Agregação de um latossolo vermelho submetido a cinco sistemas de preparo do solo em Uberaba - MG

Visando à obtenção de dados relativos aos efeitos de sistemas de preparo periódico do solo e sua relação com a degradação do solo e a capacidade de incorporação de resíduos, avaliaram-se a distribuição percentual de agregados do solo, o diâmetro médio geométrico, o módulo de finura e a incorporação de resíduos, durante o ano agrícola de 2001-2002. A área em estudo foi classificada como Latossolo Vermelho distrófico, localizada no município de Uberaba - MG. Utilizou-se do delineamento estatístico em blocos casualizados com quatro repetições, tendo como tratamentos o preparo periódico primário do solo com o escarificador, enxada rotativa, arado de aivecas, grade aradora e arado de discos. As análises dos resultados mostraram a enxada rotativa e a grade aradora como os equipamentos mais agressivos à estrutura do solo. O escarificador e a enxada rotativa apresentaram menor capacidade de incorporação dos resíduos vegetais. O escarificador manteve maior cobertura vegetal e maior grau de agregação do solo.

Desempenho de um trator em função do tipo de pneu, da lastragem e da velocidade de trabalho

O trabalho comparou o desempenho de um trator agrícola 4x2 TDA de 89 kW (121cv) em função do tipo de pneus (radial, diagonal e de baixa pressão), a condição de lastragem (com e sem água nos pneus) e quatro velocidades [V1 (1,84km h-1), V2 (3,18km h-1, V3 (4,57km h-1), V4 (5,04km h-1)]. O experimento foi realizado na UNESP-Jaboticabal-SP, em condição de preparo do solo com escarificador de sete hastes a 30cm de profundidade. Os pneus foram do tipo R1, com as seguintes características: [radial (dianteiros-14.9 R 26; traseiros-620/75 R 30) diagonal (dianteiros-14.9-26, traseiros-23.1-30) e BPAF (dianteiros-500/60-26.5; traseiros-700/55-34)]. O delineamento experimental foi blocos casualizados, em esquema fatorial 3x2x4, com 24 tratamentos e três repetições. Os resultados evidenciaram vantagens para o trator equipado com pneus radiais.

Carbon dioxide emissions after application of tillage systems for a dark red latosol in southern Brazil

Soil tillage may influence CO2 emissions in agricultural systems. Agricultural soils are managed in several ways in Brazil, ranging from no tillage to intensive land preparation. The objective of this study was to determine the effect of common soil tillage treatments (disk harrow, reversible disk plow, rotary tiller and chisel plow tillage systems) on the intermediate CO2 emissions of a dark red latosol, located in southern Brazil. Different tillage systems produced significant differences in the CO2 emissions, and the results indicate that the chisel plow produced the highest soil carbon loss during the 15 days period after tillage treatments were performed. Emissions to the atmosphere increased as much as 74 g CO2 m(-2), at the end of a 2-week period, in the plot where the chisel plow treatment was applied, in comparison to the non-disturbed plot. The results indicate that the total increase on the intermediate term soil CO2 emissions due to tillage treatments in southern Brazil is comparable to that reported for the more humid and cooler regions. (C) 2001 Elsevier B.V. B.V All rights reserved.

Fontes de potássio não trocável e potássio total em quatro solos do Estado do Ceará

The mineralogical composition of the soil plow layer (0-20 cm) was analyzed for the following soil suborders (according to the Brazilian soil taxonomy): Neossolo Quartzarênico. Argissolo Vermelho-Amarelo, Cambissolo Háplico and Latossolo Vermelho-Amarelo which samples were collected from different regions of the Ceará State. The present study had the objectives of identifying potential sources of both total and non-exchangeable potassium forms for plants located at the different soil fractions. Then highest content of K occurred in the Cabissolo Háplico soil, including both the total and non-exchangeable K forms. In the Neossolo Quartzarênico. Argissolo Vermelho-Amarelo and Latossolo Vermelho-Amarelo, the highest contents of both forms of potassium were impregnated at the sand fraction. The amount of potassium found in the both sand and silt fractions has its origin in the orthoclase mineral which was detected in the mineralogical analysis. In the clay fractio, the origin of the potassium is illite and a inter-stratified mineral (mica+montmorillonite). As compared with the total content, the amount of non-exchangeable potassium is low for all the four soils. It was more concentrated at clay fraction of the Cambissolo soil. The potassium content sequence in the soil was the following: Cambissolo Háplico > Argissolo Vermelho-Amarelo > Neossolo Quartzarênico > Latossolo Vermelho-Amarelo. The results showed that the distribution of the forms of potassium among the soils differ as a function of the nature of the dominating minerals detected in the mineralogical analysis (illite and orthoclase) which was discussed above.

Variaciones del índice de cono en suelo movilizado posterior al tráfico de un tractor equipado con dos tipos de neumáticos y a cuatro velocidades de desplazamiento

The tractor is one of the machines that more traffics over the soil during the processes involving agricultural production. The interaction tractor/soil is made by the tires which, in most of the cases, are pneumatic. The tire type and the tractor travel speed, interfere directly on the pressure over the soil. One of the techniques employed to evaluate the alterations that tractor traffic causes in the soil is to measure its Cone Index. The aim of this research was to evaluate the same Cone Index alterations caused by an agricultural tractor equipped with both radial tires and bias ply tires, trafficking mobilized soil in four different travel speeds. The experiment was performed in a LATOSSOLO VERMELHO, located 22°51' S, 48°25'W and 770 m of altitude, in Botucatu-SP, Brazil. The soil mobilization was performed with a chisel plow and a disc arrow. The traction was accomplished with a John Deere tractor, model 6600, with 88 kW of power and 6,723 kg. Equipment requiring a force of 25kN was traced by the tractor draw bar. The experimental design was in randomized blocks with 4 × 2 factorial arrangements, with two distinct treatments corresponding to the types of tires (bias and radial) and the four travel speeds, with six replications. There were selected the following speeds: 3.5, 3.9, 5.1 and 5.9 km h-1. To determine the soil resistance, there was utilized MSSU - Mobile Soil Sampling Unit, with which the Cone Index was obtained in layers from 0-100, 100-200, 200-300, 300-400, 400-500 and over 500 mm deep. The Cone Index where evaluated in areas with non contact between tire and soil (ICn) and in the tire footprint track (ICp). There were calculated the Cone Index increments caused by the tractor tire (AIC) and the results showed that as the tractor travel speed increased, there were observed decrements in the medium values of cone index. The radial tire provided smaller values of the Cone Index in the superficial layer of the soil (0 to 100 mm) in relation to the bias ply tire, when the speed was approximately 6 km h-1. The increment in the Cone Index, promoted by the tractor, was more intense in the first 200 mm depth, but it also reached the layer from 200 to 300 mm.

Custos e rentabilidade do milho em função do manejo do solo e da adubação nitrogenada

Agronomic practices that help farmers to raise yield and reduce costs must be studied to ensure agricultural sustainability. Thus, the objective of this study was to analyze economically the effect of soil management and nitrogen fertilization in maize crops. Treatments consisted of a combination of 3 soil management techniques (plow harrows + floating harrows, chisel + floating harrows, and no-tillage), 5 periods of nitrogen fertilization (control - 0 kg ha -1 N; 120 kg ha -1 after sowing (S); 120 kg ha -1 in the V 6 stage; 30 kg ha -1 (S) + 90 kg ha -1 in V 6; 30 kg ha -1 (S) + 45 kg ha -1 in V 4 + 45 kg ha -1 in V 8 The total operating cost (TOC), gross revenue (GR), operating profit (OP), profitability index (PI), break-even yield, and break-even price were estimated. It was concluded that the no-tillage system, after 11 years of management, associated with nitrogen fertilization promotes positive PI and OP, being useful to farmers.

Restoration of a degraded area using soil tillage systems in Campinas, São Paulo, Brazil

In Brazil the intensive agriculture use, mainly pasture, is the main cause of the presence of extensive areas of degraded lands. This study aimed to assess the impact of different soil management practices in a pasture degraded area used as garbage disposal. The experiment was performed at the Faculdade de Engenharia Agrícola, Universidade Estadual de Campinas - UNICAMP, in Campinas, state of São Paulo, Brazil, from 1990 to 1996. This area has undergone a process of recovery through removal of trash deposited on the surface, in 1985, levelling of soil, followed by application of limestone, subsoiling, planting of legumes (Crotalaria juncea) and crop rotation (soybean and maize). Since 1990 only popcorn maize was grown and established plots managed with different soil tillage systems, including harrow, chisel plow, moldboard plow, no tillage, disk plow and revolving hoe. One plot was planted exclusively with guinea grass (Panicum maximum) to serve as a reference for minimum loss of soil and another grown on a downhill direction to correspond to the expected maximum erosion. There were differences in sediment loss, nutrient loss and productivity of the popcorn maize in the period analyzed. The chisel plow and no tillage treatments caused the slightest loss of soil and nutrients, compared to other tillage systems. The results show that the soil management systems influenced the physical and chemical characteristics of soil, allowing an economical and environmental recovery of the area, providing the conditions for grain agricultural production.

Porosidade e infiltração de água do solo sob diferentes sistemas de manejo

Management systems affect soil structure, causing changes in porosity that can influence water infiltration into the soil. This study aimed to evaluate the effect of different management systems on the porosity and water infiltration in Distroferric Red Nitosol with clay texture. The management systems were: conventional with disc plow + two soft harrowing, conventional with heavy disc harrow + two soft harrowing, no tillage and fallow. The following attributes: porosity, pore shape and water infiltration velocity into the soil were determined. Management systems such as no-tillage, conventional with disc plow and heavy disc harrow, and fallow modify the porosity and the shape of pores of a Distroferric Red Nitosol, influencing water infiltration, which was favored in no-tillage for the greater presence of elongated pores.

Soil and crop residue CO2-C emission under tillage systems in sugarcane-producing areas of southern Brazil

Appropriate management of agricultural crop residues could result in increases on soil organic carbon (SOC) and help to mitigate gas effect. To distinguish the contributions of SOC and sugarcane (Saccharum spp.) residues to the short-term CO2-C loss, we studied the infl uence of several tillage systems: heavy offset disk harrow (HO), chisel plow (CP), rotary tiller (RT), and sugarcane mill tiller (SM) in 2008, and CP, RT, SM, moldboard (MP), and subsoiler (SUB) in 2009, with and without sugarcane residues relative to no-till (NT) in the sugarcane producing region of Brazil. Soil CO2-C emissions were measured daily for two weeks after tillage using portable soil respiration systems. Daily CO2-C emissions declined after tillage regardless of tillage system. In 2008, total CO2-C from SOC and/or residue decomposition was greater for RT and lowest for CP. In 2009, emission was greatest for MP and CP with residues, and smallest for NT. SOC and residue contributed 47% and 41%, respectively, to total CO2-C emissions. Regarding the estimated emissions from sugarcane residue and SOC decomposition within the measurement period, CO2-C factor was similar to sugarcane residue and soil organic carbon decomposition, depending on the tillage system applied. Our approach may define new emission factors that are associated to tillage operations on bare or sugarcane-residue-covered soils to estimate the total carbon loss.

Sistemas de preparo do solo e populações de plantas em espaçamento reduzido: comportamento de cultivares de milho (Zea mays L.)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeito de biodeisel de mamona no diesel interior e metropolitano em trator agrícola

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A aventura do risco entre os trabalhadores do corte de cana-de-açúcar

Pós-graduação em Ciências Sociais - FFC

Adubação de pré-semeadura na cultura do milho em diferentes manejo do solo

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Atuação de forças em hastes sulcadoras de semeadoras-adubadoras para plantio direto

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desempenho de semeadoras-adubadoras de milho (Zea mays L.) em sistema de plantio direto

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)