Análise do sistema de medição em uma linha produtiva de radar

In this work, we analyze a measurement system that will be implanted in a wheels production line, in order to use those wheels for buses and trucks. The measurement device has to be approved according to the MSA study, due to the fact that the mentioned industry is an automobilistic supplier, so that it has to be conform with the ISO/TS 16949 standards. We showed the MSA studies, as well as some concepts for the work understanding. The airlock wheels systematic production is also broached, that is to say, wheels that use airlock tyres, with a better attention given to the rim production, where the device must be implanted. We analyze and assess the data’s acceptance according to the guidelines showed in this study, along with this, improvement proposals are elaborated and their analysis is made, in order to check the obtained results. Finally, we survey the analyzed measurement system, and new studies are suggested, with the intention of improving it

Caracterização petrográfica e geoquímica das rochas encaixantes da mineralização de ouro do alvo lavra velha - Ibitiara (BA)

The Lavra Velha gold prospect is located in Ibitiara city, in the Espinhaço Setentrional physiographic domain, on the west edge of Chapada Diamantina – central part of Bahia. It is inserting on Gavião Block, a compartment of São Francisco Cráton (Almeida, 1977). The Lavra Velha gold dump is formed by an association of hydrothermal breccia lodged in acid and intermediate rocks, classifying in tonalite, granodiorite and diorite, with high alteration, cut off by a vein and venules system constituted by hydrothermal association composed by hematite, tourmaline, quarz and sericite, located in the north limit of Ibitiara granite. In the regional geological context the area is represented by Archaean rocks (Paramirim Complex) and Paleoproterozoic rocks (Ibitiara granitoid and Matinos Granite) constituted the basement, following by paleo to mesozoic pluton-vulcanic-sedimentary association of Rio dos Remédios Group, intruded by mafic rocks. It was used geochemistry and petrographic analysis compiling to field works data to characterize the rocks where the gold mineralization is inserting. Previously these rocks were classifying in volcanic rocks of Novo Horizonte Formation. Developing this monograph’s work the petrogenetic characteristics suggesting that these rocks called volcanic actually belong to Ibitiara granitoid as a portion more metamorphosed. The green schist is the predominant metamorphism in the area with low deformation, associated to high concentration of fluid circulating. The hydrothermal alteration is the process responsible for rocks modifications and strong sericitization generalize

Transportador de correia: componentes e cálculos básicos para seu dimensionamento

Increasingly, people searches for an efficient and economic way for transporting bulk materials. Transport through belts is now the most widely used mean for transporting bulk materials, used by companies from various sectors such as mining, quarrying, agribusiness, etc. There are many advantages of using a conveyor belt as compared to rail or by truck. Trucks needs a driver, have a high risk of accidents as well as a high cost for maintenance and as well as trains, after making the downloading of the material, return empty to the next load. The cost for the construction of a railway is very high, making it often impossible. The conveyor belt have a high cost of installation, but it works 24 hours a day, 365 days a year. The upper side of the belt is always loaded, the maintenance cost is average and the risk of accidents is low, causing it to be the ideal way to transport bulk materials. This monography aims to interest the reader about what is a conveyor belt, what are its main components and demonstrate the basic calculations for their sizing and selection of components. Throughout the work, scaled a belt conveyor for use in the mining sector, but the concepts demonstrated apply to the transport of any material

Uso de sistemas construídos de áreas alagadas (Constructed Wetland System - CWS) tipo ascendente/descendente, para tratamento de efluentes avícolas

Human development and population growth during the twentieth century increased the water demand, tripling its consumption between 1950 and 1990. As the water streams were polluted; and as water is the source of minerals and also regulates vital functions, it becomes the vehicle of transmission and consequently spreads many diseases. Probably, the industries are the major responsible for this pollution when they dump untreated effluents to water streams, saturating the already insufficient net of sanitation facilities polluting water and soil. An effective treatment has been established with low cost in Europe and the United States, through constructed systems on wetlands Constructed Wetland Systems - CWSs, gradually used in other countries in the last three decades. Lately, we observe a continuous growth in Brazilian poultry business, and poultry industry showed greatest dynamism in the country, following the global market. Pondering this information and the efficiency of such treatment, this work aimed to study prototypes, in a laboratory scale, simulating ascending and descending types of CWSs, vegetated with aquatic macrophytes Eichhornia crassipes and the uses of aggregates and soil, to treat industrial wastewater from slaughterhouses and aviary. We conducted the initial characterization of the effluent to have an idea of its constituents and to scale the system and the continuous flow. Furthermore, we characterized the soil to be used in this system. The collects are periodically made in the refrigeration industry FRICOCK FRIGORIFICAÇÃO AVICULTURA INDÚSTRIA E COMÉRCIO LTDA. for local treatment simulation. The effluent that was treated with 12 prototypes of CWSs are analyzed with some frequency. The results of these reviews were compared to the effluent coming from the industry... (Complete abstract click electronic access below)

Desenvolvimento de um protetor lateral em alumínio

In view of the need to develop a device for security and lateral protection, due to the Resolution 323/09 of CONTRAN, which requires the use of such equipment for most trucks and tow trucks, the objective of this work is to develop a project for an aluminum lateral protection device, according to the ABNT NBR 14.148 regulation, that, among many specifications, stipulates that the equipment must support a load of 5 kN and suffer a maximum deflection of 30mm, but does not say what material it should be made of. The reason for choosing aluminum is because of its low density, so as not to significantly increase the curb weight of the truck, which, consequently, reduces CO2 emissions and maintenance expenses. Additionally, this material presents a good resistance/weight ratio, high resistance to corrosion, excellent surface finish and it's fully recyclable; reason why it has been gaining the attention of many industry segments. For the realization of the project, profiles were chosen to make the assembly of the set, and then a finite elements analysis was performed in the HyperWorks software, to verify if the designed device would support the loads stipulated by the regulation. One details to note is that these simulation programs could show inaccuracies, because of the size and shape of the elements that compose the mesh, and for many other reasons, so it is necessary that, even with the results coming back satisfactory, actual physical tests are conducted to validate the proper functioning of the equipment, which was not done for this study

Parametrização de modelo para simulação de distribuição de combustíveis em um terminal

A great competition between companies happens nowadays, due to, among other factors, the globalized economic system, the growing consumer demand and the technological advances. This fact implies the need for fast and efficient tools in decision making. A validated simulation model is able to perform this task. Thus, it was parameterized a simulation model of a fuel distribution terminal. It is a complex system because of its great variability. The model´s data input were collected, however the model was not statistically validated, in other word, does not adequately represent the real system. A search was made for the possible causes of this fact: dividing the compartments of tanker trucks, data collection may have been insufficient, inefficient model for unloading of biofuels

Análise ambiental em um canteiro de obras

The building sector can cause the environmental degradation, by the natural resources consumption, machinery use and natural landscape modifying. The environmental management system (EMS) improves the environmental quality and makes the companies more competitive. So, this work developed an environmental management system in a building site focused on the solid waste and in the development of mitigation proposals for the most significant environmental impacts. To develop this work it was necessary to follow the building site activities; evaluate the solid waste management; identify the law requirements; identify the environmental aspects and impacts; evaluate the environmental impacts; and propose alternatives for mitigating the adverse environmental critical impacts. The main proposals are the reduction of the waste generation in the place that it’s generated; the reuse and correct final disposal of that wastes; the treatment and reuse of the effluent; and the supervising in the trucks and machineries avoiding the oil spilling and the air pollution

Simulação do tempo de descarga de caminhões graneleiros em uma estação de transbordo de carga em Porto Murtinho, MS

In the current decade, inter modal transport is widely discussed. In Brazil road transport is used in excess whereas there could be more focus and investment towards water transport. Water transport presents many benefits like being low cost and low maintenance. Sea and river ports today aren't capable of supporting Brazil's transport needs. Therefore, with this obstacle, this paper consists of an attempt of modeling and simulation of the process of unloading grain cargo from trucks, through simulation with ProModel software, to verify the necessity of installing more tumblers at the cargo unloading station in Porto Murtinho, MS

Fabricação de rodas: uma análise comparativa

In our country, the majority of freight and people by road happens municipal, state and federal. Thus, the heavy vehicles like buses and trucks are the main means of transporting people and cargo. This graduate work aims to study the process of manufacturing wheels for trucks, because we can see the lack of literature on the manufacturing process of wheels and also the importance of the processes used to manufacture wheels, such as lamination, stamping, puckering, machining, welding and painting

Proposta de arquitetura e protocolo para a geração automática de assinaturas de malwares

Given the exponential growth in the spread of the virus world wide web (Internet) and its increasing complexity, it is necessary to adopt more complex systems for the extraction of malware finger-prints (malware fingerprints - malicious software; is the name given to extracting unique information leading to identification of the virus, equivalent to humans, the fingerprint). The architecture and protocol proposed here aim to achieve more efficient fingerprints, using techniques that make a single fingerprint enough to compromise an entire group of viruses. This efficiency is given by the use of a hybrid approach of extracting fingerprints, taking into account the analysis of the code and the behavior of the sample, so called viruses. The main targets of this proposed system are Polymorphics and Metamorphics Malwares, given the difficulty in creating fingerprints that identify an entire family from these viruses. This difficulty is created by the use of techniques that have as their main objective compromise analysis by experts. The parameters chosen for the behavioral analysis are: File System; Records Windows; RAM Dump and API calls. As for the analysis of the code, the objective is to create, in binary virus, divisions in blocks, where it is possible to extract hashes. This technique considers the instruction there and its neighborhood, characterized as being accurate. In short, with this information is intended to predict and draw a profile of action of the virus and then create a fingerprint based on the degree of kinship between them (threshold), whose goal is to increase the ability to detect viruses that do not make part of the same family

Manual de procedimentos técnicos para manutenção preventiva em empilhadeiras na área de prestação de serviços

The service area is in full development in the world, and it is proven the benefits of outsourcing services to large companies, which deliver services and manufacturing experts can focus only on production of their products. In the case of cargo handling is no different, many factories hire specialized companies to reduce fixed costs and factory overhead. And with the intense competition in the market, service providers are increasingly seeking to reduce costs in order to offer services at competitive prices. So if we see a growing need to train its employees to perform services faster and with better quality. In this work, will be a handbook of technical procedures for preventive maintenance, as well as a catalog of parts required to perform the same for Toyota 8 Series forklifts. Will be developed also tools to control and carry out the preventive maintenance of these trucks, such as Check-list and a manual of tools needed for each procedure. The results show that service quality has improved considerably and the cost of wrong parts decreases more than 15%

Estudo da gestão de aterros sanitários através de consórcios públicos e públicos-privados

The growing population, purchasing power and changing the profile of Brazilian consumers are the facts to justify the increase in waste production in the country. According to the National Research Sanitation made by IBGE in 2000, Brazil produced 241,614 tons of waste per day, equivalent to approximately 90 million tons per year. This growth leads researchers to consider a better way to dump this material in order to mitigate the damage to population health and the environment. For this, one of the possible actions is the search for alternative disposal technological development, a possible solution being the construction of landfills. But many cities, especially those from regions of poor or agricultural base, do not always have sufficient resources and open spaces for the construction of a landfill as required by law. Fits like a context in which it operates as an alternative technology for inter-municipal consortia landfill and public-private partnerships in order to contribute to the sustainable development of cities. The law that regulates public consortia is the Federal Law 11.107 of April 2005, as the law that regulates and makes possible the Public-Private Partnership is the Federal Law 11.079 of 2004. Consortia are entities that bring together several municipalities, with or without the State and the Union to carry out joint actions that if were borne singly, not would achieve the same results or would lose a greater volume of resources, and would demand more time. The public-private partnership consist of one or more municipalities and a private company, selected by public tender, which becomes responsible for implementation, maintenance and operation of the landfill. This practice can performed on the model of concession, in which public administration is direct or indirect user, with or without installation and ... (Complete abstract click eletronic access below)

Recuperação da palha da cana-de-açúcar para a produção de energia elétrica e etanol celulósico

Pós-graduação em Engenharia Mecânica - FEIS

Detecção de Meloidogyne enterolobii em mudas de amoreira (Morus nigra L.)

Trade seedlings without certification contributed to spread pests and diseases which can cause a large damage to grown plants. In Itapetininga (SP), was seized by Agricultural Defense staff, seedlings of barbados cherry, guava and mulberry, sold in trucks, all of that had galls on roots, typical symptom caused by Meloidogyne spp. Specie identification was made by morphology of female perineal pattern and male head, as well as characterization of esterase enzyme phenotype. It was confirmed the presence of M. enterolobii in the samples analyzed. This is the first report of M. enterolobii in mulberry seedlings in the world.

Impacto do estresse no bem-estar dos animais e na qualidade da carcaça e da carne

Pós-graduação em Zootecnia - FCAV