Analysis of hybrid layer thickness, resin tag length and their correlation with microtensile bond strength using a total etch adhesive to intact dentin.

The objective of this study was to evaluate the use of a two-step total etch and rinse adhesive, the correlation between the hyybrid layer thickness (HL) and bond strength (BS), and between resin tag length (RT) and bond strength in the same teeth, and also to evaluate the fracture patterns of the tested specimens. Ten human molars were used for the restorative procedure and then sectioned in two halves (mesio-distally). The materials used were Adper Single Bond 2, 3M ESPE, Ultra etch gel, Ultradent and Filtek Z250, 3M ESPE. One half were utilized to measure the HL thickness and RT length through light microscopy analysis (400x), and the other half was subject to a microtensile test to measure the BS. The fractured surfaces were analyzed by scanning electron microscopy and fracture patterns classified. The Pearson correlation test was applied (p = 0.05). The results of the analyses of each specimen then were correlated: mean HL thickness = 4.39 (0.48) microm, mean length of RT = 9.94 (1.69) microm, mean BS = 23.98 (10.24) MPa. A statistically significant correlation between HL thickness and bond strength was found (r = 0.93). The two step etch and rinse adhesive system, showed a strong correlation between HL thickness and bond strength. The most common fractures were adhesive, followed by cohesive in resin.

Influence of acid-etching and ceramic primers on the repair of a glass ceramic

The objective of this study was to evaluate the influence of different primers on the microtensile bond strength (μT BS) between a feldspathic ceramic and two composites. Forty blocks (6.0 × 6.0 × 5.0 mm 3) were prepared from Vita Mark II . After polishing, they were randomly divided into 10 groups according to the surface treatment: Group 1, hydrofluoric acid 10% (HF) + silane; Group 2, CoJet + silane; Group 3, HF + Metal/Zirconia Primer; Group 4, HF + Clearfil Primer; Group 5, HF + Alloy Primer; Group 6, HF + V-Primer; Group 7, Metal/Zirconia Primer; Group 8, Clearfil Primer; Group 9, Alloy Primer; Group 10, V-Primer. After each surface treatment, an adhesive was applied and one of two composite resins was incrementally built up. The sticks obtained from each block (bonded area: 1.0 mm2 ± 0.2 mm) were stored in distilled water at 37°C for 30 days and submitted to thermocycling (7,000 cycles; 5°C/55°C ± 1°C). The μT BS test was carried out using a universal testing machine (1.0 mm/min). Data were analyzed using ANOVA and a Tukey test (α = 0.05). The surface treatments significantly affected the results (P < 0.05); no difference was observed between the composites (P > 0.05). The bond strength means (MPa) were as follows: Group 1a = 29.6; Group 1b = 33.7; Group 2a = 28.9; Group 2b = 27.1; Group 3a = 13.8; Group 3b = 14.9; Group 4a = 18.6; Group 4b = 19.4; Group 5a = 15.3; Group 5b = 16.5; Group 6a = 11; Group 6b = 18; Groups 7a to 10b = 0. While the use of primers alone was not sufficient for adequate bond strengths to feldspathic ceramic, HF etching followed by any silane delivered higher bond strength.

Influence of radiopacifying agents on the solubility, pH and antimicrobial activity of Portland cement

The aim of this study was to evaluate the interference of the radiopacifiers bismuth oxide (BO), bismuth carbonate (BC), bismuth subnitrate (BS), and zirconiun oxide (ZO) on the solubility, alkalinity and antimicrobial properties of white Portland cement (WPC). The substances were incorporated to PC, at a ratio of 1:4 (v/v) and subjected to a solubility test. To evaluate the pH, the cements were inserted into retrograde cavities prepared in simulated acrylic teeth and immediately immersed in deionized water. The pH of the solution was measured at 3, 24, 72 and 168 h. The antimicrobial activity was evaluated by a radial diffusion method against the microorganisms S. aureus (ATCC 25923), P. aeruginosa (ATCC 27853), E. faecalis (ATCC 29212) and C. albicans (ATCC 10231). The zone of microbial growth inhibition was measured after 24 h. The addition of BS and BC increased the solubility of the cement. The pH values demonstrated that all materials produced alkaline levels. At 3 h, BS showed lower pH than WPC (p<0.05). At 168 h, all materials showed similar pHs (p>0.05). The materials did not present antimicrobial activity for S. aureus, P. aeruginosas and E. faecalis (p>0.05). With regards to C. albicans, all materials formed an inhibition zone, mainly the mixture of WPC with ZO (p<0.05). The type of radiopacifier incorporated into WPC interfered with its physical and antimicrobial properties. ZO was found to be a viable radiopacifier that can be used with WPC.

Histomorphometrical and molecular evaluation of endosseous dental implants sites in humans: Correlation with clinical and radiographic aspects

Objective: To evaluate the correlations between clinical-radiographical aspects and histomorphometric-molecular parameters of endosseous dental implant sites in humans. Material and methods: The study sample consisted of bone implant sites from the jawbones of 32 volunteers, which were classified according to two different systems: (1) based only on periapical and panoramic images (PP); (2) as proposed by Lekholm & Zarb (L&Z). Bone biopsies were removed using trephine during the first drilling for implant placement. Samples were stained with haematoxylin-eosin (HE), and histomorphometric analysis was performed to obtain the following parameters: trabecular thickness (Tb.Th), trabecular number, bone volume density (BV/TV), bone specific surface (BS/BV), bone surface density and trabecular separation (Tb.Sp). In addition, immunohistochemistry analysis was performed on bone tissue samples for the proteins, Receptor activator of nuclear factor kappa-B (RANK), RANK ligand (RANKL), osteoprotegerin (OPG) and Osteocalcin (OC). Also, the determination of the relative levels of gene expression was performed using Reverse transcription-real-time Polymerase Chain Reaction (RT-PCR). Results: PP and L&Z classification systems revealed a moderate correlation with BV/TV, BS/BV, Tb.Th and Tb.Sp. L&Z's system identified differences among bone types when BV/TV, BS/BV, Tb.Th and Tb.Sp were compared. A weak correlation between PP/L&Z classifications and the expression of bone metabolism regulators (RANK, RANKL, OPG e OC) was found. The analysis of mRNA expression showed no difference between the bone types evaluated. Conclusions: Our results suggest that PP and L&Z subjective bone-type classification systems are related to histomorphometric aspects. These data may contribute to the validation of these classifications. Bone remodelling regulatory molecules do not seem to influence morphological aspects of the jawbone © 2011 John Wiley & Sons A/S.

Genotype effect on carcass and meat quality of lambs finished in irrigated pastures in the semiarid Northeastern Brazil

The aim of this study was to compare four genetic groups of sheep on the carcass and meat quality traits. Thirty-three contemporary and unrelated male lambs, all of single birth were used in the experiment, being thirteen from the Santa Inês (SI) breed, seven from the Brazilian Somali breed (BS), six from the Morada Nova (MN) breed and seven from the ½ Dorper - ½ Morada Nova (F1) crossbreed. The genotypes SI, BS and F1 presented similar performances in relation to hot and cold carcass weights, which values were 10.76±0.53kg and 10.46±0.52kg for SI, 9.20±0.73kg and 8.99±0.71kg for BS, and 9.35±0.73kg and 9.13±0.71kg for F1, respectively. The BS had a better hot carcass yield (47.10±0.88%) and cold carcass yield (46.00±0.87%). Better carcass conformation was observed in SI and F1 (2.73±0.12 and 2.50±0.17, respectively) while the BS presented a better finishing (3.29±0.20). The average for the rib eye area (REA) was 9.94±0.49cm², 8.66±0.67cm², 7.18±0.72cm² and 9.8±0.67cm², and for the carcass compactness index (CCI) it was 0.17±0.01kg/cm, 0.17±0.01kg/cm, 0.11±0.01kg/cm and 0.16±0,01kg/cm, for SI, SB, MN and F1, respectively. There were no significant differences between SI, BS and F1 regarding REA and CCI. Although, in general, the MN presented a relatively lower performance than the other genotypes, this breed had similar carcass yields and fat thickness when compared to SI and F1 and similar conformation and REA in comparison to the BS. Regarding meat quality, no differences were observed between genotypes, except for redness and cooking losses. It is concluded that no one group had a higher or lower performance in all traits analyzed. Moreover, for the management conditions employed in this study, there was evidence of greater specialization in meat production for genotypes SI, BS and F1 when compared to MN, although there are no substantial differences between the four groups regarding meat quality.

The seasonal and ovarian status effects on in vitro production of domestic cat embryos between Equator and Tropic of Capricorn

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Continuous Electrical Current and Zinc Sulphate Administered by Transdermal Iontophoresis Improves Skin Healing in Diabetic Rats Induced by Alloxan: Morphological and Ultrastructural Analysis

Purpose. Evaluated the effects of continuous electrical current (CEC) or zinc administrated by transdermal iontophoresis (Zn+TDI). Methods. 120 male Wistar rats were submitted to an incision surgery at the anterior region of abdomen and distributed into 6 experimental groups with 40 animals: 3 diabetic groups and 3 normal groups, untreated and treated with CEC alone or with Zn+TDI. Each group was further divided into 4 subgroups with 10 rats each to be evaluated on the 4th, 7th, 14th, and 21st day after surgery. In each period, clinical and laboratory parameters from the animals were analyzed. Results. The analysis by optical and scanning electron microscopy showed a delay in the phases of wound healing in diabetic rats without treatment in all periods of the experiment; breaking strength (BS) was significantly reduced in skin scars of untreated diabetic rats when compared to other groups. In contrast, BS in skin scars of nondiabetic groups and diabetic rats treated with Zn+TDI showed significant increase in those, besides not presenting delayed healing. Conclusion. Electrical stimulation of surgical wounds used alone or in association with zinc by TDI is able to consistently improve the morphological and ultrastructural changes observed in the healing of diabetic animals.

Treatment with tacrolimus enhances alveolar bone formation and decreases osteoclast number in the maxillae: A histomorphometric and ultrastructural study in rats

Recent studies have suggested that tacrolimus monotherapy is a beneficial therapeutic alternative for the normalization of cyclosporin- induced bone loss in animal models and humans. The mechanism accounting for this action is unclear at present. In the present study, we attempted to determine the effect of tacrolimus monotherapy on alveolar bone using histological, histomorphometrical and transmission electron microscopy (TEM).Groups of rats (n= 10 each) were treated with either tacrolimus (1mg/ kg/ day, s.c.) or drug vehicle for 60 days. Fragments containing maxillary molars were processed for light microscopy to investigate the alveolar bone volume, trabecular separation, number of osteoclasts and osteoblasts, and transmission electron microscopy to investigate their ultrastructural basic phenotype.Treatment with tacrolimus monotherapy during 60 days may induce increases in alveolar bone volume (BV/ TV,%; P < 0.05) and a non- significant decrease in trabecular separation (Tb. Sp, mm; P > 0.05), represented by a decrease in osteoclast number (N. Oc/ BS; P < 0.05) and maintenance of osteoblast number (N. Ob/ BS; P > 0.05). Osteoblasts were often observed as a continuous layer of active cells on the bone surface. Osteoclasts appeared to be detached from the resorbed bone surface, which was often filled by active osteoblasts and collagen- rich matrix. Moreover, osteoclasts in the treated group were frequently observed as inactive cells (without ruffled border, clear zone and detached from the bone surface).Within the limits of the present study, we conclude that tacrolimus leads to an increase in alveolar bone formation, which probably exerts action on osteoclasts. Tacrolimus could, therefore, play a crucial role in the control of both early osteoclast differentiations from precursors, as well as in functional activation.

Variação inter-sexual na frequência de cromossomos Bs em Corydoras aeneus (Siluriformes: Callichthyidae)

The genus Corydoras, the highest among the Siluriformes, Callichthyidae is owned by the family, consisting of 177 valid species and widely distributed in cis-Andean portion of South America How striking feature has two longitudinal series of dermal plates covering almost the entire body. Cytogenetic studies in Callichthyidae show many chromosomal rearrangements, including events of polyploidy in their evolutionary history, particularly the genus Corydoras, in which the variation is the diploid number of 2n = 40 to 2n = 134 chromosomes. The absence of information on the frequency of chromosomes in the group Bs motivated this work with the species Corydoras aeneus. A population from the Tietê River basin in Ribeirão Claro (subbasin Corumbataí - Rio Claro, SP) was sampled a total of 20 subjects (10 males and 10 females) and 30 metaphases per individual were analyzed cytogenetically. Were carried out by impregnation techniques silver (Ag-NOR). The observed modal diploid number was 2n = 60 (26m +26 sm +8 st), with the variable occurrence of 1 or 2 Bs chromosomes in males and a B chromosome in females, both acrocentric. Regarding the variation in the frequency of chromosome Bs, the occurrence of two B chromosomes is directly linked to males, because there were no female sampled with the occurrence of two chromosomes Bs The low frequency of Bs in females suggests that this event can be sporadic this sex, different from males in which this appears to be set supernumerary chromosome showing a higher frequency of 2 Bs than the actual modal number of 2n = 60. Further studies will be performed to understand the dynamics of the B chromosome in the population

Assessment of fungi in soils of sugarcane crops and their potential for production of biomass-degrading enzymes

Soil management practices are konwn to affect the biomass and enzyme activities of microbial soil communities. To assess whether burning of sugarcane prior to harvesting affects the community of soilborne fungi, we collected soil simples in two sites: burned sugarcane culture prior harvesting (BS) and non-burned sugarcane culture (NBS). A total of 75 filamentous fungal isolates were recovered from soils in both sites. Trichoderma was the most prevalent genus in both sites, followed by Fusarium, Cunninghamella and Aspergillus. The Sorensen's index (0.60) suggested a slight difference in fungi associated with both areas, with high number of fungal isolates found on BB soil. The abundance of Trichoderma isolates in NBS soil was higher than BS soil; however, the abundance of Fusarium, Aspergillus and Cunninghamella was higher in the latter type of soil. In addition, fungi isolated from BS soil showed the highest production of xylanase and laccase in comparision with fungi isolated form NBS soil. Our results indicate that the different types of sugarcane harvesting apparently did not interfere with the diversity of fungal communnities as revealed by culture-dependent methods. In addition, our data indicates the potencial of fungi from soils of sugarcane crops to produce relevant enzymes related to biomass conversion.

Performance and parasite control of different genetic groups of lambs finished in irrigated pasture

The aim of this study was to compare the following four genetic groups of hair sheep: Santa Inês (SI), Morada Nova (MN), Brazilian Somali (BS), and the F1 1/2Dorper x 1/2Morada Nova crossbreed on traits related to growth and parasitic infection. Thirty-three male lambs of the same age and of simple birth, under the same pre-weaning management conditions were used in the experiment. After weaning the animals were housed in a completely randomized design in paddocks made of Panicum maximum cv. Tanzania. Along the course of the research, the performance of the four groups of sheep was observed to be negatively affected by gastrointestinal parasites, but there was a genotype effect to the average daily weight gain (ADWG), where the SI and F1 genotypes presented higher values. The effects of genotype, time and genotype x time interaction were significant in weight and corporal score (CS) measurements. The BS lambs had the highest CS values throughout the experiment despite not presenting greater weight gain when compared to the SI and F1 breeds. There were also significant effects of time and genotype x time interaction for packed cell volume (PCV) and FAMACHA© score (FAM) and only the time effect was significant in the total number of eggs per gram (EPG) and total plasma protein (TPP). The MN lambs showed higher PCV values and unlike the other groups, presented a FAMACHA© score below 3 and PCV above 23% even having a higher EPG tendency, especially in the initial phase, indicating a possible higher resilience to infection caused by gastrointestinal parasites.

Influence of thicknesses of smear layer on the transdentinal cytotoxicity and bond strength of a resin-modified glass-ionomer cement

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Bone morphogenetic proteins: promising molecules for bone healing, bioengineering, and regenerative medicine

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)