The changes on microstructure and electrical properties of Bi:2223/Ag composite as a function of the granulation and the content of the added silver powder

The Bi-Sr-Ca-Cu-O system has been one of the most studied superconducting ceramic materials for industry applications. The most of the studies with this aim are on silver/ceramic composites, due to the benefits and great compatibility of this metal with the oxide. In this paper we describe a systematic and comparative study on Ag/BSCCO composite, made by the citrate route, in which the ceramic pellets are sintered in the presence of silver powder using several proportions and having several granulations. It was observed that the introduction of fine (0.5 and 2 μm) silver powder in the proportions of 5 wt. % always implies in a better critical current density compared to the no silver pellet. According to the results, the silver powder in excess of 5 wt.% may not promote best electrical properties, depending on the size of the silver particles.

Analysis of the influence of baffles and shields on the cooling of a digital transmission equipment

In this work design criteria for cooling of electronic systems used in a digital transmission equipment are considered. An experimental study using a simulated electronic equipment in which vertically oriented circuit boards are aligned to form vertical channels is carried out. Resistors are used to simulate actual components. The temperature of several components in the printed circuit boards are measured and the influence of the baffles and shields on the cooling effect are discussed. It was observed that the use of the baffles reduce the temperature levels and, the use of shields, although protecting the components from magnetic effects, cause an increase in the temperature levels.

Evaluation of maturity levels in the management of product development: case studies in the capital goods industry

In recent approaches to the management of product development process (PDP), maturity levels have attracted the attention of practitioners and researchers. The CMMI model contributes to evaluate the maturity levels and improvement of the product development process management. This paper, based on CMMI model, analyzes the practices adopted in two companies of the capital goods industry, which develop and manufacture equipment upon request. It was observed that on account of market conditioning factors and different practices adapted to PDP management, these companies are at different maturity levels. One company is at the initial level of maturity while the other at the most advanced one. It was also noted that the application of CMMI model can provide improvement to PDP management, as well as present guidelines to achieve higher maturity levels, adequate to companies' needs.

Comportamento do fator de potência de uma serra de fita vertical e de um picador em uma serraria

This work aims to present the electrical behavior of two mechanical processing equipment of wood, the saw vertical tape and the wood chipper. Their characteristics in real operating conditions and the electrical behavior of devices in terms of energy efficiency is shown through the study of individual power factor are presented in this study. It was observed that both devices operate unloaded for some intervals of time and this contributes to a low power factor. It is concluded that improved production planning and better preparation of the operators in the operations of sawing wood, in order to improve the power factor in sawmills is necessary.

Contribuições para a melhoria da gestão de resíduos de eletroeletrônicos no Brasil, no contexto da sustentabilidade ambiental

Pós-graduação em Engenharia de Produção - FEG

Análise de viabilidade de implementação de um centro inteligente de motores

Across the industry, regardless of the activity which is intended, the electricity distribution must meet the current and ever growing needs of the market, aiming at reliability and process efficiency. The energy must not only be available to ensure continuity of operation, but also to avoid the costs incurred due to deficiencies and failures. The tendency to migrate to intelligent systems is undeniable and this thesis will be analyzed the advantages that made this kind technology essential, focused on the analysis of the motor control center and as sturdy equipment fit to the concept of intelligent panels. The case study compares in a real scenario the acquisition of a system of low-voltage electrical panels comparing the cost to purchase the same set of panels made with and without the concept of intelligence

Proposta de metodologia para gestão de produção, visando redução no consumo de energia elétrica em uma unidade fabril do setor de bens de consumo

Actually the energy efficiency is making more space in the industry, due to the search for the sustainability, the electrical energy costs reduction, the goals achievement or the efficiency of production processes. In consumer goods industries, such a beverage industry, as the work is based, the productivity is directly related to the electrical energy consumption. The development of methodologies and/or routines, in addition to some tools which allow to align more efficiently these two aspects (production and consumption of electrical energy), in the viewpoint of the Energy Conservation, is very important. In this case, the study will show the Plant Modulation concepts, a production management methodology, based in some factors related to the productive process, installed equipment, production supplies and energy cost. The proposed methodology was implanted in a plant along 2015 and show the results, in face to confirm its efficiency. Finally, in this study, it was shown the capacity of Plant Modulation to positively impact in the energy efficiency inside a big industry

Estimativa do potencial de acréscimo da oferta de energia no setor sucroalcooleiro paulista a partir de cogeração e gaseificação do bagaço de cana-de-açúcar com utilização de ciclo combinado

This work evaluates the existing potential in the state of Sao Paulo for the generation of electrical energy using the sugar cane bagasse as fuel. As the bagasse is a by-product of the sugarcane and alcohol industry and it is produced in large scale in the country, mainly in the state of Sao Paulo, it is important to develop researches that aim the best utilization of this input. In order to determine its potential, at first, a study was conducted considering the utilization of the cogeneration, which is a common practice in the plants of the sector. However, it was concluded that the cogeneration could provide a higher quantity of energy if more modern technologies and more efficient processes were used. Another study to estimate the potential considered a system of gasification of the sugar cane bagasse integrated with the combined cycle (BIG/GTCC). It was concluded that this technology can provide a considerable increase in the electrical supply. In this work it was also developed an energetic study based on real data from a plant located in the state of Sao Paulo. A thermodynamic analysis was done in the existing equipment of the cogeneration section of the plant. And another analysis was done considering the implementation of the BIG/GTCC technology to the cogeneration system. Comparing the results of both settings, it was concluded that the utilization of the sugar cane bagasse integrated to a combined cycle increased considerably the efficiency in the generation of electricity of the plant, increasing more than six times its production capacity of electrical energy

Freio eletrodinamométrico usando um inversor de frequência e um motor de indução trifásico

Considering that the Brazilian energy source is based on hydroelectric power plants, every moment that it does not rain enough, we are likely to suffer power outage. Making the rational use of energy not only is wise, but also important for financial issues. The industrial sector is of great importance to Brazilian economic context, because it is one that creates more wealth and jobs. It should be noted that it is one of the sectors that consume more electricity. One of the most used equipment in industry is the three phase induction motor, which ends up providing significant waste of energy. For that reasons, studying three phase induction motors is important. One of the ways to evaluate the parameter of the three phase induction motor is using a dynamometer mechanic or electric. This work aims at further studies (and development) of electrodynamometer brake, a type of electrical dynamometer, that is the only one with reversible use. This means, it is possible to measure both the torque and the power transmitted by the electric motors, by the direct method and the indirect. Besides it allows greater stability in the imposition of charges, due to its nature of being able to regenerate the energy imparted by the engines being tested