Degradation analysis of the SnO2 and ZnO-based varistors using electrostatic force microscopy

The degradation phenomena of ZnO and SnO2-based varistors were investigated for two different degradation methods: DC voltage at increased temperature and degradation with 8/20 μs pulsed currents (lightning type). Electrostatic force microscopy (EFM) was used to analyze the surface charge accumulated at grain-boundary regions before and after degradation. Before the degradation process, 85% of the barriers are active in the SnO2 system, while the ZnO system presents only 30% effective barriers. Both systems showed changes in the electrical behavior when degraded with pulses. In the case of the ZnO system, the behavior after pulse degradation was essentially ohmic due to the destruction of barriers (about 99% of the interfaces are conductive). After the degradation with 8/20 μs pulsed currents, the SnO2 system still presents nonohmic behavior with a significant decrease in the quantity of effective barriers (from 85% to 5%). However, when the degradation is accomplished with continuous current, the SnO2 system exhibits minimum variation, while the ZnO system degrades from 30% to 5%. This result indicates the existence of metastable defects of low concentration and/or low diffusion in the SnO2 system. High energy is necessary to degrade the barriers due to defect annihilation in the SnO2 system. © 2013 The American Ceramic Society.

The application of a surface response methodology in the solar/UV-induced degradation of dairy wastewater using immobilized ZnO as a semiconductor

An Advanced Oxidation Process (AOPs) was carried out in this study with the use of immobilized ZnO and solar/UV as an energy source to degrade dairy wastewater. The semibatch reactor system consisted of metal plate of 800 × 250 mm and a glass tank. The reaction time was of 3 h for 3 L of dairy wastewater. Experiments were performed based on a surface response methodology in order to optimize the photocatalytic process. Degradation was measured in percentage terms by total organic carbon (TOC). The entry variables were ZnO coating thickness and pH, using three levels of each variable. The optimized results showed a TOC degradation of 31.7%. Optimal parameters were metal-plate coating of 100 m of ZnO and pH of 8.0. Since solar/UV is a constant and free energy source in most tropical countries, this process tends to suggest an interesting contribution in dairy wastewater treatment, especially as a pretreatment and the optimal conditions to guarantee a better efficiency of the process. © 2013 Gisella R. Lamas Samanamud et al.

Caracterização de propriedades de vidros polarizados do sistema P2O5 – B2O3 – CaO – TiO2

Pós-graduação em Ciência dos Materiais - FEIS

Vitrocerâmicas de alta resistência mecânica obtidas a partir da cristalização do sistema SiO2-Al2O3-MgO-Li2O com adição de ZrO2 e B2O3

Pós-graduação em Engenharia Mecânica - FEG

Efeito da pressão em filmes finos de ZnO:Al por RF Magnetron sputtering reativo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo do potencial de associações de ZnO com os produtos naturais ácido cafeico e ferúlico como filtros solares híbridos: [recurso eletrônico]

In this work were studied associations of ZnO with the natural products caffeic and feluric acids. Two preparation methods were used, that is, the sol-gel and a reflux procedure. In the sol-gel method, ZnO is produced by the basics hydrolysis of precursors in the presence of the organic filters (caffeic and feluric acids), which results in 30 nm (or less) ZnO particles with the organic filters (in dissociated form) bonded to the surface of ZnO. In the reflux method, a dispersion of ZnO in a water/ethanol mixture was kept under reflux (50oC/4h) in the presence of the organic acids. The ZnO particles used in the reflux method have a higher diameter than sol-gel ZnO particles, but the prepared associated product ZnO/Organic acids were similar. Despite of the difference in relation to crystallinity between the products, the preparation methods resulted in analogous associations with respect to the interaction of the organic filters with the ZnO surface. The caffeic/ZnO associations presented low photostability, which lead to the degradation of the organic filter. The other associations (feluric acid/ZnO) presented satisfactory results. The FT-IR spectroscopy confirmed the formation of the association, and the nature of the bond formed compared with the Zn-O bond in Zn2+/Felutic acid complexes. The isolated organic and inorganic filters, along with the associations were analyzed by diffuse reflectance spectroscopy and Uv-vis spectroscopy. The absorption edges and the critical wavelengths were analyzed and the effects of Zn-O bonds in feluric acid/ZnO associations described as a function of the relative position of the π/π* system of the organic filter. Finally the performance of the hybrid filters were investigated in terms of the absorption of UVA and UVB radiations, with the UVA/UVB ratio, an efficiency parameter largely used in the description of solar filters, sunscreen and suncare products

Structural and optical properties of Er3+ doped SiO2-Al2O3-GeO2 compounds prepared by a simple route

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)