higher flow area values for RE under all compression loads at 70 degrees C and under the 5.0 kg load at 60 degrees C (P < 0.05). Regarding gutta-percha, GTP showed higher flow under loads weighing 3.0 and 5.0 kg. at 60 and 70 degrees C (P < 0.05). GCO presented higher flow at 70 degrees C with a load of 5.0 kg. Regression analyses showed a poor linear correlation amongst the results of the materials under the different experimental conditions.Conclusion Gutta-percha and Resilon (R) cones require different compression loads and temperatures for evaluation of their thermomechanical properties. For all materials, the greatest flow occurred at 70 degrees C under a load of 5.0 kg: therefore. these parameters may be adopted when evaluating endodontic tilling materials.

Evaluation of the thermoplasticity of gutta-percha and Resilon (R) using the Obtura II System at different temperature settings

Aim To analyse the thermoplasticity of several endodontic filling materials using the Obtura II System at different temperature settings.Methodology The following materials based on gutta-percha: Regular Obtura (OBT), Obtura Flow 150 (OBT F), Endo Flow (EDF), Odous (ODO) and the synthetic thermoplastic polymer material Resilon (RE) were heated using the Obtura II System at three temperature settings (140, 170 and 200 degrees C). Samples of the heated materials were placed on the sensor of a digital thermometer (THR-140; Instrutherm, São Paulo, Brazil) to determine their real temperature (RT) when the system was set at 140 degrees C (from 64.5 to 69 degrees C), 170 degrees C (from 73.8 to 77.5 degrees C) and 200 degrees C (from 83.6 degrees C for EDF and 100 degrees C for RE). Specimens (n = 30) were made by placing samples of each material in metallic ring moulds and compressing them between two glass slabs. After 24 h, specimens (n = 10) were heated at the different settings (RT) and submitted to compression under a 5-kg load. Plasticization was assessed by calculating the differences between the post-compression and initial diameters of each specimen. Data were submitted to ANOVA and Tukey's test at 5% significance.Results At 140 degrees C, Obtura Flow presented the highest thermoplasticity values and Regular Obtura, the lowest. At 170 degrees C, Obtura Flow and Resilon demonstrated greater plasticization. Resilon had the highest mean thermoplasticity values at 200 degrees C.Conclusions Thermoplasticity values were influenced both by the temperature settings on the Obtura II System and by the type of material analysed. Obtura Flow and Resilon had the highest mean thermoplasticity values.

EFFECTS of CREATINE SUPPLEMENTATION DURING RESISTANCE TRAINING on MYOSIN HEAVY CHAIN (MHC) EXPRESSION IN RAT SKELETAL MUSCLE FIBERS

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)