The spatial dynamics of native and introduced blowflies (Dipt., Calliphoridae)

The spatial dynamics of three blowfly species was investigated using a spatially extended model of density-dependent population growth and the results indicate an overall stabilizing effect. Introduction of diffusive dispersal induced a quantitative effect of damping variation in population size on the route to a one-fixed point equilibrium in the native species, Cochliomyia macellaria. On the other hand, diffusive dispersal caused qualitative shifts in the dynamics of two invading species, Chrysomya megacephala and Chrysomya putoria. In both species diffusive dispersal can produce a qualitative shift from a two-point limit cycle to a one fixed-point dynamics. Quantitatively, dispersal also has the effect of damping oscillations in population size in the invading species.

A lung computed tomographic assessment of positive end-expiratory pressure-induced lung overdistension

The aim of this study was to assess positive end-expiratory pressure (PEEP)-induced lung overdistension and alveolar recruitment in six patients with acute lung injury (ALI) using a computed tomographic (CT) scan method. Lung overdistension was first determined in six healthy volunteers in whom CT sections were obtained at FRC and at TLC with a positive airway pressure of 30 cm H2O. In patients, lung volumes were quantified by the analysis of the frequency distribution of CT numbers on the entire lung at zero end-expiratory pressure (ZEEP) and PEEP. In healthy volunteers at FRC, the distribution of the density histograms was monophasic with a peak at -791 ± 12 Hounsfield units (HU). The lowest CT number observed was -912 HU. At TLC, lung volume increased by 79 ± 35% and the peak CT number decreased to -886 ± 26 HU. More than 70% of the increase in lung volume was located below -900 HU, suggesting that this value can be considered as the threshold separating normal aeration from overdistension. In patients with ALI, at ZEEP the distribution of density histograms was either monophasic (n = 3) or biphasic (n = 3). The mean CT number was -319 ± 34 HU. At PEEP 13 ± 3 cm H2O, lung volume increased by 47 ± 19% whereas mean CT number decreased to -538 ± 171 HU. PEEP induced a mean alveolar recruitment of 320 ± 160 ml and a mean lung overdistension of 238 ± 320 ml. In conclusion, overdistended lung parenchyma of healthy volunteers is characterized by a CT number below -900 HU. This threshold can be used in patients with ALI for differentiating PEEP-induced alveolar recruitment from lung overdistension.

Sintering of cobalt and strontium doped lanthanum chromite obtained by combustion synthesis

Lanthanum chromite (LaCrO3) is one of the most adequate materials for use as interconnector in solid oxide fuel cell (SOFC) applications, due to its intrinsic properties, namely its good electrical conductivity and resistance to environment conditions in fuel cell operations. Due to difficulties in sintering, additives are usually added to help in the densification process. In this work, the influence of added cobalt and strontium, in the sintering of LaCrO3 obtained by combustion synthesis was studied. The starting materials were respectively nitrates of chromium, lanthanum, cobalt and strontium, and urea was used as fuel. The results show that by increasing the strontium and cobalt concentrations it is possible to reduce the temperature of sintering. Using both additives, the sintering processes took place in lesser times than normally used for this material, as well as greater values of density were attained.

Effect of green machining on distortion and surface finishing in advanced ceramic

An alternative for grinding of sintered ceramic is the machining on the green state of the ceramic, which presents easy cutting without the introduction of harmful defects to its mechanical resistance. However, after sintering there are invariably distortions caused by the heterogeneous distribution of density gradients, which are located in the most outlying portions of the compacted workpiece. In order to minimize these density gradients, this study examined the influence of different allowance values and their corresponding influence in distortion after sintering alumina specimens with 99.8 % purity by turning operation using cemented carbide tool. Besides distortion, other output variables were analyzed, such as tool wear, cutting force and surface roughness of green and sintered ceramics. Results showed a distortion reduction up to 81.4%. Green machining is beneficial for reducing surface roughness in both green and sintered states. Cutting tool wear has a direct influence on surface roughness and cutting force.

Use of algorithms for semi-automatic quantification of pulmonary fibrosis and emphysema

Obtaining a semi-automatic quantification of pathologies found in the lung, through images of high resolution computed tomography (HRCT), is of great importance to aid in medical diagnosis. Paraccocidioidomycosis (PCM) is a systemic disease that affects the lung and even after effective treatment leaves sequels such as pulmonary fibrosis and emphysema. It is very important to the area of tropical diseases that the lung injury be quantified more accurately. In this stud, we propose the development of algorithms in computational environment Matlab® able to objectively quantify lung diseases such as fibrosis and emphysema. The program consists in selecting the region of interest (ROI), and through the use of density masks and filters, obtaining the lesion area quantification in relation to the healthy area of the lung. The proposed method was tested on 15 exams of HRCT of patients with confirmed PCM. To prove the validity and effectiveness of the method, we used a virtual phantom, also developed in this research. © 2013 Springer-Verlag.

Biological aspects of Aphis gossypii Glöver, 1877 (Hemiptera: Aphididae) on colored lint cotton cultivars

This paper outlines the results of a study into the biological aspects of Aphis gossypii Glöver on colored cotton cultivars through the construction of life tables. In addition, we evaluate the influence of density of gossypol glands and trichomes of leaves on the biology of the aphid. Tests were conducted in a climate chamber at 25 ± 2°C, with relative humidity (RH) at 70 ± 10%, and a photophase of 12 hours, using the cultivars BRS Rubi, BRS Safira, and BRS Verde. Newly hatched nymphs were individually isolated in petri dishes containing leaf discs of cotton cultivars on a layer of water-agar (1%) of approximately 5 mm thick. An evaluation of the trichomes and gossypol gland densities of the cotton leaf plants was performed under a stereomicroscope, delimited to an area of 1 cm², and a count and identification of those on the surface was made. The feed substrates that were evaluated influenced the nymphal stage of A. gossypii. BRS Verde provided the shortest duration and BRS Safira was the longest during this phase. The cultivar BRS Verde, with the lowest density of trichomes, provided a large number of nymphs and led to a higher net reproductive rate (R0). Given these results, conclusions can be drawn that the colored cotton cultivars influence the duration of nymphal and adult stages of A. gossypii. The cultivar with a high density of trichomes on leaves (BRS Safira) adversely affects the fertility parameters of A. gossypii.

Comparison of changes in dental and bone radiographic densities in the presence of different soft-tissue simulators using pixel intensity and digital subtraction analyses

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Maximally genuine multipartite entangled mixed X-states of N-qubits

For every possible spectrum of 2(N)-dimensional density operators, we construct an N-qubit X-state of the same spectrum and maximal genuine multipartite (GM-) concurrence, hence characterizing a global unitary transformation that -constrained to output X-states-maximizes the GM-concurrence of an arbitrary input mixed state of N qubits. We also apply semidefinite programming methods to obtain N-qubit X-states with maximal GM-concurrence for a given purity and to provide an alternative proof of optimality of a recently proposed set of density matrices for the purpose, the so-called X-MEMS. Furthermore, we introduce a numerical strategy to tailor a quantum operation that converts between any two given density matrices using a relatively small number of Kraus operators. We apply our strategy to design short operator-sum representations for the transformation between any given N-qubit mixed state and a corresponding X-MEMS of the same purity.

Prevalence of ectoparasites and bacteriological diagnosis in Nile tilapia bred in net-tanks in the Corvo's river, Parana, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Synthesis, evolved gas analysis (EGA) during pyrolysis and spectroscopic study of light lanthanide nicotinate in solid state

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biologia do caranguejo-uçá, Ucides cordatus (Crustacea: Decapoda: Brachyura), na Baía da Babitonga, Santa Catarina, Brasil

O objetivo deste estudo é caracterizar pela primeira vez alguns aspectos da reprodução do caranguejo-uçá em manguezais da Baía da Babitonga (Santa Catarina). Além disso, a densidade e o tamanho do estoque deste recurso pesqueiro foram também estimados. Os exemplares foram coletados mensalmente, de maio de 2002 a abril de 2003, em duas áreas distintas: Iperoba e Palmital; um total de 2265 espécimes (1623 machos e 642 fêmeas) foi analisado. Os machos com gônadas maturas foram registrados durante todo o ano, enquanto as fêmeas com gônadas maturas ocorreram em apenas cinco meses. As fêmeas ovígeras foram registradas apenas em dezembro e janeiro. O etograma do fenômeno de migração reprodutiva (andada) esteve em concordância com a maior atividade de caranguejos associada às luas cheias e novas, com maior intensidade em dezembro e janeiro, relacionados ao verão austral. A densidade total no Manguezal de Iperoba foi de 2,05 ± 0,97 ind./m², não diferindo significativamente daquela registrada para o Manguezal do Palmital (2,06 ± 1,08 ind./m²) (p < 0,05). A média global para a estimativa de densidade na Baia da Babitonga foi de 2,05 ± 1,00 ind./m², correspondendo a 1,42 ± 0,89 ind./m² com base nas galerias abertas e 0,64 ± 0,63 ind./m² para as galerias fechadas.

Estudo de competição inter e intraespecífica envolvendo Glycine max (L. ) Merril e Cyperus rotundus (L.), em condições de casa de vegetação

O presente experimento teve por objetivo estudar os efeitos da competição inter e intraespecífica envolvendo Glycine max (L.) Merril e Cyperus rotundus L. sobre as características das plantas e acúmulos de N, P, K, Ca e Mg pelas espécies envolvidas. Para tanto, estipulou-se um tratamento em que se desenvolveram três plantas de Glycine max e outro em que se desenvolveram 3 tubérculos de Cyperus rotundus por vaso. Para estudar os efeitos da competição intraespecífica, em dois outros tratamentos dobraram-se as populações por vaso. No estudo da competição interespecífica permitiu-se o desenvolvimento de três plantas de Glycine max e de três tubérculos de Cyperus rotundus num mesmo vaso. de uma maneira geral, pôde-se observar que principalmente devido às diferenças no hábito de crescimento das duas espécies, a expressão da competição inter e intraespecífica, em cada uma delas, assume aspectos distintos. No caso de Cyperus rotundus, o efeito do dobro da densidade pôde ser compensado, em parte, pela maior produção de manifestações epígeas e de tubérculos, aliados ao maior desenvolvimento dos tubérculos na menor densidade de plantio. No caso da competição interespecífica, os resultados sugerem um efeito decisivo do sombreamento de Leguminosae sobre o comportamento da Cyperaceae. Os padrões de efeitos da competição pelos nutrientes foi determinado também pelas diferenças no recrutamento dos elementos do solo pelas espécies envolvidas.

Consumo de Uroleucon ambrosiae (Thomas, 1878) (Hemiptera: Aphididae) por larvas de Chrysoperla externa (Hagen, 1861) (Neuroptera: Chrysopidae) em casa-de-vegetação

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Frações Nitrogenadas, Glicídicas e Amônia Liberada pela Cama de Frangos de Corte em Diferentes Densidades e Tempos de Confinamento

O presente trabalho foi conduzido com o objetivo de estudar a liberação de amônia pela cama de frangos de corte, bem como o teor de umidade e de compostos glicídicos (carboidratos redutores) e nitrogenados (nitrogênio total, nitrogênio solúvel total e nitrato) presentes na mesma, em função da densidade populacional, tempo de confinamento e sexo das aves. Realizou-se o experimento em delineamento inteiramente casualizado. A cama de frango foi submetida às densidades de 10; 14; 18 e 22 aves/m² de piso, para ambos os sexos, e analisada em três épocas diferentes (24, 38 e 42 dias de idade das aves), utilizando-se de esquema fatorial 4x2x3 (densidades x sexos x épocas). de modo geral, observou-se que o sexo não influenciou o comportamento das variáveis estudadas. O aumento da densidade e o avanço da época de amostragem induziram a aumentos da quantidade de amônia liberada, do teor de umidade e dos teores de nitrogênio total e de nitrogênio solúvel, bem como diminuição do teor de carboidratos redutores. Estes resultados sugerem a necessidade de um controle rigoroso da amônia no ar dos galpões, principalmente em densidades elevadas e no período final de criação.

Propriedades físicas dos lenhos juvenil e adulto de Pinus elliottii Engelm var. elliottii e de Eucalyptus grandis Hill ex Maiden

The juvenile wood presents great difference in its anatomical and physical properties in relation to the mature wood. That heterogeneity of the wood causes a series of upset for the processing industry. The present research had as objective the study of the physical properties of the juvenile and mature wood of Pinus elliottii Engelm var. elliottii, with 25 years of age and of Eucalyptus grandis Hill ex Maiden, with 30 years of age, coming from the Experimental Station of Itapetininga and State Forest of Santa Barbara, belonging to the Forest Institute of the state of São Paulo. From both species there were taken from radial boards, specimens with dimensions of 20x30x50 mm, for the determination of density, swelling and swelling coefficient of the juvenile and mature wood. The results of the species showed that the mature compared with the juvenile wood presented: (1) an increase in the values of the basic density, at 0% and at 12% of moisture content and of the volumetric, radial and tangential swelling at 12% moisture content and maximum coefficient of radial and tangential swelling; (2) a reduction in the values of longitudinal swelling at 12% and maximum and of the longitudinal swelling coefficient.