Influence from the free volume on the photoinduced birefringence in azocompound-containing polymers

The photoinduced birefringence is analyzed in a guest-host azobenzene-containing polymer in the temperature range from 20 to 330 K. An anomalous behavior arises in the low-temperature range, suggesting strong influence from the free volume for the chromophores in the polymer. This influence is so strong that quenched samples have a photoinduced signal ca. 5 times greater than the annealed ones at room temperature. An extended free volume model is presented based on two assumptions about thermal fluctuations in the cavities and their size distribution. This model, which is an extension of the model by Mita et al., can explain the main features of the photoinduced birefringence as a function of time, temperature, and initial free volume state. To account for the influence of free volume on the photoorientation, the detailed reorientation model by Sekkat's was used. We show that Sekkat's model leads to an exponential behavior at small orientation regimes, which simplifies the mathematical treatment and allows the mean free volume to be obtained from the data fitting.

Accuracy assessment of a photogrammetric close-range reconstruction system

Geometric accuracy of a close-range photogrammetric system is assessed in this paper considering surface reconstruction with structured light as its main purpose. The system is based on an off-the-shelf digital camera and a pattern projector. The mathematical model for reconstruction is based on the parametric equation of the projected straight line combined with collinearity equations. A sequential approach for system calibration was developed and is presented. Results obtained from real data are also presented and discussed. Experiments with real data using a prototype have indicated 0.5mm of accuracy in height determination and 0.2mm in the XY plane considering an application where the object was 1630mm distant from the camera.

Os complexos granitoides Cunhaporanga e Tres Corregos (PR) zoneamento magmatico e implicacoes geotectonicas

Geological, petrographic, chemical and zircon typology data from the Cunhaporanga and Tres Corregos granitoid complexes are presented and discussed. Both complexes of Late Precambrian age evolved by crystal fractionation. By its zircon typology the Cunhaporanga is classified as a low temperature calc-alkaline batholith and the Tres Corregos as a medium temperature calc-alkaline complex. This classification implies a major participation of mantle material during the generation of the Tres Corregos magma in relation to the Cunhaporanga ones. In this way both complexes define a magmatic zoning from NW to SE done by a increasing in the depth of magma generation. -from English summary

A new cytotoxic naphthopyrone dimer from Paepalanthus bromelioides

A new naphthopyrone dimer was isolated from the capitula of Paepalanthus bromelioides by chromatographic procedures. Its structure was deduced from spectrometric data. On colorimetric assay for cytotoxicity the new dimer showed IC50 of 55.9 μM. (C) 2000 Elsevier Science B.V.

Técnicas de correlação no delineamento de feições rodoviárias em imagens de baixa e média resolução

This paper presents a method for the sequential road feature delineation from digital images. It is based on a feedback loop between extrapolation and refinement steps of a given road centerline point, using in both steps correlation techniques. Firstly, a previously extracted road centerline point is linearly extrapolated, resulting in an approximate position. Secondly, this approximate position is corrected by comparing gray level profiles extracted perpendicularly to the extrapolation direction. This strategy is then repeated to allow the entire road centerline to be extracted or a stop point to be found. In order to initialize the extraction process, the operator needs to supply a starting point plus direction and width. Experimental results obtained from the application of the method to real image data are presented and discussed in this paper.

Submerged macrophytes height estimation by echosounder data sample

Traditional methods of submerged aquatic vegetation (SAV) survey last long and then, they are high cost. Optical remote sensing is an alternative, but it has some limitations in the aquatic environment. The use of echosounder techniques is efficient to detect submerged targets. Therefore, the aim of this study is to evaluate different kinds of interpolation approach applied on SAV sample data collected by echosounder. This study case was performed in a region of Uberaba River - Brazil. The interpolation methods evaluated in this work follow: Nearest Neighbor, Weighted Average, Triangular Irregular Network (TIN) and ordinary kriging. Better results were carried out with kriging interpolation. Thus, it is recommend the use of geostatistics for spatial inference of SAV from sample data surveyed with echosounder techniques. © 2012 IEEE.

Qualidade de dados fluviométricos obtidos através de perfilamento acústico

Acoustic Doppler current profilers are currently the main option for flow measurement and hydrodynamic monitoring of streams, replacing traditional methods. The spread of such equipment is mainly due to their operational advantages ranging from speed measurement to the greatest detail and amount of information generated about the hydrodynamics of hydrometric sections. As in the use of traditional methods and equipments, the use of acoustic Doppler profilers should be guided by the pursuit of data quality, since these are the basis for project and management of water resources constructions and systems. In this sense, the paper presents an analysis of measurement uncertainties of a hydrometric campaign held in Sapucaí River (Piranguinho-MG), using two different Doppler profilers - a Rio Grande ADCP 1200 kHz and a Qmetrix Qliner. 10 measurements were performed with each equipment consecutively, following the literature quality protocols, and later, a Type A uncertainty analysis (statistical analysis of several independent observations of the input under the same conditions). The measurements of the ADCP and Qliner presented, respectively, standard uncertainties of 0.679% and 0.508% compared with the averages. These results are satisfactory and acceptable when compared to references in the literature, indicating that the use of Doppler profilers is valid for expansion and upgrade of streamflow measurement networks and generation of hydrological data.

Free tools and strategies for the generation of 3D finite element meshes: Modeling of the cardiac structures

The Finite Element Method is a well-known technique, being extensively applied in different areas. Studies using the Finite Element Method (FEM) are targeted to improve cardiac ablation procedures. For such simulations, the finite element meshes should consider the size and histological features of the target structures. However, it is possible to verify that some methods or tools used to generate meshes of human body structures are still limited, due to nondetailed models, nontrivial preprocessing, or mainly limitation in the use condition. In this paper, alternatives are demonstrated to solid modeling and automatic generation of highly refined tetrahedral meshes, with quality compatible with other studies focused on mesh generation. The innovations presented here are strategies to integrate Open Source Software (OSS). The chosen techniques and strategies are presented and discussed, considering cardiac structures as a first application context. © 2013 E. Pavarino et al.

Photogrammetric refinement of laser-based building roof contours

In this paper a photogrammetric method is proposed for refining 3D building roof contours extracted from airborne laser scanning data. It is assumed that laser-derived planar faces of roofs are potentially accurate, while laser-derived building roof contours are not well defined. First, polygons representing building roof contours are extracted from a high-resolution aerial image. In the sequence, straight-line segments delimitating each building roof polygon are projected onto the corresponding laser-derived roof planes by using a new line-based photogrammetric model. Finally, refined 3D building roof contours are reconstructed by connecting every pair of photogrammetrically- projected adjacent straight lines. The obtained results showed that the proposed approach worked properly, meaning that the integration of image data and laser scanning data allows better results to be obtained, when compared to the results generated by using only laser scanning data. © 2013 IEEE.

Extração semi-automática de rodovias em imagens digitais usando técnicas de correlação e o princípio de teste ativo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Desenvolvimento de um sistema de aquisição de dados georreferenciados e de telemetria para monitoramento de parâmetros físicos em sistemas de irrigação

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Produtividade de forragem do milho em função de atributos físicos de um latossolo vermelho distrófico sob plantio direto

Pós-graduação em Agronomia - FEIS

Desempenho de um sistema híbrido eólico-fotovoltaico de pequeno porte para energização rural

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Associação e seleção genômica para características relacionadas à eficiência reprodutiva de fêmeas da raça Nelore

Pós-graduação em Zootecnia - FCAV

Reconstrução de contornos e cumeeiras de telhados de edifícios a partir de imagens aéreas de alta-resolução e poliedros representativos de edifícios extraídos de dados LASER

Pós-graduação em Ciências Cartográficas - FCT