Influence of design parameters on linear induction motor end effect

In this paper, a factor referred to as k(f) for linear induction motor end effect analysis is presented. The mathematical model takes into account the longitudinal entry end effect. The entry end effect produces considerable distortion in magnetic field distribution. It is shown how this influence is derived from the machine-developed force that is calculated through the application of the I-D theory. The k(f) factor establishes the relationship between the longitudinal end effect and machine parameters, mainly the number of magnetic poles, secondary resistivity, and frequency.

Influences of thermal and electric load fluctuations in the cogeneration attractiveness

The use of mean values of thermal and electric demand can be justifiable for synthesising the configuration and for estimating the economic results because it simplifies the analysis in a preliminary feasibility study of a cogeneration plant. For determining the cogeneration scheme that best fits the energetic needs of a process several cycles and combinations must be considered, and those technically feasible will be analysed according to economic models. Although interesting for a first approach, this procedure do not consider that the peaks and valleys present in the load patterns will impose additional constraints relatively to the equipment capacities. In this paper, the effects of thermal and electric load fluctuation to the cogeneration plant design were considered. An approach for modelling these load variability is proposed for comparing two competing thermal and electric parity competing schemes. A gas turbine associated to a heat recovery steam generator was then proposed and analysed for thermal- and electric-following operational strategies. Thermal-following option revealed to be more attractive for the technical and economic limits defined for this analysis. (c) 2006 Elsevier Ltd. All rights reserved.

A DOE based approach for the design of RBF artificial neural networks applied to prediction of surface roughness in AISI 52100 hardened Steel turning

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Describing fatigue crack growth and load ratio effects in Al 2524 T3 alloy with an enhanced exponential model

The fatigue crack behavior in metals and alloys under constant amplitude test conditions is usually described by relationships between the crack growth rate da/dN and the stress intensity factor range Delta K. In the present work, an enhanced two-parameter exponential equation of fatigue crack growth was introduced in order to describe sub-critical crack propagation behavior of Al 2524-T3 alloy, commonly used in aircraft engineering applications. It was demonstrated that besides adequately correlating the load ratio effects, the exponential model also accounts for the slight deviations from linearity shown by the experimental curves. A comparison with Elber, Kujawski and "Unified Approach" models allowed for verifying the better performance, when confronted to the other tested models, presented by the exponential model. (C) 2012 Elsevier Ltd. All rights reserved.

Molecular assay optimized by Taguchi experimental design method for venous thromboembolism investigation

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Single-phase high power-factor boost ZCS pre-regulator operating in critical conduction mode

This paper presents a new single-phase interleaved high power factor boost pre-regulator operating in critical conduction mode, where the switches and boost diode performing zero-current commutations during its turn-off, eliminating the disadvantages related to the reverse recovery losses and electromagnetic interference problems of the boost diode, when operating in the continuous conduction mode. The interleaving technique is applied in the power cell, providing a significant input current ripple reduction in comparison to discontinuous mode of operation, due to its input current continuous conduction operation. This paper presents a complete modeling for the converter operating in critical conduction mode, resulting in an improved design procedure for interleaved techniques with high input power factor, a complete design procedure, and main simulation results from a design example with two interleaved cells rated at 1kW, 400V output voltage and 220V rms input voltage.

A novel voltage step-down/up ZCS-PWM Zeta converter

This paper presents an analysis of a novel pulse-width-modulated (PWM) voltage step-down/up Zeta converter, featuring zero-current-switching (ZCS) at the active switches. The applications in de to de and ac to de (rectifier) operation modes are used as examples to illustrate the performance of this new ZCS-PWM Zeta converter. Regarding to the new ZCS-PWM Zeta rectifier proposed, it should be noticed that the average-current mode control is used in order to obtain a structure with high power-factor (HPF) and low total harmonic distortion (THD) at the input current.Two active switches (main and auxiliary transistors), two diodes, two small resonant inductors and one small resonant capacitor compose the novel ZCS-PWM soft-commutation cell, used in these new ZCS-PWM Zeta converters. In this cell, the turn-on of the active switches occurs in zero-current (ZC) and their turn-off in zero-current and zero-voltage (ZCZV). For the diodes, their turn-on process occurs in zero-voltage (ZV) and their reverse-recovery effects over the active switches are negligible. These characteristics make this cell suitable for Insulated-Gate Bipolar Transistors (IGBTs) applications.The main advantages of these new Zeta converters, generated from the new soft-commutation cell proposed, are possibility of obtaining isolation (through their accumulation inductors), and high efficiency, at wide load range. In addition, for the rectifier application, a high power factor and low THD in the input current ran be obtained, in agreement with LEC 1000-3-2 standards.The principle of operation, the theoretical analysis and a design example for the new de to de Zeta converter operating in voltage step-down mode are presented. Experimental results are obtained from a test unit with 500W output power, 110V(dc) output voltage, 220V(dc) input voltage, operating at 50kHz switching frequency. The efficiency measured at rated toad is equal to 97.3%for this new Zeta converter.Finally, the new Zeta rectifier is analyzed, and experimental results from a test unit rated at 500W output power, 110V(dc) output voltage, 220V(rms) input voltage, and operating at 50kHz switching frequency, are presented. The measured efficiency is equal to 96.95%, the power-factor is equal to 0.98, and the input current THD is equal to 19.07%, for this new rectifier operating at rated load.

Load compensation in four-wire electrical power systems

This work describes a methodology for power factor control and correction of the unbalanced currents in four-wire electric circuits. The methodology is based on the insertion of two compensation networks, one wye-grounded neutral and another in delta, in parallel to the load. The mathematical development has been proposed in previous work [3]. In this paper, however, the methodology was adapted to accept different power factors for the system to be compensated. on the other hand, the determination of the compensation susceptances is based on the instantaneous values of the load currents. The results are obtained using the MatLab - Simulink environment.

Short-Term Multinodal Load Forecasting Using a Modified General Regression Neural Network

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Autoimmune thyroid disease as a risk factor for angioedema in patients with chronic idiopathic urticaria: a case-control study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Serum inhibin A and angiogenic factor levels in pregnancies with previous preeclampsia and/or chronic hypertension: are they useful markers for prediction of subsequent preeclampsia?

OBJECTIVE: Our objective was to determine whether measurement of placenta growth factor (PLGF), inhibin A, or soluble fms-like tyrosine kinase-1 (sFlt-1) at 2 times during pregnancy would usefully predict subsequent preeclampsia ( PE) in women at high risk. STUDY DESIGN: We analyzed serum obtained at enrollment (12(0/7) to 19(6/7) weeks) and follow-up (24-28 weeks) from 704 patients with previous PE and/or chronic hypertension (CHTN) enrolled in a randomized trial for the prevention of PE. Logistic regression analysis assessed the association of log-transformed markers with subsequent PE; receiver operating characteristic analysis assessed predictive value. RESULTS: One hundred four developed preeclampsia: 27 at 37 weeks or longer and 77 at less than 37 weeks (9 at less than 27 weeks). None of the markers was associated with PE at 37 weeks or longer. Significant associations were observed between PE at less than 37 weeks and reduced PLGF levels at baseline (P =.022) and follow-up (P <.0001) and elevated inhibin A (P <.0001) and sFlt-1 (P =.0002) levels at follow-up; at 75% specificity, sensitivities ranged from 38% to 52%. Using changes in markers from baseline to follow-up, sensitivities were 52-55%. Associations were observed between baseline markers and PE less than 27 weeks (P <=.0004 for all); sensitivities were 67-89%, but positive predictive values (PPVs) were only 3.4-4.5%. CONCLUSION: Inhibin A and circulating angiogenic factors levels obtained at 12(0/7) to 19(6/7) weeks have significant associations with onset of PE at less than 27 weeks, as do levels obtained at 24-28 weeks with onset of PE at less than 37 weeks. However, because the corresponding sensitivities and/or PPVs were low, these markers might not be clinically useful to predict PE in women with previous PE and/or CHTN.

Mild gestational hyperglycaemia as a risk factor for metabolic syndrome in pregnancy and adverse perinatal outcomes

Objective The aims of this study were to evaluate the prevalence of metabolic syndrome (MS) in a cohort of pregnant women with a wide range of glucose tolerance, pre-pregnancy risk factors for MS during pregnancy and the effects of MS in the occurrence of adverse perinatal outcomes.Research Design and Methods One hundred and thirty six women with positive screening for gestational diabetes (GDM) were classified by two diagnostic methods: glycaemic profile and 100 g oral glucose tolerance test (OGTT) as normoglycaemic, mild gestational hyperglycaemic, GDM, and overt GDM. Markers of insulin resistance were measured between 24-28 and 36th week of gestation, and 6 weeks after delivery.Results The prevalence of MS was 0; 20.0; 23.5 and 36.4% in normoglycaemic, mild hyperglycaemic, GDM and overt GDM groups, respectively. Previous history of GDM with or without insulin use, body mass index (BMI) >= 25, hypertension, family history of diabetes in first-degree relatives, non-Caucasian ethnicity, history of prematurity and polyhydramnios were statistically significant pre-pregnancy predictors for MS in the index pregnancy, that by its turn increased the occurrence of adverse perinatal outcomes (p = 0.01).Conclusions The prevalence of MS increases with the worsening of glucose tolerance and is an independent predictor of adverse perinatal outcomes; impaired glycaemic profile identifies pregnancies with important metabolic abnormalities that are linked to the occurrence of adverse perinatal outcomes even in the presence of a normal OGTT, in patients that are not currently classified as having GDM. Copyright (C) 2008 John Wiley & Sons, Ltd.

Influence of Implant Design on the Biomechanical Environment of Immediately Placed Implants: Computed Tomography-Based Nonlinear Three-Dimensional Finite Element Analysis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Alcohol dehydrogenase 3 genotype as a risk factor for upper aerodigestive tract cancers

Objective: To assess alcohol dehydrogenase 3 (ADH3) polymorphism at position Ile349Val as indicator of risk factor for upper aerodigestive tract (UADT) cancer to verify its association with UADT cancer in nonalcoholic or nonsmoking individuals.Design: Cross-sectional study.Setting: Primary care or referral center.Patients: the study group consisted of 141 consecutive patients with newly diagnosed squamous cell carcinoma of the oral cavity, oropharynx, hypopharynx, or larynx admitted for surgical treatment. The comparison group consisted of 94 inpatients without cancer from the A. C. Camargo or other São Paulo (Brazil) hospital and 40 healthy individuals.Intervention: All participants were interviewed and data were collected using a structured questionnaire. After written informed consent was obtained, 20 mL of blood was collected in heparinized tubes.Main Outcome Measures: Odds ratio for ADH3 genotypes using logistic regression models.Results: After adjustment for sex, age, tobacco use, and history of cancer in first-degree family relatives, a significantly higher odds ratio for UADT cancer was observed among individuals with AA genotype and low cumulative alcohol consumption (:5 100 kg of ethanol) (odds ratio=3.8 [95% confidence interval, 1.5-9.7]). A 4-fold increase in odds ratio for UADT cancer among individuals with AA genotype and low tobacco consumption (:525 pack-years) was also found in the adjusted model.Conclusions: These results suggest that genotype AA may be a risk factor for UADT cancer, especially in individuals with low alcohol or tobacco consumption. However, further epidemiological case-control or cohort studies, preferably prospective, are needed to establish the exact role of ADH3 polymorphism and its association with the development of UADT cancers.

FLOW PROPERTIES and TUBE FRICTION FACTOR of MILK CREAM: INFLUENCE of TEMPERATURE and FAT CONTENT

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)