Ações de prevenção de acidentes humanos em disciplinas e estágio de curso de fonoaudiologia: opiniões de discentes e docentes

Pós-graduação em Educação - FFC

Mulheres que tecem a vida: trabalho e gênero em tempos precarizados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

MAPAGEOLÓGICO-GEOTÉCNICO DA BACIA DO RIO BACANGA – SÃO LUÍS (MA)

Este trabalho apresenta as características do meio físico da Bacia do Rio Bacanga, localizada na cidade de São Luís (MA). Dentro da compartimentação geomorfológica regional, a área insere-se no Golfão Maranhense, sendo caracterizada por duas unidades de relevo: colinas dissecadas a partir dos tabuleiros e planícies flúvio-marinhas. Os estudos objetivaram a elaboração de um mapa geológico- geotécnico, fundamentado no método do detalhamento progressivo, sendo integradas as informações geológicas, geomorfológicas e de solos em uma base topográfica na escala de 1:20.000. Para esses estudos foi utilizada como ferramenta principal a fotointerpretação detalhada, associada ao controle de campo e ensaio in situ. No mapa resultante foram caracterizadas seis unidades geológico-geotécnicas: Unidade I – depósitos construídos; Unidade II – áreas planas de fundo de vales; Unidade III – terrenos associados à fácies arenosa da Formação Barreiras; Unidade IV – fácies areno-argilosa da Formação Barreiras; Unidade V – área de domínio da fácies areno-argilosa da Formação Barreiras; Unidade VI – domínio da Formação Itapecuru. Nas unidades foram identificados os processos geológicos e os problemas ambientais que compõem a dinâmica da bacia do Rio Bacanga. O mapa elaborado é uma das ferramentas indispensáveis para subsidiar o planejamento do uso e ocupação do solo. Palavras-chave: mapeamento geológico-geotécnico, relevo de tabuleiro, Rio Bacanga, São Luís (MA).

Nonlinear dynamics of within-host parasite competition

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Amoras e jabuticabas: raízes e frutos de uma Pedagogia Profunda para todos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Herivelto Brandino e a obra mensagem para marimba solo: discussão do processo composicional e performance

This article points out some elements required for comprehending the work mensagem for marimba solo (2011) by Herivelto Brandino in regard to its compositional process and performance. The text shows how various materials have been chosen for the confection of the work - mainly those related to the act of writing texts - and approaches the composer's queries about the non-necessity, and even the uselessness of composition, performance and artistic objects themselves. At the end we conclude that regardless such a supposed non-necessity of any musical object it is possible to construct a coherent piece based on similar paradoxes that, at first, served to make any compositional work useless.

livros infantis adequados para uma criança com deficiência visual: a experiência de bolsistas PIBID da FFC/UNESP/Marília

This article tells the experience of some scholarship holders of Subproject PIBID Pedagogy Literacy FFC, who have developed, between its activities: planning, analysis, confection and adequacy of books of infantile histories so that they can be read and better understood for a child with visual deficiency. The idea arose from the fact that the school in which the pupil is enrolled does not have in its collection such resources. The books followed the criteria of adequacy and present in the literature of specific preparation area and the results pointed to the schoolgirl showed interest and motivation to run the task to read the stories with the adjustments that are made.

Estudo do conteúdo de partículas inorgânicas, da contração de polimerização e da resistência à flexão de materiais restauradores estéticos diretos indicados para dentes posteriores

Recentemente, foram lançados no mercado odontológico novos materiais estéticos para restaurações diretas em dentes posteriores, aos quais são atribuídas propriedades mais adequadas para essa indicação. Entretanto, as informações disponíveis são ainda muito escassas, gerando dúvidas quanto à sua real eficácia, sobre quais as diferenças de suas composições e propriedades físicas e mecânicas em relação aos materiais até então disponíveis e se, de fato, apresentam melhor performance clínica. Em vista do exposto, nos propusemos a estudar contração de polimerização, resistência à flexão e concentração de partículas inorgânicas, por massa e volume, de sete resinas compostas (Alert, Ariston, Solitaire, Definite, Filtek P60, Z-100 e Tetric Ceram). A contração de polimerização foi medida nos materiais inseridos em um anel plástico, e o registro das alterações, durante a polimerização, foi feito por meio de instrumento eletrônico de medida linear, que registra as alterações dimensionais, com sensibilidade de 1 mm. A resistência à flexão foi medida na máquina de ensaios mecânicos MTS 810 e a confecção dos corpos-de-prova e dos dispositivos para o ensaio foi orientada pela norma ISO no 4049:1988. A determinação do conteúdo de partículas inorgânicas por massa foi feita através da pesagem de uma porção de resina composta polimerizada antes e após a eliminação da fase orgânica em forno, à temperatura de 700oC. O porcentual volumétrico de partículas inorgânicas foi calculado com base no Princípio de Arquimedes. Foi determinado o volume da resina composta polimerizada, antes e após a eliminação da fase orgânica, pela diferença da massa do material pesado ao ar e imerso em água. Os dados de conteúdo de partículas inorgânicas por massa e por volume, de contração de polimerização e resistência à flexão foram submetidos...(Resumo completo, clicar acesso eletrônico abaixo)

Comparison of the performance of natural latex membranes prepared with different procedures and PTFE membrane in guided bone regeneration (GBR) in rabbits

This work assessed the performance of membranes made of natural latex extracted from Hevea brasiliensis prepared with three different methods: polymerized immediately after collection without the use of ammonia (L1); polymerized after preservation in ammonia solution (L2); and polymerized after storage in ammonia, followed by Soxhlet technique for the extraction of substances (L3). Polytetrafluoroethylene (PTFE) membrane was used as control. Two 10-mm diameter bone defects were surgically made in the calvaria of thirty adult male New Zealand rabbits. Defects (total n = 60) were treated with guided bone regeneration (GBR) using L1, L2, L3 or PTFE membranes (n = 15 for each membrane). Ten animals were euthanized after 7, 20 and 60 days postoperatively so that five samples (n = 5) of each treatment were collected at each time, and bone regeneration was assessed microscopically. The microscopic analysis revealed defects filled with blood clot and new bone formation at the margins of the defect in all 7-day samples, while 20-day defects were mainly filled with fibrous connective tissue. After 60 days defects covered with L1 membranes showed a significantly larger bone formation area in comparison to the other groups (P < 0.05, ANOVA, Tukey). Additionally, bone tissue hypersensitization for L1 and PTFE membranes was also investigated in six additional rabbits. The animals were subjected to the same surgical procedure for the confection of one 10-mm diameter bone defect that was treated with L1 (n = 3) or PTFE (n = 3). Fifty-three days later, a second surgery was performed to make a second defect, which was treated with the same type of membrane used in the first surgery. Seven days later, the animals were euthanized and samples analyzed. No differences among L1 and PTFE samples collected from sensitized and non-sensitized animals were found (P > 0.05, Kruskal-Wallis). Therefore, the results demonstrated that latex membranes presented performance comparable to PTFE membranes, and that L1 membranes induced higher bone formation. L1 and PTFE membranes produced no hypersensitization in the bone tissue.

Efeitos fotocrômico e termocrômico em ormosils dopados com azobenzenos

The sol-gel process and the wide variety of alkoxides commercially available have facilitated the processing of various Organic-Inorganic Hybrid Materials. In general, the hybrids are excellents matrix to incorporate organic or inorganic dopants that presents photochromic, thermochromic, and halochromic effects and in some cases photorefractive effects. The GPTS-TEOS hybrid matrix when deposited in the form of film is very resistant, adherent, has excellent transparency in visible region and allows to be doped with various azo-dye and metal salts of unusual oxidation states. One of the main characteristics of the azo-dyes when immersed in some hybrid matrix , is the capacity to isomerizes through group Azo (-N = N-) would can be commutated between the Cis (Z) and Trans (E) configurations by means of light or heat. Our goal was through the sol-gel process to prepare hybrid films of GPTS-TEOS doped with azo-dyes Methyl Red and Disperse Red 1, and characterize them optically. The characterizations are performed using techniques of UV / Vis spectroscopy, to identify changes in the absorption band of azo-dyes in the presence of optical pumping, (photochromic effects), in function of temperature (thermochromic effect). These properties are of wide scientific and technological interest because they will contribute to the confection Smart Windows (windows sensible to light), temperature sensors monitored optically and also in the recording of amplitude and phase diffraction gratings

Reciclagem de poliestireno expandido: compósito com fibras de sisal para confecção de placas de circuito impresso

In this work polystyrene composites reinforced with recycled sisal fibers were processed, in order to apply in the manufacture of printed circuit boards. A thermoplastic matrix of recycled polystyrene was used, this material came from waste expanded polystyrene (EPS) used in appliance's packages. Composites were prepared with 15% and 25% of sisal fibers. To obtain the composites, wasted EPS and natural sisal fibers were chosen, to encourage recycling and reuse of household waste and also the use of renewable resources. The composites were analyzed by standard tensile and flexural test, in order to verify the mechanical properties of the material. The characterization of the composite was done by scanning electron microscopy (SEM) , thermogravimetry (TGA / DTG) , differential scanning calorimetry (DSC) and dielectric analysis . The analysis of the results showed that the percentage of fibers in the composite influences directly the thermal and mechanical properties. Plates with a lower percentage of fibers showed superior properties at a higher percentage. The composite material obtained is easy to process and it's use is feasible for the confection of printed circuit boards, considering it's mechanical, thermal and insulative properties

Confecção e montagem do set-up ortodôntico

Diagnosis and planning stages are critical to the success of orthodontic treatment, in which the orthodontist should have many elements that contribute to the most appropriate decision-making. The orthodontic set-up is an important resource in the planning of corrective orthodontics therapy. It consists of the repositioning of the teeth previously removed from the study dental casts and reassembled on its remaining basis. When properly made, the set-up allows a three-dimensional preview of problems and limitations of the case, assisting in decision-making regarding tooth extractions in cases with problems of space, amount of anchorage loss extent and type of tooth movement, discrepancy of dental arch perimeter, discrepancy of inter-arch tooth volume, among others, indicating the best option for treatment. This paper outlines the most important steps for its confection, an evaluation system and its application in the preparation of orthodontic treatment planning.

Montagem e confecção do set up ortodôntico

Diagnosis and planning stages are critical to the success of orthodontic treatment, in which the orthodontist should have many elements that contribute to the most appropriate decision-making. The orthodontic set-up is an important resource in the planning of corrective orthodontics therapy. It consists of the repositioning of the teeth previously removed from the study dental casts and reassembled on its remaining basis. When properly made, the set-up allows a three-dimensional preview of problems and limitations of the case, assisting in decision-making regarding tooth extractions in cases with problems of space, amount of anchorage loss extent and type of tooth movement, discrepancy of dental arch perimeter, discrepancy of inter-arch tooth volume, among others, indicating the best option for treatment. This paper outlines the most important steps for its confection, an evaluation system and its application in the preparation of orthodontic treatment planning.

Necessidade de ancoragem do grupo A e o controle biomecanico da mola T pré-ativada por curvatura para o fechamento de espacos

Contemporary orthodontics has sought, beyond the esthetic, occlusal and functional goals, treatments even faster and with less visits to the orthodontist — especially in patients that require dental extractions in which the generated space becomes a nuisance. The segmented arch technic (SAT), by the use of a "T" loop spring, has provided such results within these requirements. Therefore, this study aimed to appraise and demonstrate the confection, activation and biomechanical control of "T" loop spring, in the group with high anchorage necessity (group A), for retraction of anterior teeth; as well as to present a case report, with high anterior retraction necessity, treated with "T" loop spring.

Microdureza e rugosidade superficial do esmalte submetido ao clareamento: uma revisão de literatura

The increasing importance of aesthetic in the Dentistry for the patients and the consumers brought a constant rise in the number of products and procedures to facilitate the confection of the dental bleaching. Concomitantly, thone was a sudden increase in the number of research and publications, in vitro and in vivo, about its possible adverse reactions. Through literature revision this study aims to verify the possible morphologic alterations of the submitted enamel and dentine with different bleaching agents making critical analysis of the results of the current research with relation to the study of the microhardness and superficial roughness.