Detection of estrogen receptor in formalin-fixed and paraffin-embedded breast carcinoma: correlation with histological patterns.

The authors studied the expression of estrogen receptor (ER) in tissues of breast carcinomas which were previously fixed in formalin and paraffin-embedded. The ER expression was correlated with several histological findings, namely grade of differentiation, tumor necrosis, desmoplasia, lymphocytic infiltration and elastosis. The ER was detected in tissues using the avidin-biotin immunoperoxidase technique associated with the H222 monoclonal antibody from Abbott. All 39 biopsies were of infiltrating ductal carcinoma of breast and 16 of them expressed ER. The statistical analysis showed that the expression of ER was correlated with histological findings of good prognosis as well differentiated carcinomas, no tumor necrosis, absence or mild lymphocytic infiltration around the tumor cells and severe elastosis.

Genetic susceptibility to bleomycin: A twin study

The frequency of chromatid breaks was analysed in peripheral lymphocytes obtained from sixteen healthy monozygotic (MZ) and sixteen healthy dizygotic (DZ) pairs of twins. In addition, increases in the frequency of chromatid breaks, following in vitro treatment of whole blood with 0.03 unit/ml bleomycin (BLM), were analysed in the same twins. There was a highly significant intrapair difference in the variance of the frequency of chromatid breaks among MZ and DZ twins, before and after BLM treatment. The coefficient of heritability was 85,5% and it was concluded that genetic factors contributed significantly to the individual variation observed in BLM induced chromatid break rates.

Thermal decomposition and stability in a series of tetrafluorborate copper(I) complexes

Tetrafluorborate copper(I) complexes containing acetonitrile, triphenylphosphine, 1,10-phenanthroline, 2,2′-bipyridine and 2-quinolinethiol have been prepared in order to study their thermal stabilities as a function of the ligands present. The characterization of the above compounds was carried out by elemental analysis and IR spectroscopy. Their thermal behaviour has been investigated and the final products were identified by X-ray powder diagrams. © 1995.

Chromosome sensitivity to bleomycin in G2 lymphocytes from Down syndrome patients

Several studies have demonstrated that lymphocytes from patients with Down syndrome (DS) exhibit an increased frequency of chromosome aberrations when they are exposed to ionizing radiation or to chemicals at the G0 or G1 phases of the cell cycle, but not at G2 when compared to normal subjects. To determine the susceptibility of DS lymphocytes at G2 phase, bleomycin, a radiomimetic agent, was used to induce DNA breaks in blood cultures from 24 Down syndrome patients. All the patients with DS showed free trisomy 21 (47,XX + 21 or 47,XY + 21). Individuals that showed an average number of chromatid breaks per cell higher than 0.8 were considered sensitive to the drug. No control child showed susceptibility to bleomycin, and among the 24 patients with DS, only one was sensitive to the drug. No significant difference was observed between the two groups, regarding chromatid break frequencies in treated G2 lymphocytes. The distribution of bleomycin-induced breaks in each group of chromosomes was similar for DS and controls. No significant difference was found in the response to bleomycin between male and female subjects. Probably, the main factor involved in chromosome sensitivity of lymphocytes from patients with DS is the phase of the cell cycle in which the cell is treated.

Isolamento de fungos produtores de enzimas pectinolíticas

Soil samples collected in the campus, UNESP, Araraquara, SP, were employed to isolate and characterize fungi strains with potential pectinolytic enzymes. These enzymes have arisen great interest due to its increasing application in the food industry. Two hundred forty six strains were isolated based on the appearance of colony on PDA medium, morphology (septate mycelia, nonseptate conidiophore, black conidia, and clublike spore-bearing head), after 48 h of growth at 30°C. Strains were selected in solid medium containing pectin citrus as sole carbon source and 0.5% rutenium red. The characterization of pectinolytic production was performed in solid culture and batch fermentation medium containing pectin citrus. The enzyme pectinolytic production was evaluated at 30°C, without agitation in 100 mL of medium containing 2% pectin citrus, 0.2% ammonium sulphate, 0.2% magnesium sulphate, and 0.05% potassium phosphate. The maximum pectinolytic activity (15U/mL) was observed in the medium after Aspergillus sp CFCF-0492 growth, while Aspergillus sp CFCF-CC1 showed the higher level of the final biomass. The pectinolytic activity is more preserved when the fungi-spores were maintained in agar-Czapeck medium.

Genetic population data from Araraquara region (SP State, Brazil) using PowerPlex® 16 Systems

In the present study, allele frequency distributions for the 15 STR loci included in the PowerPlex® 16 Systems (Promega) were obtained from a sample of 55 unrelated individuals living in Araraquara region (SP, Brazil). The frequency of each allele for each locus tested, the exact test and the forensic and paternity parameters were calculated using POWERSTATS ver. 1.2 (Promega) and GENEPOP ver. 3.2 software. All loci are in the Hardy-Weinberg equilibrium and they reached a combined power discrimination of 0.999999999999999973 and combined power exclusion of 0.99999987, showing to be a powerful tool for paternity testing and individual identification in the population analyzed. © 2005 Elsevier B.V. All rights reserved.

Aspectos toxicológicos do bissulfito e outros agentes tóxicos sobre a síntese de glicerol-3-fosfato desidrogenase citoplasmá tica de levedura de panificação

The synthesis of intracellular glycerol-3-phosphate dehydrogenase (EC 1.1.1.8) in baker's yeast was investigated in submerged culture supplied with glucose or glycerol as sole carbon sources. Inhibitors of the glycolytic pathway, Krebs cycle and respiratory chain did not stimulate glycerol-3-phosphate dehydrogenase synthesis when added in low concentrations in up 7.5 × 10 -5 mol/L. The repression exercised by glucose on the synthesis of glycerol-3-phosphate dehydrogenase in YP-glucose medium was reduced by the addition of fermentation products and of sodium bisulfite. Synthesis of the enzyme was raised 22-110%. However, in YP-glycerol medium, the addition of 0.06% (w/v) sodium bisulfite reduced (29%) the synthesis of the enzyme, while 0.012% (v/v) acetaldehyde stimulated the synthesis of glycerol-3-phosphate dehydrogenase by 12%.

Effect of thermal cycling and disinfection on colour stability of denture base acrylic resin

Objectives: The purpose of this study was to investigate the effect of thermal cycling and disinfection on the colour change of denture base acrylic resin. Materials and Methods: Four different brands of acrylic resins were evaluated (Onda Cryl, QC 20, Classico and Lucitone). All brands were divided into four groups (n=7) determined according to the disinfection procedure (microwave, Efferdent, 4% chlorhexidine or 1% hypochlorite). The treatments were conducted three times a week for 60days. All specimens were thermal cycled between 5 and 55°C with 30-s dwell times for 1000 cycles before and after disinfection. The specimens' colour was measured with a spectrophotometer using the CIE L*a*b* system. The evaluations were conducted at baseline (B), after first thermal cycling (T 1), after disinfection (D) and after second thermal cycling (T 2). Colour differences (ΔE) were calculated between T 1 and B (T 1B), D and B (DB), and T 2 and B (T 2B) time-points. Results: The samples submitted to disinfection by microwave and Efferdent exhibited the highest values of colour change. There were significant differences on colour change between the time-points, except for the Lucitone acrylic resin. Conclusions: The thermal cycling and disinfection procedures significantly affected the colour stability of the samples. However, all values obtained for the acrylic resins are within acceptable clinical parameters. © 2012 The Gerodontology Society and John Wiley & Sons A/S.

Genome-Wide Analysis Reveals Selection for Important Traits in Domestic Horse Breeds

Intense selective pressures applied over short evolutionary time have resulted in homogeneity within, but substantial variation among, horse breeds. Utilizing this population structure, 744 individuals from 33 breeds, and a 54,000 SNP genotyping array, breed-specific targets of selection were identified using an FST-based statistic calculated in 500-kb windows across the genome. A 5.5-Mb region of ECA18, in which the myostatin (MSTN) gene was centered, contained the highest signature of selection in both the Paint and Quarter Horse. Gene sequencing and histological analysis of gluteal muscle biopsies showed a promoter variant and intronic SNP of MSTN were each significantly associated with higher Type 2B and lower Type 1 muscle fiber proportions in the Quarter Horse, demonstrating a functional consequence of selection at this locus. Signatures of selection on ECA23 in all gaited breeds in the sample led to the identification of a shared, 186-kb haplotype including two doublesex related mab transcription factor genes (DMRT2 and 3). The recent identification of a DMRT3 mutation within this haplotype, which appears necessary for the ability to perform alternative gaits, provides further evidence for selection at this locus. Finally, putative loci for the determination of size were identified in the draft breeds and the Miniature horse on ECA11, as well as when signatures of selection surrounding candidate genes at other loci were examined. This work provides further evidence of the importance of MSTN in racing breeds, provides strong evidence for selection upon gait and size, and illustrates the potential for population-based techniques to find genomic regions driving important phenotypes in the modern horse. © 2013 Petersen et al.

Genetic Diversity in the Modern Horse Illustrated from Genome-Wide SNP Data

Horses were domesticated from the Eurasian steppes 5,000-6,000 years ago. Since then, the use of horses for transportation, warfare, and agriculture, as well as selection for desired traits and fitness, has resulted in diverse populations distributed across the world, many of which have become or are in the process of becoming formally organized into closed, breeding populations (breeds). This report describes the use of a genome-wide set of autosomal SNPs and 814 horses from 36 breeds to provide the first detailed description of equine breed diversity. FST calculations, parsimony, and distance analysis demonstrated relationships among the breeds that largely reflect geographic origins and known breed histories. Low levels of population divergence were observed between breeds that are relatively early on in the process of breed development, and between those with high levels of within-breed diversity, whether due to large population size, ongoing outcrossing, or large within-breed phenotypic diversity. Populations with low within-breed diversity included those which have experienced population bottlenecks, have been under intense selective pressure, or are closed populations with long breed histories. These results provide new insights into the relationships among and the diversity within breeds of horses. In addition these results will facilitate future genome-wide association studies and investigations into genomic targets of selection. © 2013 Petersen et al.

Use of different carbon sources in cultivation of baker's yeast for production of glycerol-3-phosphate dehydrogenase

The physiological state of yeast cells changes during culture growth as a consequence of environmental changes (nutrient limitations, pH and metabolic products). Cultures that grow exponentially are heterogeneous cell populations made up of cells regulated by different metabolic and/or genetic control systems. The strain of baker's yeast selected by plating commercial compressed yeast was used for the production of glycerol-3- phosphate dehydrogenase. Glycerol-3-phosphate dehydrogenase (GPD) has been widely used in the enzyme assays with diverse compounds of industrial interest, such as glycerol or glycerol phosphate, as well as a number of important bioanalytical applications. Each cell state determines the level of key enzymes (genetic control), fluxes through metabolic pathways (metabolic control), cell morphology and size. The present study was carried out to determine the effects of environmental conditions and carbon source on GPD production from baker's yeast. Glucose, glycerol, galactose and ethanol were used as carbon sources. Glycerol and ethanol assimilations required agitation, which was dependent on the medium volume in the fermentation flask for the greatest accumulation of intracellular GPD. Enzyme synthesis was also affected by the initial pH of the medium and inoculum size. The fermentation time required for a high level of enzyme formation decreased with the inoculum size. The greatest amount of enzyme (0.45 U/ml) was obtained with an initial pH of 4.5 in the medium containing ethanol or glycerol. The final pH was maintained in YP-ethanol, but in the YP-glycerol the final pH increased to 6.9 during growth.

Effect of thermal cycling and disinfection on microhardness of acrylic resin denture base

The purpose of this study was to investigate the effect of thermal cycling and disinfection on the microhardness of acrylic resins denture base. Four different brands of acrylic resins were evaluated: Onda Cryl, QC 20, Classico and Lucitone. Each brand of acrylic resin was divided into four groups (n = 7) according to the disinfection method (microwave, Efferdent, 4% chlorhexidine and 1% hypochlorite). Samples were disinfected during 60 days. Before and after disinfection, samples were thermal cycled between 5-55 °C with 30-s dwell times for 1000 cycles. The microhardness was measured using a microhardener, at baseline (B), after first thermal cycling (T1), after disinfection (D) and after second thermal cycling (T2). The microhardness values of all groups reduced over time. QC-20 acrylic resin exhibited the lowest microhardness values. At B and T1 periods, the acrylic resins exhibited statistically greater microhardness values when compared to D and T2 periods. It can be concluded that the microhardness values of the acrylic resins denture base were affected by the thermal cycling and disinfection procedures. However, all microhardness values obtained herein are within acceptable clinical limits for the acrylic resins. © 2013 Informa UK Ltd.