Gerenciamento na construção civil - planejamento e controle: estudo de caso no planejamento físico de um empreendimento imobiliário

Given the high competitiveness in the construction industry, businesses became necessary in a management which reduce costs and delivery times, and is fundamental to running a compatible planning with the magnitude of each work order is the same make feasible the executor. When it comes to planning, one is including both the physical planning of the work, time and duration of the events, as well as the preparation of the cost thereof. There are numerous ways to run the management of works, then it is necessary, in most cases, the planning experience, in previous works, the engineer in charge, because with it he should know what strategy to take the work skirt as planned and designed. For a complete and efficient management, an initial study hard to prepare the physical and financial planning it is necessary, in order to make it real and consistent throughout the execution of the work. It is necessary also a hard monitoring of both the physical and the financial schedule in order to what was initially planned to be completed as close as possible. This paper shows a case study which uses some ways to the management be held with the course of planning, medium and short term, as well as the preparation of the initial budget of the work. Will also be presented as is performed physical planning of a real estate work

Terceirização e trabalhadores da construção civil na cidade de Araraquara/SP

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Importância da avaliação do ciclo de vida na análise de produtos: possíveis aplicações na construção civil

Much has been discussed lately about reusing waste in new construction materials and countless studies have been carried out based on this objective. However, before these products can be called “sustainable” and a recycling system can be effectively implemented, it is fundamental for all the aspects involved in this action to be understood, and more important, what are the true gains for the productive sector and what are the benefits for the environment if this was to occur. In order to obtain a general framework for all environmental aspects and potential impacts associated with these products, over their entire life cycle, the most appropriate methodology is the Life Cycle Assessment (LCA). In view of the above, the objective of this work is to provide an overview of current studies of LCA, its history, its importance, its standards and the methodology employed and its applications related to civil construction. It is expected, to obtain a more complete scenario of the influences from a study of LCA, as well as establishing a contribution for the assessment of specific products and processes for civil construction, disseminating the importance of the use of this tool within the sector.

A gestão de resíduos da construção civil: iniciativas na bacia hidrográfica Tietê-Jacaré e uma proposta para o município de Bauru (SP)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Degradação urbana decorrente da atividade de mineração para a construção civil em Teresina - PI

Pós-graduação em Geografia - IGCE

Benefícios na execução de uma obra sustentável em contrapartida aos métodos tradicionais da construção civil

The civil construction sector in Brazil is, simultaneously, a necessity that drives the economy and an evil that degrades the environment. Simple choices adopted in an enterprise can make big difference in harm caused by constructive practices, minimizing its harmful to the environment and making it sustainable. These choices, however, involve the use of materials and techniques often unknown by the builders, since the construction industry is very traditional. Even worse, the eco-friendly materials and sustainable techniques also face another obstacle to its use: the prejudice. Builders and customers prefer traditional methods to sustain belief that they present lower quality and higher price. This work raises awareness of the urgency with traditional methods must be overridden, showing practical and simple ways for this replacement, as well as confirm the quality equal to or even higher in the use of alternative materials and techniques, without addition in cost. Thus, the benefits are generated for all parties involved, from builders to residents

Análise de misturas solo-agregado reciclados de resíduos sólidos da construção civil, para fins de pavimentação de vias urbanas de baixo volume de tráfego

This work deals with the continuation of Scientific Initiation research initiated by Tamura (2012), which draws up a mixture of soil and recycled aggregate analysis for paving of low traffic volume roads using local materials from the Vale do Paraíba region. The main steps of the process were the soil and recycled aggregate characterization, along with grading tests and California Bearing Ratio (CBR) applied to the soil, the recycled aggregate and the mixture of soil and recycled aggregate; aiming their use as base and sub-base in paving urban roads. The results are discussed, emphasizing the mechanical behavior. The current results are compared with the results of IC Tamura research, taking decisions over this job to the final product best result. For a greater understanding of the work in general were described paving, its structure, its components and its physical behavior. It has been intended to emphasize the importance of the mixture of soil and recycled aggregate to meet the quality requirements and compliance with the specifications of current technical standards, in the context of durability, natural materials economy, decreases volume in landfills and cost reduction

Estudo do grau de modernização e mecanização nas obras de construção civil: estudo de caso - cidade de Lorena

This paper had as emphasis the study of the mechanization and modernization of the construction job sites of the city of Lorena located in the Vale do Paraíba, São Paulo. From the literature review on this topic, it was possible to understand the main causes of the delay in the job sites relating to the new technology available. The research on the history of construction and equipment evolution, along with interviews with workers, engineers and architects, it was possible to analyze the current situation. One of the main intentions of this study was to propose guidelines for the modernization of the construction sites

Gerenciamento de resíduos da construção civil: análise e atualização dos estudos realizados na UNESP-FEG para o município de Guaratinguetá

The construction industry is a large consumer of natural resources and one of the largest generators of residues with significant impacts on the environment. Because of the large production of Construction Industry Residues (RCC), it is essential reliable and updated information about generation, composition and classification sources of these residues, especially for management, recycling and final disposal. RCC represent the most part of solid residues generated in a city. In this way, the management of these residues is an issue that is gaining increasing importance in the Brazilian scenario, since the legal and society requirements to internalize the sustainability in the construction process - since the extraction, use, wastage savings, reutilization until the appropriate discard has been increasing in the last years. The present work objective is updating the quantities produced and collected in Guaratinguetá-SP, based on data collected with the municipal administrative entities that act direct or indirectly in the RCC management, elaborate a detailed bibliographic review, with special attention to the graduate works that were realized in FEG about this theme. With this material, scenarios to a better adequacy of the administrative structure to managements RCC activities, as well as was suggested actions to achieve these scenarios

Aproveitamento de madeiras tropicais para confecção e avaliação de painéis aglomerados com mistura de partículas e resinas alternativas

Pós-graduação em Engenharia Civil - FEIS

Proposição de um checklist de acompanhamento de processos construtivos habitacionais em wood-frame

The need for housing in Brazil is very large, and despite government efforts to address this issue, the housing deficit is too large. When analyzing markets without this problem, it is concluded that one of the factors that influence this model is the construction adopted by Brazilian society that is in masonry. Alternatively, the system can be used in constructive Wood-frame. To apply this system in Brazil, one can say that the workmanship and the materials available to meet the demand would be created in a short period of adjustments and capabilities, but identifies himself as one of the biggest problems the planning and management of works. And one of the tools for solving this problem is to use a checklist of the activities of constructive process, avoiding forgetting or not aware of the activities necessary to complete the project

Processo de modificação térmica, por irradiação de calor, para a melhora da estabilidade dimensional e da durabilidade biológica de madeira sólida

Processo de modificação térmica, por irradiação de calor, para a melhora da estabilidade dimensional e da durabilidade biológica de madeira sólida cuja potencial aplicação industrial ocorre na indústria de transformação e processamento de produtos de madeira. Dentre elas, destacam-se: as indústrias moveleira, a de produtos usados em acabamentos na construção civil e a de instrumentos musicais devido à melhora na estabilidade dimensional da madeira quando termorretificada, e a indústria de utensílios domésticos devido à inibição ao ataque de fungos em madeiras termorretificadas. O processo compreende uma série de etapas, sendo que na primeira etapa todas as peças de madeira a serem tratadas devem ser empilhadas de modo gradeado, sendo que entre as camadas compostas por tábuas devem ser colocados separadores...

Aproveitamento de resíduos de laminação da madeira para a produção de painel estrutural

Products derived from wood or engineered products are becoming interesting alternatives to the replacement of solid wood in various applications, from structural components to the furniture industry and packaging. Among these products, there are panels built by strands, particles and fibers, each one having their particular characteristics and potential of use. Since the different types of panels are produced, waste generation is part of the process, and that more technological it is, it still generates losses of raw materials. Based on the need for rational use of raw materials and using almost full of industrially processed wood, It arises the proposal of this work, which seeks to use waste from the lamination, like pieces of strands, broken strands, strands rough, cracked strands to produce panels with structural characteristics of the OSL panel (Oriented Strand Lumber), LSL (Laminated Strand Lumber) and OSB (Oriented Strand Lumber). Besides the use of waste, this paper seeks an alternative to the use of the adhesive, because the industry uses formaldehyde-based adhesives, which over the press, they emit large amounts of formaldehyde, which is very aggressive to humans and environment. The panels made with polyurethane resin based on castor oil and hot-pressed were characterized by physical and mechanical tests according to specifications of European Standard (EN). High values of tensile strength, elastic modulus and density were found in the results of tests. Adding to stable values of swelling and moisture content, the panel studied adds attractive features to the panel market, especially in the civil construction

Análise granulométrica do compósito cimentício produzido com adição de resíduos de madeira e escória

Since the early twenty-first century, the construction sector has been the second largest on the rise in the Brazilian industrial sector, with a growth of 1.4% in 2012, and is likely to remain at this level for a long time. However, unlike decades ago, the industry has been seeking in its manufacturing process, sustainable materials, encompassing in their works the concept of sustainability. Thus, the timber sector seeks to satisfy a market increasingly demanding, innovating techniques and utilization being less aggressive to the environment. The purpose of this study was to produce and evaluate the mechanical strength of the composite cement with the addition of wood residues and slag low oven. Therefore, it was made 42 specimen cement-slag-wood, carried out in two steps. Since at the first, it was varied only the slag particle size, and at the second, through the best result of the previous step, it was varied the wood particles granulometry. The mechanical performance of the composite was evaluated by the results obtained in the compression test and the physical test for determining the density of the material. In the first step of the process can be concluded that the best result was achieved with the use of slag particles retained on the 60 mesh sieve. In the second phase of the study concluded that the best results were achieved with wood particles with the large particles, i.e. particles retained on the 10 mesh sieve. Both in the first and in the second step it can be seen that there has been the influence of the particle size of the waste materials. With the obtained results, could be evaluated that the use of waste for the production of cement-slag-wood composite showed lower performance when compared to the results obtained in studies without the use of waste. However, some applications are feasible to be performed with the use of composite wood-cement-slag

Proposta de conector para ensaios de ligações CDE submetidas à tração perpendicular as fibras em madeira de pinus

The growth of urban population associated with the shortage of supply of public infrastructure such as hospitals, kindergartens, schools, among others, has reinforced the need to develop alternative methods that simplify the construction processes and allows for a reduction in these costs works. The conventional processes have increasingly been shown ineffective to solve the problem of demand for different types of urban and rural buildings. Given this fact, industrial construction processes can gain space and have proven to be highly interesting to solve the above problems, in particular, considering the cost-effective and time. Therefore, this study aimed to determine the influence of moisture on the strength of metal plate connections connectors (printed plate with teeth). For the sizing of the links between structural lumber using metal connectors with teeth prints; controlled process variables (drying of the wood and the different moisture contents), and finally found results and compare them with different literatures order to obtain a qualitative efficiency of the process. Some specimens had very low expectations, can be explained by the presence of bone marrow, and pre-existing cracks. Thus, the results were discarded for further analysis and more accurate results