Características ópticas e morfológicas de nanoestruturas de ouro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Factors associated with exclusive breastfeeding in children under four months old in Botucatu-Sp, Brazil

This study aimed to identify factors associated with exclusive breastfeeding (AME) and the reasons mothers presented to introduce complementary feeding in the first four months of life. A total of 380 mothers (92.2%) of children under four months old vaccinated in a Multi-vaccination Campaign were interviewed. To identify factors associated to AME, univariate and multiple logistic regressions analyses were performed. Thirty-eight percent of the children were on AME; 33.4% consumed cow milk; 29.2% tea; and 22.4% water. The mothers justified introduction of cow milk by factors related to quantity/quality of maternal milk and necessity of the child. The use of a pacifier (odds ratio=2.63; CI95%=1.7-4.06) and difficulty to breastfeed (odds ratio=1.57., CI95%=1.02-2.41) were associated with the absence of AME. The populational attributable risk percentage for the use of a pacifier was estimated at 46.8%. Thus, modifiable risk factors were associated with AME interruption.

Effect of post length on the fatigue resistance of bovine teeth restored with bonded fiber posts: A pilot study

This study evaluated the influence of the cementation length of glass fiber-reinforced composite (FRC) on the fatigue resistance of bovine teeth restored with an adhesively cemented FRC. Thirty roots of single-rooted bovine teeth were allocated to 3 groups (n = 10), according to the ratio of crown length/root length (post cementation length): group 1 = 2/3, group 2 = 1/2, and group 3 = 1/1. The roots were prepared, the fiber posts (FRC Postec Plus) were cemented, and the specimens were submitted to 2 million mechanical cycles. After fatigue testing, a score was given based on the number of fatigue cycles until fracture, and data were submitted to statistical analysis. All specimens were resistant to fatigue. Taking into account the methodology and results of this study, the evaluated fiber posts can be cemented based on the ratio of crown/root at 1/1. Further clinical studies must be conducted to verify this ratio.

Gold nanoelectrode ensembles for direct trace electroanalysis of iodide

A procedure for the standardization of ensembles of gold nanodisk electrodes (NEE) of 30 nm diameter is presented, which is based on the analytical comparison between experimental cyclic voltammograms (CV) obtained at the NEEs in diluted solutions of redox probes and CV patterns obtained by digital simulation. Possible origins of defects sometimes found in NEEs are discussed. Selected NEEs are then employed for the study of the electrochemical oxidation of iodide in acidic solutions. CV patterns display typical quasi-reversible behavior which involves associated chemical reactions between adsorbed and solution species. The main CV characteristics at the NEE compare with those observed at millimeter sized gold disk electrodes (Au-macro), apart a slight shift in E1/2 values and slightly higher peak to peak separation at the NEE. The detection limit (DC) at NEEs is 0.3 mu M, which is more than one order of magnitude lower than DL at the Au-macro (4 RM). The mechanism of the electrochemical oxidation of iodide at NEEs is discussed. Finally, NEEs are applied to the direct determination of iodide at micromolar concentration levels in real samples, namely in some ophthalmic drugs and iodized table salt. (c) 2006 Elsevier B.V. All rights reserved.

Accountability in Smart Microgrids Based on Conservative Power Theory

Smart microgrids offer a new challenging domain for power theories and metering techniques because they include a variety of intermittent power sources which positively impact on power flow and distribution losses but may cause voltage asymmetry and frequency variation. In smart microgrids, the voltage distortion and asymmetry in presence of poly-phase nonlinear loads can be also greater than in usual distribution lines fed by the utility, thus affecting measurement accuracy and possibly causing tripping of protections. In such a context, a reconsideration of power theories is required since they form the basis for supply and load characterization. A revision of revenue metering techniques is also suggested to ensure a correct penalization of the loads for their responsibility in generating reactive power, voltage asymmetry, and distortion. This paper shows that the conservative power theory provides a suitable background to cope with smart grids characterization and metering needs. Simulation and experimental results show the properties of the proposed approach.

On the Origin of Cattle: How Aurochs Became Cattle and Colonized the World

Since their domestication in the Neolithic, cattle have belonged to our cultural heritage. The reconstruction of their history is an active field of research 1 that contributes to our understanding of human history. Archeological data are now supplemented by analyses of modern and ancient samples of cattle with DNA markers of maternal, paternal, or autosomal inheritance. The most recent genetic data suggest that maternal lineages of taurine cattle originated in the Fertile Crescent with a possible contribution of South-European wild cattle populations, while zebu cattle originate from the Indus Valley. Subsequently, cattle accompanied human migrations, which led to the dispersal of domestic cattle of taurine, indicine, or mixed origin over Asia, Africa, Europe, and the New World. This has resulted in their adaptation to different environments and considerable variation in appearance and performance. More recently, rational management of breeding led to international movements of sires, which again changed the global patterns of genetic diversity.

Healing outcomes at implants installed in grafted sites: an experimental study in dogs

Aim: To evaluate the integration of implants installed using a surgical guide in augmented sites with autologous bone or deproteinized bovine bone mineral (DBBM) blocks, concomitantly with a collagen membrane.Material and methods: Mandibular molars were extracted bilaterally in six Labrador dogs, the buccal bony wall was removed, and a box-shaped defect was created. After 3 months, flaps were elevated, a bony graft was harvested from the ascending ramus, and secured to the lateral wall of the defect by means of screws. In the left mandibular side, a DBBM block was fixed into the defect. A resorbable membrane was applied at both sides, and the flaps were sutured. After 3 months, flaps were elevated, and a customized device was used as surgical guide to prepare the recipient sites in the interface between grafts and parent bone. One implant was installed in each side of the mandible. After 3 months, biopsies were harvested, and ground sections were prepared for histologic evaluation.Results: One autologous bone block graft was lost before implant installation. The width of the alveolar crest at the test sites (DBBM) was 5.4 +/- 1.2 mm before, 9.4 +/- 1.2 mm immediately after grafting, and 9.3 +/- 1 mm at implant installation. At the control sites (autologous bone), the corresponding values were: 5.2 +/- 1, 9 +/- 1.2, and 8.7 +/- 0.9 mm, respectively. All implants installed were available for histologic evaluation (n = 5). The autologous bone grafts, rich in vessels and cells, were integrated in the parent bone, and only little non-vital bone was found. The BIC% was 56.7 +/- 15.6% and 54.2 +/- 13.2% at the buccal and lingual aspects, respectively. At the test sites, the DBBM appeared to be embedded into connective tissue, and very little newly formed bone was encountered within the grafts. The BIC% was 5.8 +/- 12.3% and 51.3 +/- 14.2% at the buccal and lingual aspects, respectively.Conclusions: Autologous bone blocks used to augment the alveolar bony crest horizontally allowed the complete osseointegration of implants installed after 3 months of healing. However, similar blocks of DBBM did not promote osseointegration, although the installed implants were stable owing to the osseointegration in the sites of the parent bone.

Persistence and metabolism of fenthion in orange fruit

The persistence and metabolism of fenthion in orange fruit were studied in field conditions. The fenthion was transformed to fenthion sulfoxide and fenthion sulfone. Sunlight photodegradation experiments showed that this transformation is due to the action of sunlight. Residues were found only in the fruit peel. Fenthion showed a rapid degradation rate with a half-life of ca. 6 days. Fenthion sulfoxide was degraded more slowly with a half-life of ca. 14 days and represented the major residue. Fenthion sulfone was present in low quantities.

Persistence and Metabolism of Folpet in Grapes and Wine

The fate of folpet from the treatment on vine to the production of wine was studied. Sunlight degraded folpet to unknown products. Phthalimide was a minor metabolite formed on grapes from folpet. Folpet degraded in must, giving 80% phthalimide; the results obtained with model solutions showed that in must folpet can also give small amounts of phthalic acid. During wine-making folpet degraded completely, and at the end of fermentation phthalimide was only present in wine. This compound was stable in wine after several months. The presence of folpet in grapes inhibited the alcoholic fermentation of Saccharomyces cerevisiae and Kloeckera apiculata completely. Phthalimide, on the contrary, had no negative effect on the fermentative action of the two yeasts. GC and HPLC methods were developed to determine folpet and its metabolites.

Fate of Some New Fungicides (Cyprodinil, Fludioxonil, Pyrimethanil, and Tebuconazole) from Vine to Wine

The fate of four new fungicides (cyprodinil, fludioxonil, pyrimethanil, and tebuconazole) from the treatment on vine to the production of wine was studied. The influence of clarifying agents (bentonite, charcoal, potassium caseinate, gelatin, and polyvinylpolypyrrolidone) on residue concentrations in wine was also studied. The fungicide residues on grapes showed different decay rates after treatment, with first-order kinetics and half-lives ranging from 8 to 57 days. Grape processing into wine caused considerable residue reduction with cyprodinil (ca. 80%), fludioxonil (ca. 70%), and tebuconazole (ca. 50%) and no reduction with pyrimethanil. The two wine-making techniques employed (with and without maceration) had the same influence on the residue concentrations in wine, except for fludioxonil which showed maximum residue reduction with vinification with maceration. Among the clarifying agents tested, only charcoal showed effective action on the elimination of residue content in wine, proving complete elimination, or almost, of fungicide residues.

Gas Chromatographic Determination of Cyprodinil, Fludioxonil, Pyrimethanil, and Tebuconazole in Grapes, Must, and Wine

A rapid and simple gas chromatographic method for determinating cyprodinil, fludioxonil, pyrimethanil, and tebuconazole in grapes, must, and wine is described. An on-line microextraction method was used with a one-step extraction-partition procedure. Nitrogen-phosphorus and mass spectrometric detectors were used, because of their low sensitivity and high selectivity. Because of high selectivity of detector, no cleanup was necessary and the extract was concentrated 5 times. Recoveries from fortified grapes, must, and wine ranged from 93 to 110%. Limits of determination were 0.05 mg/kg for cyprodinil and pyrimethanil and 0.10 mg/kg for fludioxonil and tebuconazole.

Residues of Some Pesticides in Fresh and Dried Apricots

The persistence of three pesticides (fenitrothion, dimethoate, and ziram) in apricots in field conditions and their fate during the drying process were studied. After the treatments, the pesticides showed fast decay rates with pseudo-first-order kinetics and half-lives ranging from 6.9 to 9.9 days. The drying process showed a different effect on residue concentrations in dried apricots: omethoate (metabolite of dimethoate) and ziram residues had almost doubled, while fenitrothion disappeared and dimethoate remained constant.

Effect of silica coating on flexural strength of fiber posts

Purpose: Fiber-reinforced composite (FRC) posts can be air-abraded to obtain good attachment to the resin cement. This study tested the effect of silica coating on the flexural strength of carbon, opaque, and translucent quartz FRC posts. Materials and Methods: Six experimental groups of FRC posts (n = 10 per group) were tested, either as received from the manufacturer or after chairside silica coating (30-μm CoJet-Sand). Results: There was no significant difference in the flexural strength of nonconditioned (504 to 525 MPa) and silica-coated (514 to 565 MPa) specimens (P > .05) (analysis of variance). The type of post did have a significant effect on flexural strength (P < .05). Conclusion: Chairside silica coating did not affect the flexural strength of both carbon and quartz FRC posts.

Fatigue resistance of the bond of a glass-infiltrated alumina ceramic to human dentin

Purpose: To evaluate the fatigue resistance of the bond between dentin and glass-infiltrated alumina ceramic, using different luting protocols. Materials and Methods: The null hypothesis is that the fatigue resistance varies with the luting strategy. Forty blocks of In-Ceram Alumina were prepared, and one surface of each block was abraded with 110-μm aluminum oxide particles. Then, the blocks were luted to flat dentin surfaces of 40 human third molars, using 4 different luting strategies (luting system [LS]/ceramic surface conditioning [CSC]) (n=10): (G1) [LS] RelyX-Unicem/[CSC] airborne abrasion with 110-μm Al2O3 particles; (G2) [LS] One-Step + Duo-Link (bis-GMA-based resin)/[CSC] etching with 4% hydrofluoric acid + silane agent; (G3) [LS] ED-Primer + Panavia F (MDP-based resin)/[CSC] Al2O 3; (G4) [LS] Scotchbond1+RelyX-ARC (bis-GMA-based resin)/[CSC] chairside tribochemical silica coating (air abrasion with 30-μm SiO x particles + silane). After 24 h of water storage at 37°C, the specimens were subjected to 106 fatigue cycles in shear with a sinusoidal load (0 to 21 N, 8 Hz frequency, 37°C water). A fatigue survivor score was given, considering the number of the fatigue cycles until fracture. The failure modes of failed specimens were observed in a SEM. Results: G3 (score = 5.9, 1 failure) and G4 (score = 6, no failures) were statistically similar (p = 0.33) and had significantly higher fatigue resistance than G1 (score = 3.9, 5 failures) and G2 (score = 3.7, 6 failures) (p < 0.03). SEM analysis of fractured specimens of G1 and G2 showed that almost all the failures were between ceramic and cement. Conclusion: The MDP-based resin cement + sandblasting with Al2O3 particles (G3) and bis-GMA-based resin cement + tribochemical silica coating (G4), both using the respective dentin bonding systems, were the best luting protocols for the alumina ceramic. The null hypothesis was confirmed.

The reproductive biology and cycle of Rioraja agassizi (Müller and Henle, 1841) (Chondrichthyes: Rajidae) in southeastern Brazil, SW Atlantic Ocean

Specimens of Rioraja agassizi were collected at Guarujá pier, São Paulo State, Brazil, from March 2005 to March 2006. A total of 275 males were captured. Based on the analysis of the clasper length, gonad weight, clasper gland length, alar thorns and lobule diameter, the size-at-maturity was estimated to be 32 cm. There were 1049 females in the record. Size-at-maturity was calculated in 40 cm. Sexual resting females were observed. Gonadosomatic and hepatosomatic indexes varied significantly in both sexes throughout the year. However, ovulation, egg-laying and presence of sperm in the seminal vesicle were observed all year round. For this reason, an annual cycle with at least one peak in the sexual activity is proposed for this species.