Development of a micro heat exchanger made with ceramic multi-layers (LTCC) and its setup to gas flow measurements

A green ceramic tape micro heat exchanger was developed using LTCC technology. The device was designed by using a CAD software and 2D and 3D simulations using a CFD package (COMSOL Multiphysics) to evaluate the fluid behavior in the microchannels. The micro heat exchanger is composed of five thermal exchange plates in cross flow arrangement and two connecting plates; heat exchanger dimensions are 26 × 26 × 6 mm3. Preliminary tests were carried out to characterize the device both in atmospheric pressure and in vacuum. The same techniques used in vacuum technology were applied to check the rotameters and to prevent device leakages. Thermal performance of the micro heat exchanger was experimentally tested. © 2009 Elsevier B.V. All rights reserved.

Two-wavelength whole-field interferometry setup for thermal lens study

In this paper we present a new approach for thermal lens analysis using a two-wavelength DSPI (Digital Speckle Pattern Interferometry) setup for wavefront sensing. The employed geometry enables the sensor to detect wavefronts with small phase differences and inherent aberrations found in induced lenses. The wavefronts was reconstructed by four-stepping fringe evaluation and branch-cut unwrapping from fringes formed onto a diffusive glass. Real-time single-exposure contour interferograms could be obtained in order to get discernible and low-spacial frequency contour fringes and obtain low-noise measurements. In our experiments we studied the thermal lens effect in a 4% Er-doped CaO-Al2O3 glass sample. The diode lasers were tuned to have a contour interval of around 120 μm. The incident pump power was longitudinally and collinearly oriented with the probe beams. Each interferogram described a spherical-like wavefront. Using the ABCD matrix formalism we obtained the induced lens dioptric power from the thermal effect for different values of absorbed pump power. © 2012 Copyright SPIE.

Temperature and scarification on seeds germination of copernicia prunifera (Mill) H.E. Moore (Arecaceae)

Copernicia prunifera, known as carnauba, is native to Brazil and presents great potential to be used in gardens and cultivation in pot. Palms species, with relatively few exceptions, can only be propagated by seeds; even so, there are no reports in the literature about the germination of this palm seeds. Several species of the Arecaceae family present seed physical dormancy in varying degrees, demanding treatments to improve germination. The objective of this work was to study the effects of temperature and mechanical scarification on seed germination of C. prunifera. The experimental design was entirely randomized in a factorial arrangement 6 x 2 (six conditions of temperature with or without mechanical scarification) with 4 replications and 25 seeds each. In accordance with the treatment, lateral scarifications were made on the seeds until appearance of the endosperm. Seeds were sown in moist fine vermiculite. Germination (%) and germination rate (GR) were evaluated. Germination data were arcsine (x/100)1/2 transformed before analysis of variance and germination rate data were not transformed. The means of the resulting values were then compared by the Scott-Knott test at 1% confidence level. It was concluded that the biggest germination percentage were obtained at alternated temperature of 25-35°C (92%) and at constant temperature of 25°C (87%). Seeds germinated faster at alternated temperature of 25- 35°C. Germination percentage was similar for the scarified and non-scarified seeds; however, scarified seeds germinated faster.

Analysis of efficiency and rationality in a sugar-alcohol mill using hyperboloid a-load and potency

Brazil is the world's largest producer of sugar cane and which in the state of São Paulo concentrate the greatest amount of sugar cane field of the country. The sugar-alcohol sector has the capacity to produce sufficient thermal and electrical energy to be used in their process of production and commercialize of surplus in electricity distribution network. Therefore it is necessary to evaluate the energy efficiency and rationality within the mill. Accordingly this research proposed analyze the sugar-alcohol mill's sectors globally and individually, located in the west center of the São Paulo state, using the valuation methodology employed by the Agência Nacional de Energia Elétrica (ANEEL) in the industries that do not have systems of cogeneration. In this analysis, the hyperboloids of load and potency were applied based on the indexes of potency factor and load factor that allow estimate the efficiency and rationality. © 2013 IEEE.

Efeitos alelopáticos de microcistinas em rúcula (Eruca sativa Mill.)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Escurecimento enzimático em frutos: polifenoloxidase de atemóia (Annona cherimola Mill. X Annona squamosa L.)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise de crescimento e trocas gasosas de erva-cidreira (Lippia alba (Mill.) N.E.Br. ex Britt & Wilson) cultivada em solução nutritiva

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Sequenciamento de lotes em prensas de alta capacidade com tempo de setup dependente da sequência

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise da diversidade genética de Begomovírus em tomateiro (Lycopersicon esculentum Mill) no Centro-Oeste Paulista

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cultivo e composição química de Ora-pro-nóbis (Pereskia aculeata Mill.) sob déficit hídrico intermitente no solo

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Substrato e irrigação em ora-pro-nóbis (Pereskia aculeata Mill.)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Enxertia e irrigação com água carbonatada no transporte de 'INTPOT.15 N' e na produção do tomateiro ( Lycopersicon esculentum Mill.)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Épocas de plantio, idades e horários de colheita na produção e qualidade do óleo essencial de Lippia alba (Mill.) N.E. Br., quimiotipo limoneno-carvona

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Produção de folhas, óleo essencial e anatomia foliar quantitativa de Lippia alba (Mill.) N.E.Br. (Verbenaceae) em diferentes níveis de sombreamento e épocas de colheita

Pós-graduação em Agronomia (Horticultura) - FCA

Estratégias de controle de insetos-pragas nas culturas do tomateiro (Lycopersicum esculentum Mill) e pimentão (Capsicum annum L.)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)