Micromorphologic assessment of CVD (chemical vapor deposition) and conventional diamond tips and their cutting effectiveness

The aim of this study was to compare the micromorphology of CVD diamond tips coupled to ultrasound with conventional high speed diamond tips after cavity preparations, and to measure the width and depth of the cavities obtained. Two hundred bovine teeth were divided into 20 subgroups. Each of the diamond tips (10 CVD and 10 conventional) were used to prepare 10 standardized cavities, using an apparatus that controlled the time (t: 27 s), speed (5.3 mm/s) and load (0.012 KGF) of the tip against the teeth during preparation. The unused and the used (after one, five and 10 preparations) tips were analyzed by scanning electronic microscopy. The images were randomly assessed by 3 examiners with regard to the presence or absence of micromorphologic alterations. Cavity measurements were made after visualization under a stereoscopic microscope. Cavity widths and depths were analyzed by the ANOVA Factorial test (p < 0.05). The CVD diamond tips presented less wear than the conventional tips after all the cavity preparations performed, but produced shallower cavities that were equivalent in width to those made by conventional tips after the fifth preparation. CVD diamond tips may be suggested as an alternative to conventional diamond tips due to their conservative preparation and greater longevity.

Influence of microwave sterilization on the cutting capacity of carbide burs

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Microscopic evidence supports the hypothesis of high cellulose degradation capacity by the symbiotic fungus of leaf-cutting ants

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fat body in some genera of leaf-cutting ants (Hymenoptera : Formicidae). Proteins, lipids and polysaccharides detection

The comparative histochemical analysis of the fat body of workers belonging to the basal species Cyphomyrmex rimosus and Mycetarotes parallelus and to derived species Acromyrmex disciger and Atta laevigata revealed that this tissue is constituted mainly by cells denominated trophocytes and oenocytes. The trophocytes of all species studied here were characterized mainly by the proteins and lipids synthesis and storage, being the derived species the ones who have presented higher quantity of lipids in the trophocytes when compared to the trophocytes of basal species. In workers M. parallelus and A. laevigata, besides proteins and lipids, there has being observed the presence of polysaccharides, however, in C. rimosus and A. disciger these elements were detected in lower quantities. The histochemical studies of the oenocytes of basal and derived species revealed significant presence of proteins as well as lipids in these cells. In the oenocytes of derived species A. disciger and A. laevigata a higher quantity of lipidic inclusions has being observed, when compared to the basal species. (c) 2005 Elsevier Ltd. All rights reserved.

The intramandibular gland of leaf-cutting ants (Atta sexdens rubropilosa Forel 1908)

The eusociality developed in Hymenoptera and Isoptera is driven by an efficient interaction between exocrine glands and jointed appendages, both in close interaction with the environment. In this context, the mandible of ants plays an important role, since, in addition to being the main jointed appendage, it possess glandular functions. As an example we might name the two glands associated with the mandible: the mandibular and the intramandibular glands. The intramandibular gland is found inside the mandible and consists of a hypertrophied secretory epithelium and secretory cells in the mandible's lumen. The secretion of the secretory epithelium is liberated through intracuticular ducts that open at the base of hairs at the mandible's surface. The secretion of the intramandibular gland (epithelium and secretory cells) reacted positively to tests for the detection of polysaccharides and proteins, thus suggesting that it consists of glycoproteins. The ultrastructure of the secretor epithelium presents variations related to the developmental stage of the individual, showing a large number of ribosomes and microvilli close to the cuticle in young individuals, while in the older specimens it was possible to note the formation of ail intracellular reservoir. These variations of secretory epithelium, as also the interaction between the cellular groups inside the mandible, are important information about this gland in leaf-cutting ants. (c) 2005 Elsevier Ltd. All rights reserved.

The functional morphology of the metapleural gland of the leaf-cutting ant Atta laevigata (Formicidae: Attini)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Secretory Profile of Metapleural Gland Cells of the Leaf-Cutting Ant Acromyrmex coronatus (Formicidae: Attini)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Leaf-cutting ant faecal fluid and mandibular gland secretion: effects on microfungi spore germination

The mandibular gland secretion (MGS) and the faecal fluid (FF) of the leaf-cutting ant Atta sexdens rubropilosa Forel affected the spore germination of selected microfungi isolated from nests of this insect. MGS was more effective than the FF, completely inhibiting the spore germination of four out of six microfungi species.

Antagonistic interactions between garden yeasts and microfungal garden pathogens of leaf-cutting ants

We investigate the diversity of yeasts isolated in gardens of the leafcutter ant Atta texana. Repeated sampling of gardens from four nests over a 1-year time period showed that gardens contain a diverse assemblage of yeasts. The yeast community in gardens consisted mostly of yeasts associated with plants or soil, but community composition changed between sampling periods. In order to understand the potential disease-suppressing roles of the garden yeasts, we screened isolates for antagonistic effects against known microfungal garden contaminants. In vitro assays revealed that yeasts inhibited the mycelial growth of two strains of Escovopsis (a specialized attine garden parasite), Syncephalastrum racemosum (a fungus often growing in gardens of leafcutter lab nests), and the insect pathogen Beauveria bassiana. These garden yeasts add to the growing list of disease-suppressing microbes in attine nests that may contribute synergistically, together with actinomycetes and Burkholderia bacteria, to protect the gardens and the ants against diseases. Additionally, we suggest that garden immunity against problem fungi may therefore derive not only from the presence of disease-suppressing Pseudonocardia actinomycetes, but from an enrichment of multiple disease-suppressing microorganisms in the garden matrix.

Yeasts and filamentous fungi carried by the gynes of leaf-cutting ants

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Activities of Extracts and Compounds from Spiranthera odoratissima St. Hil. (Rutaceae) in Leaf-cutting Ants and their Symbiotic Fungus

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Generation of Nutrients and Detoxification: Possible Roles of Yeasts in Leaf-Cutting Ant Nests.

The possible roles played by yeasts in attine ant nests are mostly unknown. Here we present our investigations on the plant polysaccharide degradation profile of 82 yeasts isolated from fungus gardens of Atta and Acromyrmex species to demonstrate that yeasts found in ant nests may play the role of making nutrients readily available throughout the garden and detoxification of compounds that may be deleterious to the ants and their fungal cultivar. Among the yeasts screened, 65% exhibited cellulolytic enzymes, 44% exhibited pectinolytic activity while 27% and 17% possess enzyme systems for the degradation of protease and amylase, respectively. Galacturonic acid, which had been reported in previous work to be poorly assimilated by the ant fungus and also to have a negative effect on ants' survival, was assimilated by 64% and 79% of yeasts isolated from nests of A. texana and Acromyrmex respectively. Our results suggest that yeasts found in ant nests may participate in generation of nutrients and removal of potentially toxic compounds, thereby contributing to the stability of the complex microbiota found in the leaf-cutting ant nests.

The Influence of Cutting Speed and Cutting Initiation Location in Specimen Preparation for the Microtensile Bond Strength Test

Purpose: This study evaluated the effect of cutting initiation location and cutting speed on the bond strength between resin cement and feldspathic ceramic.Materials and Methods: Thirty-six blocks (6.4 x 6.4 x 4.8 mm) of ceramic (Vita VM7) were produced. The ceramic surfaces were etched with 10% hydrofluoric acid gel for 60 s and then silanized. Each ceramic block was placed in a silicon mold with the treated surface exposed. A resin cement (Variolink II) was injected into the mold over the treated surface and polymerized. The resin cement-ceramic blocks were divided into two groups according to experimental conditions: a) cutting initiation location - resin cement, ceramic and interface; and b) cutting speed - 10,000, 15,000, and 20,000 rpm. The blocks were sectioned to achieve non-trimmed bar specimens. The microtensile test was performed in a universal testing machine (1 mm/min). The failure modes were examined using an optical light microscope and SEM. Bond strength results were analyzed using one-way ANOVA and Tukey's test (alpha = 0.05).Results: Significant influences of cutting speed and initiation location on bond strength (p < 0.05) were observed. The highest mean was achieved for specimens cut at 15,000 rpm at the interface (15.12 +/- 5.36 MPa). The lowest means were obtained for specimens cut at the highest cutting speed in resin cement (8.50 +/- 3.27 MPa), and cut at the lowest cutting speed in ceramic (8.60 +/- 2.65MPa). All groups showed mainly mixed failure (75% to 100%).Conclusion: The cutting speed and initiation location are important factors that should be considered during specimen preparation for microtensile bond strength testing, as both may influence the bond strength results.

Petroleum well drilling monitoring through cutting image analysis and artificial intelligence techniques

Petroleum well drilling monitoring has become an important tool for detecting and preventing problems during the well drilling process. In this paper, we propose to assist the drilling process by analyzing the cutting images at the vibrating shake shaker, in which different concentrations of cuttings can indicate possible problems, such as the collapse of the well borehole walls. In such a way, we present here an innovative computer vision system composed by a real time cutting volume estimator addressed by support vector regression. As far we know, we are the first to propose the petroleum well drilling monitoring by cutting image analysis. We also applied a collection of supervised classifiers for cutting volume classification. (C) 2010 Elsevier Ltd. All rights reserved.

Attractiveness of copperleaf-based bait to leaf-cutting ants

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)