183 resultados para Piecewise Interpolation
Resumo:
O grau de desenvolvimento das capacidades físicas no futebol é fator determinante do nível desportivo do jogador. O objetivo do presente estudo foi comparar valores de limiar anaeróbio e consumo máximo de oxigênio entre jogadores profissionais de futebol de diferentes posições. Para tanto, 25 atletas (idade = 22,08 ± 8,28 anos, peso = 76,12 ± 9,8kg, altura = 179,8 ± 7,1cm e relação corporal = 12,21 ± 3,67% de gordura corporal) foram divididos em cinco grupos, como se segue: goleiros (GO), zagueiros (ZA), laterais (LA), meio-campistas (MC) e atacantes (AT). O VO2max foi determinado em esteira ergométrica através de análise direta e a velocidade de corrida correspondente ao limiar anaeróbio fixo de 4mM (V4mM), em teste de campo (2 x 1.000m a 90 e 95% da velocidade máxima para a distância) através de interpolação linear. A V4mM foi menor (p < 0,05) para o grupo GO em relação aos demais grupos. Além disso, os grupos LA e MC apresentaram valores de V4mM significantemente maiores em relação aos grupos ZA e AT. O grupo GO mostrou VO2max significantemente menor em relação a todos os outros grupos, sendo que estes últimos não apresentaram diferença entre si. Uma vez que os atletas de diferentes posições não realizavam treinamento diferenciado, os autores creditam as diferenças encontradas à especificidade da movimentação durante partidas e coletivos.
Resumo:
Background: It was already evidenced decreased heart rate variability (HRV) in chronic obstructive pulmonary disease (COPD) patients at rest.Objective: In order to insert new elements in the literature regarding this issue, we evaluated geometric index of HRV in COPD subjects.Method: We analyzed data from 34 volunteers, divided into two groups according to spirometric values: COPD (17 volunteers, FEV1/FVC = 47.3 +/- 10.2; FEV1 = 50.8 +/- 15.7) and control (17 volunteers, FEV1/FVC = 78.8 +/- 10.8; FEV1 = 100.1 +/- 14.7). For analysis of HRV indexes the volunteers remained in the supine position for 30 minutes. We analyzed the following indexes: triangular index (RRtri), triangular interpolation of RR intervals (TINN) and Poincare plot (SD1, SD2 and SD1/SD2). Student t test for unpaired samples and Mann-Whitney test were used for data analysis.Results: We observed statistically significant reductions in geometric indexes in the COPD group: RRtri (0.043 +/- 0.01 vs. 0.059 +/- 0.02; p = 0.018), TINN (105.88 +/- 51.82 vs. 151.47 +/- 49.9; p=0.014), SD1 (9.76 +/- 4.66 vs. 14.55 +/- 6.04; p = 0.014) and SD2 (34.86 +/- 17.02 vs. 51.51 +/- 18.38; p = 0.010). SD1/5D2 (0.30 +/- 0.11 vs. 0.28 +/- 0.07; p = 0.605) were not significantly different between groups. Patients with COPD presented a visual analysis of Poincare plot of lower dispersion of RR intervals both beat to beat and the long term.Conclusion: Subjects with COPD present reduction of geometric indexes of HRV, indicating reduced heart rate variability. (C) 2010 Sociedade Portuguesa de Pneumologia. Published by Elsevier Espana, S.L. All rights reserved.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Continuing development of new materials makes systems lighter and stronger permitting more complex systems to provide more functionality and flexibility that demands a more effective evaluation of their structural health. Smart material technology has become an area of increasing interest in this field. The combination of smart materials and artificial neural networks can be used as an excellent tool for pattern recognition, turning their application adequate for monitoring and fault classification of equipment and structures. In order to identify the fault, the neural network must be trained using a set of solutions to its corresponding forward Variational problem. After the training process, the net can successfully solve the inverse variational problem in the context of monitoring and fault detection because of their pattern recognition and interpolation capabilities. The use of structural frequency response function is a fundamental portion of structural dynamic analysis, and it can be extracted from measured electric impedance through the electromechanical interaction of a piezoceramic and a structure. In this paper we use the FRF obtained by a mathematical model (FEM) in order to generate the training data for the neural networks, and the identification of damage can be done by measuring electric impedance, since suitable data normalization correlates FRF and electrical impedance.
Resumo:
Spatial sampling designs used to characterize the spatial variability of soil attributes are crucial for science studies. Sample planning for the interpolation of a regionalized variable may use several criteria, which could be best selected from an estimated semivariogram from a previously established grid. The objective of this study was to optimize the procedure for scaled semivariogram use to plan soil sampling in sugarcane fields in the Alfisol and Oxisol regions of Jaboticabal Town in So Paulo State, Brazil. A scaled semivariogram for several soil chemical attributes was estimated from the data obtained from two grids positioned on a sugarcane field area, sampled at a depth of 0.0-0.5 m. The research showed that regular grids with uniform intervals did not express the real spatial variability of the soil attributes of Oxisols and Alfisols in the study area. The calculated final sampling density based on the scaled parameters of the semivariogram was one sample for each 2 ha in Area 1 (convex landscape) and one sample for each 1 ha in Area 2 (linear landscape), as indicated by SANOS 0.1 software. The combined use of the simulation programs and scaled semivariograms can be used to define sampling points. These results may help in soil fertility mapping and thereby improve nutrient management in sugarcane crops.
Resumo:
Introduction: The objective of this study was to analyze the spatial behavior of the occurrence of trachoma cases detected in the City of Bauru, State of São Paulo, Brazil, in 2006 in order to use the information collected to set priority areas for optimization of health resources. Methods: the trachoma cases identified in 2006 were georeferenced. The data evaluated were: schools where the trachoma cases studied, data from the 2000 Census, census tract, type of housing, water supply conditions, distribution of income and levels of education of household heads. In the Google Earth® software and TerraView® were made descriptive spatial analysis and estimates of the Kernel. Each area was studied by interpolation of the density surfaces exposing events to facilitate to recognize the clusters. Results: of the 66 cases detected, only one (1.5%) was not a resident of the city's outskirts. A positive association was detected of trachoma cases and the percentage of heads of household with income below three minimum wages and schooling under eight years of education. Conclusions: The recognition of the spatial distribution of trachoma cases coincided with the areas of greatest social inequality in Bauru City. The micro-areas identified are those that should be prioritized in the rationalization of health resources. There is the possibility of using the trachoma cases detected as an indicator of performance of micro priority health programs.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
This work concerns the application of the optimal control theory to Dengue epidemics. The dynamics of this insect-borne disease is modelled as a set of non-linear ordinary differential equations including the effect of educational campaigns organized to motivate the population to break the reproduction cycle of the mosquitoes by avoiding the accumulation of still water in open-air recipients. The cost functional is such that it reflects a compromise between actual financial spending (in insecticides and educational campaigns) and the population health (which can be objectively measured in terms of, for instance, treatment costs and loss of productivity). The optimal control problem is solved numerically using a multiple shooting method. However, the optimal control policy is difficult to implement by the health authorities because it is not practical to adjust the investment rate continuously in time. Therefore, a suboptimal control policy is computed assuming, as the admissible set, only those controls which are piecewise constant. The performance achieved by the optimal control and the sub-optimal control policies are compared with the cases of control using only insecticides when Breteau Index is greater or equal to 5 and the case of no-control. The results show that the sub-optimal policy yields a substantial reduction in the cost, in terms of the proposed functional, and is only slightly inferior to the optimal control policy. Copyright (C) 2001 John Wiley & Sons, Ltd.
Resumo:
In this note we investigate the influence of structural nonlinearity of a simple cantilever beam impacting system on its dynamic responses close to grazing incidence by a means of numerical simulation. To obtain a clear picture of this effect we considered two systems exhibiting impacting motion, where the primary stiffness is either linear (piecewise linear system) or nonlinear (piecewise nonlinear system). Two systems were studied by constructing bifurcation diagrams, basins of attractions, Lyapunov exponents and parameter plots. In our analysis we focused on the grazing transitions from no impact to impact motion. We observed that the dynamic responses of these two similar systems are qualitatively different around the grazing transitions. For the piecewise linear system, we identified on the parameter space a considerable region with chaotic behaviour, while for the piecewise nonlinear system we found just periodic attractors. We postulate that the structural nonlinearity of the cantilever impacting beam suppresses chaos near grazing. (C) 2007 Elsevier Ltd. All rights reserved.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
O objetivo deste estudo foi analisar os efeitos do treinamento de natação na intensidade do limiar anaeróbio (LAn), determinado na piscina e no ergômetro de braço, verificando se este pode ser utilizado para avaliar os efeitos do treinamento em nadadores. Participaram do estudo sete nadadores de ambos os sexos, com nível de performance regional, que foram submetidos aos seguintes testes, antes e após oito semanas de treinamento: 1) dois tiros de 400m, um a 85% e outro a 95% do máximo, com coleta de 25mil de sangue do lóbulo da orelha no 1º, 3º e 5º minuto após cada tiro, para posterior análise do lactato sanguíneo (YSI 1500); 2) teste contínuo progressivo realizado no ergômetro de braço (UBE 2462 Cybex), com carga inicial de 33,3W e incrementos de 16,6W a cada três minutos até a exaustão voluntária, com coleta de sangue ao final de cada estágio. Um grupo controle de indivíduos não ativos (n = 9), que se manteve sedentário, realizou somente o procedimento 2 no mesmo intervalo de tempo. O LAn na natação (NLAn) e no ergômetro de braço (BLAn) foi encontrado através de interpolação linear, considerando uma concentração fixa de lactato de 4mM e 3,5mM, respectivamente. Os resultados demonstram diferença significante para o grupo treinado, entre o pré (130,4 ± 20,4W) e o pós-teste (137,7 ± 17,9W) para o BLAn. Porém, não foi encontrada diferença significante para o NLAn (1,09 ± 0,1m.s-1 e 1,13 ± 0,1m.s-1, p = 0,06). No grupo controle não foi encontrada diferença para o BLAn entre o pré (93,2 ± 11,5W) e o pós-teste (87,7 ± 7,2W). Pode-se concluir através desses dados que a determinação do LAn no ergômetro de braço é útil para detectar adaptações na capacidade aeróbia de nadadores com nível de performance regional.