Gerenciamento na construção civil - planejamento e controle: estudo de caso no planejamento físico de um empreendimento imobiliário

Given the high competitiveness in the construction industry, businesses became necessary in a management which reduce costs and delivery times, and is fundamental to running a compatible planning with the magnitude of each work order is the same make feasible the executor. When it comes to planning, one is including both the physical planning of the work, time and duration of the events, as well as the preparation of the cost thereof. There are numerous ways to run the management of works, then it is necessary, in most cases, the planning experience, in previous works, the engineer in charge, because with it he should know what strategy to take the work skirt as planned and designed. For a complete and efficient management, an initial study hard to prepare the physical and financial planning it is necessary, in order to make it real and consistent throughout the execution of the work. It is necessary also a hard monitoring of both the physical and the financial schedule in order to what was initially planned to be completed as close as possible. This paper shows a case study which uses some ways to the management be held with the course of planning, medium and short term, as well as the preparation of the initial budget of the work. Will also be presented as is performed physical planning of a real estate work

Maximizing the utility of bio-based diisocyanate and chain extenders in crystalline segmented thermoplastic polyester urethanes: effect of polymerization protocol

High molecular weight semi crystalline thermoplastic poly(ester urethanes), TPEUs, were prepared from a vegetable oil-based diisocyanate, aliphatic diol chain extenders and poly(ethylene adipate) macro diol using one-shot, pre-polymer and multi-stage polyaddition methods. The optimized polymerization reaction achieved ultra-high molecular weight TPEUs (>2 million as determined by GPC) in a short time, indicating a very high HPMDI diol reactivity. TPEUs with very well controlled hard segment (HS) and soft segment (SS) blocks were prepared and characterized with DSC, TGA, tensile analysis, and WAXD in order to reveal structure property relationships. A confinement effect that imparts elastomeric properties to otherwise thermoplastic TPEUs was revealed. The confinement extent was found to vary predictably with structure indicating that one can custom engineer tougher polyurethane elastomers by "tuning" soft segment crystallinity with suitable HS block structure. Generally, the HPMDI-based TPEUs exhibited thermal stability and mechanical properties comparable to entirely petroleum-based TPEUs. (C) 2014 Elsevier Ltd. All rights reserved.

Aplicação de princípios de ergonomia no atendimento odontológico

The dentist has been suggested as a professional vulnerable to labor risks mainly related to working posture. This study examined the application of ergonomics principles during the dental attendances made by university student of the last period of the Araçatuba Dental University. Twenty-four attendants were photographed and the images were digitally analyzed for the verification of 10 requirements that determine a healthy labor posture, defined by the project ISO Standard / TC 106/SC 6 N 411. It was observed that 50% of items from the check list obtained higher percentages of negative replies. The students had greater difficulties as to the correct position of the angle between the upper and lower leg when sitting, the ideal adjustment of the light focus reflector in the field of work and the patient positioning. It was concluded that the dental attendances were held without compliance with the ergonomic requirements. The greatest difficulties regarding the work posture were the sitting posture, the light beam and the patient positioning. Students need better guidance about ergonomic principles and requirements, which should occur at any time of life, but earliest they are installed, greater the benefits, assimilation and incorporation of adequate working postures will be. We need a reform that addresses all sectors of the dental system, so that learning and application of ergonomics in dentistry become effective, efficient and effective.

O engenheiro como construtor e reconstrutor no mundo

The formation of an engineer in each one of the several categories of this field must initially be related with their holistic training. If it they are working with teaching, this relation becomes even greater, because the professors need to teach and educate their students making them use these teachings in order to improve the society and the environment as a whole. The engineer must be engaged with the social problems in a context composed by human being and society, especially the contributions given to the mentioned society. According to Ferraz (198 MN3), "the engineering function is to design social institutions, rebuild them and ensure that the existing ones are operating". According to the same author, this action is gradual and must go step by step, always being concerned with social values, by comparing the achieved results and the ones that were expected.

Prática de atividade física em estudantes das áreas de saúde e não saúde de uma universidade do interior de São Paulo

The world’s population is having more and more difficulties in performing their daily activities and leisure, becoming, this way, more sedentary. Sedentary lifestyle can be considered as a reduction or as a lack of physical activity, less than the minimum volume suggested by the World Health Organization (WHO). Physical activity changes the behavior and some environmental acts. This study aimed to identify the NAF of students in the area of Physical Education and Healt Nursing and compare it with identified students’ levels non-health areas, being Production Engineer and Pedagogy. Aimed to correlate the found volume of 15 participants, with the state of cardio respiratory fitness (VO2max). The study included 125 students of both sexes from a university located in São Paulo state country. We conducted a cross-sectional study from August to October of 2012. For the initial test of the volume of physical activity we used the International Physical Activity Questionnaire (IPAQ) long version. In order of assessing cardio respiratory fitness, the Katch and McArdle seat test (1981) was used. Data were analyzed according to Physical Activity Level (PAL) presented by the university students in sessions 1, 2, 3, 4 of the IPAQ, and 15 students’ results were correlated with VO2max test. From these results we can say that: IPAQ session 1 showed that students in the health area are statistically superior to the non-health students area to the high-active classification. In session 2 the results were significant and superior to the health area and very active in sedentary classification. The session 3 results were very similar to session 1, showing that the health area as high-active with statistics differences. In session 4 we can see very significant results for health area in high-active areas and irregular actives. A total of 4 sessions found significant results for very active and sedentary. When was the attempt of association between levels 15 participants found the IPAQ long version and test bank VO2max, the results showed no significant association. The results of this study show a need for policies to encourage physical activity in the University environment, emphasizing a greater need for students who do not work in healthcare.

Matemática e estatística aplicadas a gestão da qualidadade nos cursos de Engenharia de Produção no Brasil: um contraponto entre a formação e o mercado de trabalho

Pós-graduação em Educação Matemática - IGCE

Impactos causados por vibrações mecânicas em chapas de alumínio no processo de laminação a frio

This paper purpose is to analyze one of the main problems faced by cold rolling industry of the current time, the mechanical vibration. Factors such as strips with high velocity in order to increase the productivity and thickness becoming thinner and thinner cause the vibrations to be present at all times during rolling. These market requirements also drive the industry for technology development and thus bring the challenges that the operation of a new modern equipment and more powerful. The initial purpose is to analyze the forces that cause vibration in a rolling mill type four high with two stands, where is desirable to identify the origins of these vibrational forces to make possible dismiss them or at least control its intensity, in order to prevent damage in the rolling mill and ensure product quality to the customer. For it, will be used instruments to record and store the vibrations that occur during the lamination process. With this data will be able to analyze the characteristics of the vibrations and act at your elimination. At the end of the work is expected to demonstrate how important the critical view of the engineer in the analysis of graphics combined with the calculations of the natural vibration frequency and engagement of key parts of the laminator. With these two tools at hand, will be possible to increase the productivity of the rolling mill and act preventively in maintenance, thereby reducing your downtime and increasing its performance and efficiency