The effect of alloying in Pt-Sn/C electrocatalysts in the performance of a direct ethanol fuel cell

Work on Pt-Sn-C catalysts for ethanol oxidation showed that a thermal treatment at moderate temperatures leads to a significant increase in activity. The best activity was observed for Pt3Sn1 thermally treated at 200 degrees C and ascribed to a Pt3Sn1 phase plus a cleaning effect. However, electronic effects may be very important and these were not evaluated in the Pt3Sn1 phase. Therefore, in this work we investigated the effect of the degree of alloy on the electronic structure of Pt3Sn1 electrocatalysts by performing electrochemical in situ X-ray absorption (XAS) experiments in the Pt L-III XANES region. Overall, the results show that although the occupancy of the Pt 5d band depends on the degree of alloy other factors, such as the presence of tin oxides/hydroxides in the materials, have to be considered to understand the performance of the DEFC.

Brazilian soccer players and no-players adolescents: effect of the maturity status on the physical capacity components performance

The aim of this study was to compare the speed and the agility between Brazilian soccer players and non-players, regarding maturity status in adolescents 11-15 years old. Forty and two soccer players (age – 159.30±17.28 months old; weight – 48.45±9.96 kg; height – 1.53±0.10 m) and 45 non-players (age – 162.62±24.92 months old; weight – 48.30±8.35 kg; height – 1.54±0.12 m) participated of this study. Participants were classified by maturity status. On 2 different days with 1 week of differences between the assessments the participants were evaluated the agility, by Shuttle Run test, and the speed, by 30 m maximum speed test. The results showed that the maturity status was an influential factor in the performance with better results for individuals in a more advanced stage. The soccer practice does not seem to interfere in the performance of the physical capacity components analyzed, only effective when different maturity levels are involved in the analysis. It is also possible that late maturing boys selectively drop-out of soccer as age and sport specialization increase.

Validation of the Deardorff model for estimating energy balance components for a sugarcane crop

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Evaluation of tractive performance of four agricultural tractors in laterally inclined terrain

O presente trabalho teve como objetivo avaliar o desempenho operacional de quatro tratores agrícolas com tração dianteira auxiliar, em função de seis inclinações laterais, em uma pista lateral de ensaios, pertencente à Faculdade de Ciências Agronômicas da Universidade Estadual Paulista, Câmpus de Botucatu. As inclinações laterais foram 0; 5; 10; 15; 20 e 25 graus. em todas estas situações, os tratores operaram com carga predeterminada de tração imposta ao trator tracionado de 40 kN na inclinação de 0 grau. Portanto, foi utilizado um delineamento em blocos casualizados (DBC), sendo seis inclinações e quatro tratores, e com três repetições para cada tratamento. As variáveis analisadas foram patinhagem, força de tração, consumo horário de combustível e velocidade de deslocamento. Concluiu-se que a configuração dos rodados pneumáticos influenciaram no desempenho operacional dos tratores, conforme aumentaram as inclinações laterais do terreno.

Determination of the numerical parameters of a continuous damage model for the structural analysis of clay brick masonry

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

STUDY of THE TURNING NICKEL BASE ALLOY PYROMET (R) 31V (SAE HEV8)

Considering the constant technological developments in the aeronautical, space, automotive, shipbuilding, nuclear and petrochemical fields, among others, the use of materials with high strength mechanical capabilities at high temperatures has been increasingly used. Among the materials that meet the mechanical strength and corrosion properties at temperatures around 815 degrees C one can find the nickel base alloy Pyromet 31V (SAE HEV8). This alloy is commonly applied in the manufacturing of high power diesel engines exhaust valves where it is required high resistance to sulphide, corrosion and good resistance to creep. However, due to its high mechanical strength and low thermal conductivity its machinability is made difficult, creating major challenges in the analysis of the best combinations among machining parameters and cutting tools to be used. Its low thermal conductivity results in a concentration of heat at high temperatures in the interfaces of workpiece-tool and tool-chip, consequently accelerating the tools wearing and increasing production costs. This work aimed to study the machinability, using the carbide coated and uncoated tools, of the hot-rolled Pyromet 31V alloy with hardness between 41.5 and 42.5 HRC. The nickel base alloy used consists essentially of the following components: 56.5% Ni, 22.5% Cr, 2,2% Ti, 0,04% C, 1,2% Al, 0.85% Nb and the rest of iron. Through the turning of this alloy we able to analyze the working mechanisms of wear on tools and evaluate the roughness provided on the cutting parameters used. The tests were performed on a CNC lathe machine using the coated carbide tool TNMG 160408-23 Class 1005 (ISO S15) and uncoated tools TNMG 160408-23 Class H13A (ISO S15). Cutting fluid was used so abundantly and cutting speeds were fixed in 75 and 90 m/min. to feed rates that ranged from 0.12, 0.15, 0.18 and 0.21 mm/rev, and cutting depth of 0.8mm. The results of the comparison between uncoated tools and coated ones presented a machined length of just 30% to the first in relation to the performance of the second. The coated tools has obtained its best result for both 75 and 90 m/min. with feed rate of 0.15 mm/rev, unlike the uncoated tool which obtained its better results to 0.12 mm/rev.

A physiological manoeuvre to improve the positivity of the gastro-oesophageal reflux scintigraphic test

One of the best examinations used routinely to detect gastro-oesophageal reflux (GOR) is scintigraphy and attempts are continuously being made to improve the performance of the test. We have tested a new manoeuvre to improve the results. Three hundred and twenty eight patients (190 males and 138 females, aged 1 month to 84 years, average 4.47 years) were studied after a 12 h fast period with 100 MBq of Tc-99(m)-Phytate, 50 ml volume, directly delivered into the stomach in a mixture of orange juice. All patients were strongly suspected of having GOR. Conventional acquisition was done for 20 min, at a rate of one frame every 20 s. in the middle of the examination, small children were put in the upright position and held there for a few seconds or released in a way that allowed movement; adults were asked to stand up and walk a few metres. The test was then continued for the remaining 10 min. The global index of positivity was 64.6% (76 positive cases in the first half of the examination and 134 positive cases only after the manoeuvre). The mean of GOR episodes observed in the positive cases without the manoeuvre was 0.5 per patient, significantly different from the mean of 1.59 noted after the manoeuvre (P<0.01). In 28 cases the manoeuvre increased either the intensity or the frequency of reflux previously detected without it. We believe that this manoeuvre should be performed in all scintigraphic tests aiming to detect GOR. In the present series, the manoeuvre increased the frequency of GOR episodes. ((C) 2001 Lippincott Williams & Wilkins)].

Effects of betaine on the growth of the fish piauçu, Leporinus macrocephalus

Testamos o efeito da betaína na performance de crescimento do peixe piauçu. Para tal, 21 espécimes (média ± DP: peso corpóreo: 14,9 ± 1,3 g) foram distribuídos aleatoriamente em um entre três tratamentos (n = 7 cada; 1 peixe/aquário): ração sem acréscimo de betaína (controle), 3,6 g betaína/Kg de ração, 7,1 g betaína/Kg de ração. Os peixes foram submetidos às condições experimentais por 60 dias. Os peixes apresentaram crescimento estatisticamente significativo ao longo do experimento, porém nenhuma diferença estatística foi encontrada para qualquer parâmetro analisado, exceto para o fator de condição o qual foi maior no grupo controle do que nos grupos tratados com betaína. de acordo com isso, concluímos que a betaína não melhora o crescimento do piauçu.

Reduction of the nutritional values of diets for hens through supplementation with phytase

Objetivou-se avaliar os efeitos da redução dos níveis nutricionais de dietas para poedeiras marrons em pico de postura sobre o desempenho das aves, a qualidade dos ovos e os parâmetros ósseos. No total foram avaliadas oito dietas, cada uma com cinco repetições de oito aves: 1. controle: formulada para suprir as exigências das aves; 2) controle + 0,03% ou 600 FTU; 3) 15% PB; 2.800 kcal de EM; 3,8% Ca e 0,28% Pd; 4) dieta 3 + 0,03% ou 600 FTU; 5) 14% PB; 2.750 kcal de EM; 3,4% Ca e 0,23% Pd; 6) dieta 5 + 0,03% ou 600 FTU; 7) 13% PB; 2.700 kcal de EM; 3,0% Ca e 0,18% Pd; e 8) dieta 7 + 0,03% ou 600 FTU. A redução dos níveis nutricionais prejudicou o desempenho das aves, principalmente a produção e massa de ovos, que melhorou com a inclusão de fitase nas dietas. Os parâmetros de qualidade dos ovos, no entanto, não se alteraram com a redução até o nível de 15% de PB; 2.800 kcal de EM/kg; 3,80% Ca e 0,280% Pd, o que não se repetiu nos níveis com menor densidade nutricional. Não houve efeito da redução dos níveis nutricionais sobre os parâmetros ósseos avaliados, exceto a resistência, que melhorou com a suplementação de fitase no nível de 600 FTU. A redução nos níveis nutricionais da dieta para 15% de PB, 2.800 kcal/kg de EM, 3,8% de Ca e 0,280% de Pd com a adição de 600 FTU não prejudica a produção nem a massa de ovos e melhora a saúde óssea das aves.

Clinical performance of a self-etching adhesive at 18 months

Purpose: To test the null hypothesis that beveling and/or etching enamel would not affect the 18-month clinical performance of the self-etching adhesive Clearfil SE Bond (CSEB) in noncarious cervical lesions (NCCL). Methods: With Institutional Review Board approval, 34 patients were enrolled in this study. A total of 120 NCCL was selected and assigned to four groups: (1) CSEB was applied without any cavity preparation; (2) CSEB was applied after beveling enamel; (3) CSEB was applied after etching enamel for 15 seconds with 35% phosphoric acid; (4) CSEB was applied after beveling and etching enamel. A microfilled composite resin was used for all restorations. Resuts: At 6 months after initial placement, 120 restorations (a 100% recall rate) were evaluated. At 18 months, 87 restorations (a 72.5% recall rate) were available for evaluation. A survival rate of 100% was measured for all groups at both 6 and 18 months. Sensitivity to air decreased significantly only for Group 3 (no bevel+acid etch) from baseline to 18 months without statistical changes from 6 months to 18 months. None of the other parameters resulted in significant differences for any of the four groups. However, when data were pooled, both the overall marginal discoloration and the overall marginal adaptation were significantly worse at 18 months than at baseline, while sensitivity to air decreased significantly from baseline to 18 months. The 18-month survival rate of the self-etching adhesive Clearfil SE Bond was not improved by enamel bevel or by enamel etching. Both overall marginal adaptation and overall marginal discoloration were worse at 18 months than at baseline.

Coating residual stress effects on fatigue performance of 7050-T7451 aluminum alloy

The tendency of the aircraft industry is to enhance customer value by improving performance and reducing environmental impact. In view of availability, aluminum alloys have a historically tendency to faster insertion due to their lower manufacturing and operated production infrastructure. In landing gear components, wear and corrosion control of many components is accomplished by surface treatments of chrome electroplating on steel or anodizing of aluminum. One of the most interesting environmentally safer and cleaner alternatives for the replacement of hard chrome plating or anodizing is tungsten carbide thermal spray coating, applied by the high velocity oxy fuel (HVOF) process. However, it was observed that residual stresses originating from these coatings reduce the fatigue strength of a component.An effective process as shot peening treatment, considered to improve the fatigue strength, pushes the crack sources beneath the surface in most of medium and high cycle cases, due to the compressive residual stress field induced. The objective of this research is to evaluate a tungsten carbide cobalt (WC-Co) coating applied by the high velocity oxy fuel (HVOF) process, used to replace anodizing. Anodic films were grown on 7050-T7451 aluminum alloy by sulfuric acid anodizing, chromic acid anodizing and hard anodizing. The influence on axial fatigue strength of anodic films grown on the aluminum alloy surface is to degrade the stress-life performance of the base material. Three groups of specimens were prepared and tested in axial fatigue to obtain S-N curves: base material, base material coated by HVOF and base material shot peened and coated.Experimental results revealed increase in the fatigue strength of Al 7050-T7451 alloy associated with the WC 17% Co coating. on the other hand, a reduction in fatigue life occurred in the shot peened and coated condition. Scanning electron microscopy technique and optical microscopy were used to observe crack origin sites, thickness and coating/substrate adhesion. (c) 2007 Elsevier B.V. All rights reserved.

Effect of the fluorination of DLC film on the corrosion protection of aluminum alloy (AA 5052)

It is presented a study conducted on the physical and electrochemical properties of fluorinated a-C:H films deposited onto a commercial aluminum alloy (AA 5052). The coatings were deposited from mixtures of 91% of acetylene and 9% of argon by plasma immersion ion implantation and deposition technique, PIIID. Total gas pressure was 44 Pa and deposition time (t(dep)) was varied from 300 to 1200 s. The depositing plasmas were generated by the application of radiofrequency power (13.56 MHz, 100W) to the upper electrode and high voltage negative pulses (2400 V. 300 Hz) to the sample holder. Fluorine was incorporated in a post-deposition plasma treatment (13.56 MHz, 70W, 13 Pa) generated from sulfur hexafluoride atmosphere. Chemical structure and composition of the films were investigated using infrared reflectance/absorbance spectroscopy and X-ray photoelectron spectroscopy. The corrosion resistance of the layers was determined by electrochemical impedance spectroscopy (EIS) in a 3.5% NaCl solution, at room temperature. Films presented good adhesion to the substrates and are classified as hydrogenated amorphous carbon (a-C:H) with oxygen traces. Fluorine was detected in all the samples after the post-deposition treatment being its proportion independent on the deposition time. Film thickness presented different tendencies with t(dep), revealing the variation of the deposition rate as a function of the deposition time. Such fluorinated a-C:H films improved the corrosion resistance of the aluminum surface. In a general way the corrosion resistance was higher for films prepared with lower deposition times. The variation of sample temperature with t(dep) was found to be decisive for the concentration of defects in the films and, consequently, for the performance of the samples in electrochemical tests. Results are interpreted in terms of the energy delivered to the growing layer by ionic bombardment. (C) 2010 Elsevier B.V. All rights reserved.

Electromyographic study of the trapezius (pars media) and rhomboideus major muscles in movements of the arm (part 2)

The participation of the trapezius (pars media) and rhomboideus major muscles were studied electromyographically in movements of lateral and medial rotation (free and against resistance) of the arm. In the majority of cases both muscles were inactive during the performance of the analysed movements. Cases in which only one or both muscles acted in free rotation occurred only at the second half or ending of the movement. Records of electrical potentials during against resistance rotation were due to tensional efforts at the shoulder level.

Sensor for hydrogen peroxide based on Prussian Blue modified electrode: Improvement of the operational stability

Improvement of the operational stability of amperometric sensors based on Prussian Blue (PB) modified glassy carbon electrodes is presented. The long term performance of the sensors was evaluated by injection of hydrogen peroxide (5 μM in potassium buffer) solutions in a flow-injection system during a period of 5-10 h. The following parameters were investigated and correlated with the performance of the sensor: the times for electrodeposition and electrochemical activation, temperature, storage time, pH, composition of the buffer solution and of volume sample injected. These analytical characteristics of the modified electrode can be emphasized: initial sensitivity of 0.3 A cm-2 M-1, detection limit of ca. 0.5 μM, precise results (r.s.d.< 1.5%) and possibility to carry out around 50 samples (50 μL) per hour.

Variational studies and replica symmetry breaking in the generalization problem of the binary perceptron

We analyze the average performance of a general class of learning algorithms for the nondeterministic polynomial time complete problem of rule extraction by a binary perceptron. The examples are generated by a rule implemented by a teacher network of similar architecture. A variational approach is used in trying to identify the potential energy that leads to the largest generalization in the thermodynamic limit. We restrict our search to algorithms that always satisfy the binary constraints. A replica symmetric ansatz leads to a learning algorithm which presents a phase transition in violation of an information theoretical bound. Stability analysis shows that this is due to a failure of the replica symmetric ansatz and the first step of replica symmetry breaking (RSB) is studied. The variational method does not determine a unique potential but it allows construction of a class with a unique minimum within each first order valley. Members of this class improve on the performance of Gibbs algorithm but fail to reach the Bayesian limit in the low generalization phase. They even fail to reach the performance of the best binary, an optimal clipping of the barycenter of version space. We find a trade-off between a good low performance and early onset of perfect generalization. Although the RSB may be locally stable we discuss the possibility that it fails to be the correct saddle point globally. ©2000 The American Physical Society.