Assessment of the effectiveness of light-emitting diode and diode laser hybrid light sources to intensify dental bleaching treatment

Objective. To evaluate the effectiveness of the color change of hybrid light-emitting diode (LED) and low-intensity infrared diode laser devices for activating dental bleaching and to verify the occurrence of a color regression with time. Material and methods. A total of 180 specimens obtained from human premolars were immersed in a coffee solution for 15 days for darkening and then divided into eight experimental groups (n = 20 in each) as follows: G1, bleaching without light; G2, bleaching with halogen light; G3, bleaching with a blue LED (1000 mW/470 nm) and a laser device (120 mW/795 nm) simultaneously; G4, bleaching with an LED emitting blue light (1000 mW/470 nm); G5, bleaching with a blue LED (800 mW/470 nm) and a laser device (500 mW/830 nm) simultaneously; G6, bleaching with a blue LED device (800 mW); G7, bleaching with a green LED (600 mW/530 nm) and a laser device (120 mW/795 nm) simultaneously; and G8, bleaching with a green LED (600 mW). Three measurements were performed (at baseline and 14 days and 12 months after bleaching) using a Vita Easyshade spectrophotometer. The data were submitted to two-way ANOVA and a Tukey test. Results. All groups showed significantly higher Delta E values than Group G1, with the exception of Group G8. Variations in the Delta E values at 14 days were significant when compared with those obtained at baseline and after 12 months. Conclusions. Light activation of the bleaching gel provided faster and more intense bleaching than use of the bleaching gel without light activation. Combinations of low-intensity diode lasers are ineffective as a bleaching gel activator. Color regression was observed after 12 months of storage.

Psicologia social e processo grupal: a coerência entre fazer, pensar sentir em Sívia Lane

O presente artigo trata da concepção histórica e dialética de processo grupal proposta por Sílvia Lane, que utiliza como base para suas reflexões os pressupostos de materialismo dialético quando considera os aspectos pessoais, as características grupais, a vivência subjetiva e a realidade objetiva e o caráter histórico do grupo. O que pretendemos enfatizar neste artigo é a produção sobre grupo presente em sua obra que foi se construindo no decorrer das décadas de 1980 e 1990, sintetizada no texto O processo grupal. Neste sentido, busca-se trazer as contribuições presentes no conjunto de sua obra, sistematizadas em artigos, coletâneas e livros, em que Sílvia Lane discute a articulação de algumas categorias fundamentais para a análise do processo grupal e suas implicações teóricas, metodológicas e prático-políticas.

Effect of electrical stimulation of the cranial tibial muscle after end-to-side neurorrhaphy of the peroneal nerve in rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Animal model of rapid crystalloid infusion in rats

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Restriction fragment analysis of the ribosomal DNA of Paratelmatobius and Scythrophrys species (Anura, Leptodactylidae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efeitos dentoesqueléticos produzidos pelo aparelho de Herbst na dentadura mista

OBJETIVO: o objetivo desta pesquisa clínica prospectiva foi avaliar as alterações cefalométricas dentárias e esqueléticas produzidas pelo aparelho de Herbst em jovens com má oclusão de Classe II, 1ª divisão durante a dentadura mista. METODOLOGIA: trinta jovens (15 do gênero masculino e 15 do feminino) com idade média inicial de 9 anos e 10 meses foram tratados com o aparelho de Herbst por um período de 12 meses. Para a comparação dos grupos utilizou-se uma amostra controle de 30 jovens (15 do gênero masculino e 15 do feminino) Classe II, 1ª divisão, com idade média inicial de 9 anos e 8 meses, que foram mantidos sem tratamento durante 12 meses. Para cada jovem foram utilizadas duas telerradiografias em norma lateral, obtidas ao início e no final do período de acompanhamento. Utilizou-se um método convencional de avaliação cefalométrica e o método proposto por Pancherz. RESULTADOS E CONCLUSÕES: os resultados deste estudo demonstraram que os efeitos do aparelho de Herbst produzidos na dentadura mista foram primariamente de natureza dentoalveolar. Os incisivos inferiores foram inclinados para vestibular e os superiores foram retruídos; também houve uma extrusão significante dos molares inferiores, enquanto os superiores sofreram restrição de desenvolvimento no sentido vertical. Não houve diferença significante de restrição do crescimento anterior da maxila entre os dois grupos. No sentido vertical da face, a altura facial ântero-inferior se comportou de forma similar, não demonstrando alteração significante entre os grupos. O tratamento com o aparelho de Herbst produziu um aumento modesto, porém, significante no comprimento da mandíbula comparado ao grupo controle. Este aumento, entretanto, foi de menor magnitude que aquele observado em pacientes adolescentes utilizando o mesmo protocolo de tratamento. A correção do overjet (Herbst) ocorreu devido a 22% de alterações esqueléticas e 78% de alterações dentárias. A correção da relação molar ocorreu devido a 27% de alterações esqueléticas e 73% de alterações dentárias.

Residual monomer of reline acrylic resins - Effect of water-bath and microwave post-polymerization treatments

Objectives. This study compared the residual monomer (RM) in four hard chair-side reline resins (Duraliner II-D, Kooliner-K, Tokuso Rebase Fast-TRF and Ufi Gel hard-UGH) and one heat-polymerized denture base resin (Lucitone 550-L), which was processed using two polymerization cycles (short-LS and long-LL). It was also investigated the effect of two after polymerization treatments on this RM content.Methods. Specimens (n = 18) of each material were produced following the manufacturers' instructions and then divided into three groups. Group I specimens were left untreated (GI-control). Specimens of group II (GII) were given post-polymerization treatment by microwave irradiation. In group III (GIII), specimens were submitted to immersion in water at 55 degrees C (reline resins-10 min; denture base resin L-60min). The RM was analyzed using high performance liquid chromatography (HPLC) and expressed as a percentage of RM. Data were analyzed by two-way ANOVA followed by Tukey's test (alpha = 0.05).Results. Comparing control specimens, statistical differences were found among all materials (p < 0.05), and the results can be arranged as K (1.52%) > D (0.85%) > UGH (0.45%) > LL (0.24%) > TRF (0.14%) > LS (0.08%). Immersion in hot water (GIII) promoted a significant (p < 0.05) reduction in the RM for all materials evaluated compared to control (GI), with the exception of LL specimens. Materials K, UGH and TRF exhibited significantly (p < 0.05) lower values of RM after microwave irradiation (GII) than in the control specimens.Significance. The reduction in RM promoted by water-bath and microwave post-polymerization treatments could improve the mechanical properties and biocompatibility of the relining and denture base materials. (c) 2006 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

The effect of ceramic surface treatment on bonding to densely sintered alumina ceramic

Statement of problem. Ceramic surface treatment is crucial for bonding to resin. High crystalline ceramics are poorly conditioned using traditional procedures.Purpose. The purpose of this study was to evaluate the effect of silica coating on a densely sintered alumina ceramic relative to its bond strength to composite, using a resin luting agent.Material and methods. Blocks (6 X 6 X 5 mm) of ceramic and composite were made. The ceramic (Procera AllCeram) surfaces were polished, and the blocks were divided into 3 groups (n = 5): SB, airborne-particle abrasion with 110-mu m Al(2)O(3); RS, silica coating using Rocatec System; and CS, silica coating using CoJet System. The treated ceramic blocks were luted to the composite (W3D Master) blocks using a resin luting agent (Panavia F). Specimens were stored in distilled water at 37 degrees C for 7 days and then Cut in 2 axes, x and y, to obtain specimens with a bonding area of approximately 0.6 mm(2) (n = 30). The specimens were loaded to failure in tension in a universal testing machine, and data were statistically analyzed using a randomized complete block design analysis of variance and Tukey's test (alpha=.05). Fractured surfaces were examined using light microscopy and scanning electron microscopy to determine the type of failure. Energy-dispersive spectroscopy was used for surface compositional analysis.Results. Mean bond strength values (MPa) of Groups RS (17.1 +/- 3.9) (P = .00015) and CS (18.5 +/- 4.7) (P=.00012) were significantly higher than the values of Group SB (12.7 +/- 2.6). There was no statistical difference between Groups RS and CS. All failures occurred at the adhesive zone.Conclusion. Tribochemical silica coating systems increased the tensile bond strength values between Panavia F and Procera AllCeram ceramic.

Effect of porcine reproductive and respiratory syndrome virus on subsequent Pasteurella multocida challenge in pigs

This trial was conducted to evaluate the effect of Porcine reproductive and respiratory syndrome virus (PRRSv) on a subsequent challenge with Pasteurella multocida in pigs. Sixteen, 3-4 week-old piglets, from a PRRSv and Aujeszky disease virus (ADV) free herd were used. Animals were equally and randomly allocated in four groups which were treated according the following schedule: Group I: negative controls; Group II: inoculation with only PRRSV; Group III: inoculation with PRRSV and P. multocida; Group IV: inoculation with ADV and multocida (positive controls), PRRSV and ADV were inoculated intranasally, at the doses of 10(4.6) and 10(4.5) TCID50/ml, respectively. Five days later, pigs from groups III and IV were inoculated intranasally, with two ml of a 10(9) CFU/mL suspension of equal parts of P. multocida, strains A52 and A24. No lesions were observed in piglets of group I. Microscopically, interstitial pneumonia was identified in all piglets of groups II and III and 3/4 piglets from group IV. Bronchopneumonia was detected in 3/4 of the piglets from group III and in all animals of group TV which, additionally, showed meningo-encephalitis and purulent rhinitis. Macroscopically, only piglets of groups III and IV had lung consolidation. However, much lower pneumonic scores (2.3%) were observed in group III, where 3 of 4 piglets were affected. on the other hand, all piglets of group IV showed some degree of pulmonary consolidation, with a mean score of 13.7%. Based on these results, it appears that the role of PRRSV as a initiator of secondary diseases is still undefined, but is probably mild, There was no clear interaction between PRRSV and Pasteurella multocida under the conditions and strains tested here. (C) 1997 Elsevier B.V. B.V.

Fibrin adhesive implant in wound healing repair of dental sockets with topical application of epsilon aminocaproic acid: Histological analysis

The aim of the study was to evaluate wound healing repair of dental sockets after topical application of 5% epsilon-aminocaproic acid (EACA) and the use of fibrin adhesive implant in rats under anticoagulant therapy with warfarin. Sixty Albinus wistar rats were used, divided into three groups of 20. In Group I, the animals were given 0.1 mL/100 mg of 0.9% saline solution per day, beginning 6 days before dental extraction and continuing throughout the experimental period. In Group II, the animals received 0.03 mL of sodium warfarin daily, beginning 6 days before the surgery and continuing until the day of sacrifice; after tooth extractions, the sockets were filled with fibrin adhesive material. In Group III the animals were treated as in Group II, and after extractions, the sockets were irrigated with 5 mL of 5% EACA and filled with the same fibrin adhesive material. All groups presented biological phases of wound healing repair, the differences being evident only in the chronology. The results obtained in Group III were very similar to those of Group I in the last period of wound repair, whereas Group II presented a late chronology compared to the other groups. © 2005 Wiley Periodicals, Inc.

Assignment of the disulfide bridges in bothropstoxin-I, a myonecrotic Lys49 PLA(2) homolog from Bothrops jararacussu snake venom

Bothropstoxin-I (BthTX-1), a Lys49 phospholipase A(2) homolog with no apparent catalytic activity, was first isolated from Bothrops jararacussu snake venom and completely sequenced in this laboratory. It is a 121-amino-acid single polypeptide chain, highly myonecrotic, despite its inability to catalyze hydrolysis of egg yolk phospholipids, and has 14 half-cystine residues identified at positions 27, 29, 44, 45, 50, 51, 61, 84, 91, 96, 98, 105, 123, and 131 (numbering according to the conventional alignment including gaps, so that the last residue is Cys 131). In order to access its seven disulfide bridges, two strategies were followed: (1) Sequencing of isolated peptides from (tryptic + SV8) and chymotryptic digests by Edman-dansyl degradation; (2) crystallization of the protein and determination of the crystal structure so that at least two additional disulfide bridges could be identified in the final electron density map. Identification of the disulfide-containing peptides from the enzymatic digests was achieved following the disappearance of the original peptides from the HPLC profile after reduction and carboxymethylation of the digest. Following this procedure, four bridges were initially identified from the tryptic and SV8 digests: Cys50-Cys131, Cys51-Cys98, Cys61-Cys91, and Cys84-Cys96. From the chymotryptic digest other peptides were isolated either containing some of the above bridges, therefore confirming the results from the tryptic digest, or presenting a new bond between Cys27 and Cys123. The two remaining bridges were identified as Cys29-Cys45 and Cys44-Cys105 by determination of the crystal structure, showing that BthTX-1 disulfide bonds follow the normal pattern of group II PLA(2)s.

Texture and Microstructure of Gelatin/Corn Starch-Based Gummy Confections

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Effects of environmental colour on growth of Nile tilapia, Oreochromis niloticus (Linnaeus, 1758), maintained individually or in groups

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Rat nephrotoxic nephritis. The relation between the type and intensity of induced histological lesions and the content of antiglomerular basement membrane antibodies of the inoculated serum

Six groups of 6 rats received equal doses (0.8 ml/100 g of body weight) of different rabbit anti rat kidney sera. The titer of anti GBM antibodies in the sera was evaluated by indirect immunofluorescent test in isolated GBM (IIT GBM). Rats of groups 1, 2, 3, 5, 6 received anti rat GBM sera with titers of 1/320, 1/240, 1/160, 1/60, 1/30 respectively. Group 4 received anti rat kidney serum with a titer of 1/80. The rats of group 1 died from 1 to 5 minutes after inoculation and their kidney were congested, with hialine trombi occluding arterioles and glomerular capillaries. The rats of group 2 and one of group 3 died from 2 to 15 days after inoculation and diffuse cortical necrosis was found. The remaining rats were sacrificed 2 months after inoculation. The kidneys were normal in control group; chronic membranoproliferative glomerulonephritis was observed in group 3 and 4, membranoproliferative glomerulonephritis in group 5 and minimal changes in group 6. By immunofluorescence rabbit gammaglobulin was seen in GBM of group 3, 4, 5 and 6. The IIT GBM performed in the eluates of the kidneys revealed the presence of heterologous antibody in groups 1, 2, 3, 4, 5 and 6 and autologous antibody in groups 3, 4 and 5. One concludes that the IIT GBM identifies and quantifies antibodies which have the property of damaging the kidney.

Assignment of the bisulfide bridges in bothropstoxin-I, a Myonecrotic Lys49 PLA2 homolog from bothrops jararacussu snake venom

Bothropstoxin-I (BthTX-I), a Lys49 phospholipase A2 homolog with no apparent catalytic activity, was first isolated from Bothrops jararacussu snake venom and completely sequenced in this laboratory. It is a 121-amino-acid single polypeptide chain, highly myonecrotic, despite its inability to catalyze hydrolysis of egg yolk phospholipids, and has 14 half-cystine residues identified at positions 27, 29, 44, 45, 50, 51, 61, 84, 91, 96, 98, 105, 123, and 131 (numbering according to the conventional alignment including gaps, so that the last residue is Cys 131). In order to access its seven disulfide bridges, two strategies were followed: (1) Sequencing of isolated peptides from (tryptic + SV8) and chymotryptic digests by Edman-dansyl degradation; (2) crystallization of the protein and determination of the crystal structure so that at least two additional disulfide bridges could be identified in the final electron density map. Identification of the disulfide-containing peptides from the enzymatic digests was achieved following the disappearance of the original peptides from the HPLC profile after reduction and carboxymethylation of the digest. Following this procedure, four bridges were initially identified from the tryptic and SV8 digests: Cys50-Cysl31, Cys51-Cys98, Cys61-Cys91, and Cys84-Cys96. From the chymotryptic digest other peptides were isolated either containing some of the above bridges, therefore confirming the results from the tryptic digest, or presenting a new bond between Cys27 and Cys 123. The two remaining bridges were identified as Cys29-Cys45 and Cys44-Cysl05 by determination of the crystal structure, showing that BthTX-I disulfide bonds follow the normal pattern of group II PLA2s. © 2001 Plenum Publishing Corporation.