Variable parameter and double sampling (X)over-bar charts in the presence of correlation: The Markov chain approach

The general assumption under which the (X) over bar chart is designed is that the process mean has a constant in-control value. However, there are situations in which the process mean wanders. When it wanders according to a first-order autoregressive (AR (1)) model, a complex approach involving Markov chains and integral equation methods is used to evaluate the properties of the (X) over bar chart. In this paper, we propose the use of a pure Markov chain approach to study the performance of the (X) over bar chart. The performance of the chat (X) over bar with variable parameters and the (X) over bar with double sampling are compared. (C) 2011 Elsevier B.V. All rights reserved.

Bivariate control charts with double sampling

In this article, we consider the T(2) chart with double sampling to control bivariate processes (BDS chart). During the first stage of the sampling, n(1) items of the sample are inspected and two quality characteristics (x; y) are measured. If the Hotelling statistic T(1)(2) for the mean vector of (x; y) is less than w, the sampling is interrupted. If the Hotelling statistic T(1)(2) is greater than CL(1), where CL(1) > w, the control chart signals an out-of-control condition. If w < T(1)(2) <= CL(1), the sampling goes on to the second stage, where the remaining n(2) items of the sample are inspected and T(2)(2) for the mean vector of the whole sample is computed. During the second stage of the sampling, the control chart signals an out-of-control condition when the statistic T(2)(2) is larger than CL(2). A comparative study shows that the BDS chart detects process disturbances faster than the standard bivariate T(2) chart and the adaptive bivariate T(2) charts with variable sample size and/or variable sampling interval.

Joint (X)over-bar and R charts with two-stage samplings

When joint (X) over bar and R charts are in use, samples of fixed size are regularly taken from the process, and their means and ranges are plotted on the (X) over bar and R charts, respectively. In this article, joint (X) over bar and R charts have been used for monitoring continuous production processes. The sampling is performed, in two stages. During the first stage, one item of the sample is inspected and, depending on the result, the sampling is interrupted if the process is found to be in control; otherwise, it goes on to the second stage, where the remaining sample items are inspected. The two-stage sampling procedure speeds up the detection of process disturbances. The proposed joint (X) over bar and R charts are easier to administer and are more efficient than the joint (X) over bar and R charts with variable sample size where the quality characteristic of interest can be evaluated either by attribute or variable. Copyright (C) 2004 John Wiley Sons, Ltd.

New tungstate fluorophosphate glasses

\A new class of tungstate fluorophosphate glasses was identified in the NaPO3-BaF2-WO3 ternary system. The variation of several physical properties was determined with respect to chemical composition. Characteristic temperatures, density and refractive index increase as tungsten oxide content increases. The optical transmission range and specially the energy bandgap depend of the WO3 amount. No crystallization could be observed for the Most WO3 concentrated vitreous samples (greater than or equal to20% molar). Color and optical properties of the glasses depend of the melting time because of the presence of reduced tungsten species like W5+ and W4+. In addition, photodarkening is observed in tungsten rich glass samples under UV laser illumination and this phenomenon can be reversible by heat treatment near the glass transition temperature. (C) 2004 Published by Elsevier B.V.

Surface effects on moving vortices in superconducting stripes

Size and surface dynamical effects are investigated in thin superconducting stripes with variable width. We perform numerical simulations of the vortex dynamics, with the inclusion of the surface confining potential and a random distribution of pinning centers. To fully characterize the vortex flow, we calculate the differential resistance, the transverse diffusion coefficient, the structure factor and the intensity of the Bragg peaks, as functions of the transport force. We found that surface effects induce a premature ordering of the flux line lattice, and the system displays plastic and smectic behavior only in a very narrow range of forces. (c) 2007 Elsevier B.V. All rights reserved.

Sn-polymetallic greisen-type deposits associated with late-stage rapakivi granites, Brazil: fluid inclusion and stable isotope characteristics

Tin-polymetallic greisen-type deposits in the Itu Rapakivi Province and Rondonia Tin Province, Brazil are associated with late-stage rapakivi fluorine-rich peraluminous alkali-feldspar granites. These granites contain topaz and/or muscovite or zinnwaldite and have geochemical characteristics comparable to the low-P sub-type topaz-bearing granites. Stockworks and veins are common in Oriente Novo (Rondonia Tin Province) and Correas (Itu Rapakivi Province) deposits, but in the Santa Barbara deposit (Rondonia Tin Province) a preserved cupola with associated bed-like greisen is predominant. The contrasting mineralization styles reflect different depths of formation, spatial relationship to tin granites, and different wall rock/fluid proportions. The deposits contain a similar rare-metal suite that includes Sri (+/-W, +/-Ta, +/-Nb), and base-metal suite (Zn-Cu-Pb) is present only in Correas deposit. The early fluid inclusions of the Correas and Oriente Novo deposits are (1) low to moderate-salinity (0-19 wt.% NaCl eq.) CO2-bearing aqueous fluids homogenizing at 245-450 degreesC, and (2) aqueous solutions with low CO2, low to moderate salinity (0-14 wt.% NaCl eq.), which homogenize between 100 and 340 T. In the Santa Barbara deposit, the early inclusions are represented by (1) low-salinity (5-12 wt.% NaCl eq.) aqueous fluids with variable CO2 contents, homogenizing at 340 to 390 T, and (2) low-salinity (0-3 wt.% NaCl eq.) aqueous fluid inclusions, which homogenize at 320380 degreesC. Cassiterite, wolframite, columbite-tantalite, scheelite, and sulfide assemblages accompany these fluids. The late fluid in the Oriente Novo and Correas deposit was a low-salinity (0-6 wt.% NaCl eq.) CO2-free aqueous solution, which homogenizes at (100-260 degreesC) and characterizes the sulfide fluorite-sericite association in the Correas deposit. The late fluid in the Santa Barbara deposit has lower salinity (0-3 wt.% NaCl eq.) and characterizes the late-barren-quartz, muscovite and kaolinite veins. Oxygen isotope thermometry coupled with fluid inclusion data suggest hydrothermal activity at 240-450 degreesC, and 1,0-2.6 kbar fluid pressure at Correas and Oriente Novo. The hydrogen isotope composition of breccia-greisen, stockwork, and vein fluids (delta(18)O quartz from 9.9parts per thousand to 10.9parts per thousand, deltaDH(2)O from 4.13parts per thousand to 6.95parts per thousand) is consistent with a fluid that was in equilibrium with granite at temperatures from 450 to 240 degreesC. In the Santa Barbara deposit, the inferred temperatures for quartz-pods and bed-like greisens are much higher (570 and 500 degreesC, respectively), and that for the cassiterite-quartz-veins is 415 degreesC. The oxygen and hydrogen isotope composition of greisen and quartz-pods fluids (delta(18)O(qtz-H2O)=5.5-6.1parts per thousand) indicate that the fluid equilibrated with the albite granite, consistent with a magmatic origin. The values for mica (delta(18)O(mica-H2O)=33-9.8parts per thousand) suggest mixing with meteoric water. Late muscovite veins (delta(18)O(qtz-H2O)=-6.4parts per thousand) and late quartz (delta(18)O(mica-H2O)=-3.8parts per thousand) indicate involvement of a meteoric fluid. Overall, the stable isotope and fluid inclusion data imply three fluid types: (1) an early orthomagmatic fluid, which equilibrated with granite; (2) a mixed orthomagmatic-meteoric fluid; and (3) a late hydrothermal meteoric fluid. The first two were responsible for cassiterite, wolframite, and minor coluChange in the redox conditions related to mixing-of magmatic and meteoric fluids favored important sulfide mineralization in the Correas deposit. (C) 2004 Elsevier B.V. All rights reserved.

Non-Linear Dielectric Properties of PLMN-PT Relaxor Ferroelectrics

Recent investigations on the non-linear (NL) dielectric properties of relaxor ferroelectrics systems, not only as ceramic bodies, but also, in thin films, have showed a significant technological and scientific interest. The most common practical applications of relaxors include multilayer capacitors and actuators. In this work, non-linear dielectric properties of hot-pressed (1-x)[Pb1 -(3/2) yLayMg1/3Nb2/3O3]-xPbTiO3 (PLMN-PT) ferroelectric ceramics were investigated. The NL properties were obtained by using the measurements of the dielectric permittivity of the material as a function of the AC electric field with variable amplitude in the frequency and temperature range of 100 Hz-1 MHz and 50-450 K, respectively. An anomalous behavior of the non-linear dielectric response was observed when submitted to high electric fields levels. The obtained results were analyzed concerning one of the models for the dielectric response of relaxors ferroelectrics materials currently discussed in the literature.

Size limiting in Tsallis statistics

Power law scaling is observed in many physical, biological and socio-economical complex systems and is now considered an important property of these systems. In general, power law exists in the central part of the distribution. It has deviations from power law for very small and very large variable sizes. Tsallis, through non-extensive thermodynamics, explained power law distribution in many cases including deviation from the power law. In case of very large steps, the used the heuristic crossover approach. In the present we present an alternative model in which we consider that the entropy factor 9 decreases with variable size due to the softening of long range interactions or memory. We apply this model for distribution of citation index of scientists and examination scores and are able to explain the distribution for entire variable range. In the present model, we can have very sharp cut-off without interfering with power law in its central part as observed in many cases. (C) 2008 Elsevier B.V. All rights reserved.

Gender differences in predictors of health status in patients with COPD

Objective: To evaluate the health status (HS) of COPD patients and to identify the main predictors of HS in these patients according to gender. Methods: The study included 90 COPD patients (60 males and 30 females; mean age = 64 +/- 9 years) with a wide range of airway obstruction disorders (mean FEV(1) = 56 +/- 19% of predicted). The men were individually matched to the women by % of predicted FEV(1) (ratio: 2:1). The patients were assessed regarding body composition; six-minute walk distance; perception of dyspnea using the Modified Medical Research Council Dyspnea Scale; Saint George's Respiratory Questionnaire (SGRQ); Charlson comorbidity index; and the multidimensional Body mass index, airway Obstruction, Dyspnea, and Exercise capacity (BODE) index. Multiple linear regression analysis was performed to identify the predictors of HS by gender. Results: Impairment of HS was greater among the women than among the men for SGRQ total score and for all SGRQ domains (total: 51 +/- 18% vs. 38 19%; p = 0.002; symptoms: 61 +/- 22% vs. 42 +/- 21%; p < 0.001; activity: 62 +/- 18% vs. 49 +/- 21%; p = 0.004; and impact: 41 +/- 19% vs. 27 +/- 18%; p = 0.001). The multiple linear regression showed that age and perception of dyspnea correlated with SGRQ total score for both genders (males, r(2) = 0.42; females, r(2) = 0.70; p < 0.05). Conclusions: Our results showed an association between gender and HS in COPD patients. Age and dyspnea are determinants of HS in both genders.

Communication that values patient autonomy is associated with satisfaction with care: a systematic review

Question: Which communication factors used by clinicians during patient-clinician interactions are associated with satisfaction with care? Design: Systematic review with meta-analysis of studies investigating the association of verbal or nonverbal factors or interaction styles used by clinicians with patient satisfaction during an encounter between clinician and patient. Participants: Clinicians interacting with patients in primary care or rehabilitation settings. Results: Twenty-seven studies investigated 129 verbal, nonverbal, and interaction style factors. of these, 38 factors were consistently associated with satisfaction. Verbal factors concerning clinicians involving, facilitating, and supporting patients were associated with satisfaction with care. Most communication factors presented a fair correlation (r >= 0.21 but < 0.41) with satisfaction with care. Nonverbal factors such as time spent discussing prevention and time spent reading patient charts had a fair association with satisfaction with care (correlations range from 0.21 to 0.40). A moderate association was found between interaction styles such as caring (pooled r = 0.51, 95% CI 0.42 to 0.60) and satisfaction with care. Over half (58%) of the 129 identified factors never associated with satisfaction with care and the remainder associated inconsistently. Conclusion: The number of potential modifiable communication factors associated with satisfaction with care and the magnitude of their association partially support interventions to train clinicians in communication skills that value patient autonomy. [Oliveira VC, Refshauge KM, Ferreira ML, Pinto RZ, Beckenkamp PR, Negrao Filho RF, Ferreira PH (2012) Communication that values patient autonomy is associated with satisfaction with care: a systematic review. Journal of Physiotherapy 58: 215-229]

Self-Structuring of Lamellar Bridged Silsesquioxanes with Long Side Spacers

Diurea cross-linked bridged silsesquioxanes (BSs) C(10)C(11)C(10) derived from organosilane precursors, including decylene chains as side spacers and alkylene chains with variable length as central spacers (EtO)(3)Si- (CH(2))(10)-Y(CH(2))(n)-Y-(CH(2))(10)-Si(OEt)(3) (n = 7, 9-12; Y = urea group and Et = ethyl), have been synthesized through the combination of self-directed assembly and an acid-catalyzed sol gel route involving the addition of dimethylsulfoxide (DMSO) and a large excess of water. This new family of hybrids has enabled us to conclude that the length of the side spacers plays a unique role in the structuring of alkylene-based BSs, although their morphology remains unaffected. All the samples adopt a lamellar structure. While the alkylene chains are totally disordered in the case of the C(10)C(7)C(10) sample, a variable proportion of all-trans and gauche conformers exists in the materials with longer central spacers. The highest degree of structuring occurs for n = 9. The inclusion of decylene instead of propylene chains as side spacers leads to the formation of a stronger hydrogen-bonded urea-urea array as evidenced by two dimensional correlation Fourier transform infrared spectroscopic analysis. The emission spectra and emission quantum yields of the C(10)C(n)C(10) Cm materials are similar to those reported for diurea cross-linked alkylene-based BSs incorporating propylene chains as side spacers and prepared under different experimental conditions. The emission of the C(10)C(n)C(10) hybrids is ascribed to the overlap of two distinct components that occur within the urea cross-linkages and within the siliceous nanodomains. Time-resolved photoluminescence spectroscopy has provided evidence that the average distance between the siliceous domains and the urea cross-links is similar in the C(10)C(n)C(10) BSs and in oxyethylene-based hybrid analogues incorporating propylene chains as side spacers (diureasils), an indication that the longer side chains in the former materials adopt gauche conformations. It has also allowed us to demonstrate for the first time that the emission features of the urea-related component of the emission of alkylene-based BSs depend critically on the length of the side spacers.

Comparative structural analysis of neuromuscular junctions in mice at different ages

The authors studied the histochemical and ultrastructural modifications that occur in the neuromuscular junctions (NMJ) of fibularis longus muscles of mice with an age range of 3 to 21 months. Twenty-four male and female animals were killed at 3, 5, 14 and 21 months of age: 7 of them at 3 months, 4 of them at 5 month, 9 at 14 months and 4 at 21 months. The fibularis longus muscles were processed and their NMJ examined with the transmission electron microscope. The most relevant changes were associated with the degeneration and retraction of terminal axons, i.e., axons poor in synaptic vesicles with degenerated mitochondria, and exhibiting multivesicular bodies and vacuoles; exposed and widened junctional folds and cytoplasmic processes of Schwann cells located in the synaptic gutter. The presence of lysosomes or lipofuchsin in the juxtajunctional sarcoplasm was also noted. These observations suggest that the phenomena of retraction and budding occur in the NMJ with advancing age, with a predominance of events associated with degeneration, leading to profound changes in NMJ shape.

Immunological alterations in patients with primary tumors in central nervous system

Natural killer (NK) cells play an important role in immune surveillance against tumors. The present work aimed to study the cytotoxic activity of NK cells and T cell subsets in peripheral blood of 13 patients with primary tumors in central nervous system (CNS). As controls 29 healthy subjects with the age range equivalent to the patients were studied. The methods employed were: a) determination of cytotoxic activity of NK cells towards K562 target cells, evaluated by single cell-assay; b) enumeration of CD3+ lymphocytes and their CD4+ and CD8+ subsets defined by monoclonal antibodies; c) the identification of tumors were done by histologic and immunochemistry studies. The results indicated that adults and children with tumor in CNS display reduced percentage of total T cells, helper/inducer subset and low helper/suppressor ratio. The cytotoxic activity of NK cells was decreased in patients with CNS tumors due mainly to a decrease in the proportion of target-binding lymphocytes. These results suggest that cytotoxic activity of NK cells may be affected by the immunoregulatory disturbances observed in patients with primary tumors in CNS.

Progression of liver fibrosis in blood donors infected with hepatitis C virus

Background/Aims. Chronic hepatitis by HCV is progressive towards cirrhosis, with variable rate. We evaluated the rate of fibrosis progression (RFP), risk factors associated with advanced fibrosis (F3 and F4), and estimated the evolution time to cirrhosis. Methods. We transversely selected 142 blood donors infected only with HCV, with a known route of infection, submitted to liver biopsy at admission. RFP= ratio between stage of fibrosis (METAVIR)/estimated duration of infection in years. Non-parametric tests and logistic regression analysis, with significance level of 5% were used. Results. Median RFP was 0.086 U/year (0.05 - 0.142). Ten patients had F4 and 25 had F3. Median RFP values were significantly different (p=0.001) from one age group at contamination to the others and ALT and AST levels. There were no differences in the expected evolution to cirrhosis between intermediate fibrosers (F2) and the rapid fibrosers (F3 and F4). The independent variables associated with advanced fibrosis were ALT (OR 7.2) and GGT (OR 6.4) and age at inclusion (OR 1.12). Conclusion. This study suggests that RFP is extremely variable, it is exponential with age, and mainly influenced by host characteristics, especially age at contamination and possibly ethnical group. These asymptomatic patients had high percentage of fibrosis F2, F3 and F4.

Synthetic control charts with two-stage sampling for monitoring bivariate processes

In this article, we consider the synthetic control chart with two-stage sampling (SyTS chart) to control bivariate processes. During the first stage, one item of the sample is inspected and two correlated quality characteristics (x;y) are measured. If the Hotelling statistic T1 2 for these individual observations of (x;y) is lower than a specified value UCL 1 the sampling is interrupted. Otherwise, the sampling goes on to the second stage, where the remaining items are inspected and the Hotelling statistic T2 2 for the sample means of (x;y) is computed. When the statistic T2 2 is larger than a specified value UCL2, the sample is classified as nonconforming. According to the synthetic control chart procedure, the signal is based on the number of conforming samples between two neighbor nonconforming samples. The proposed chart detects process disturbances faster than the bivariate charts with variable sample size and it is from the practical viewpoint more convenient to administer.