Laboratory testes with quality data in Dentistry

In laboratory tests, just following the manufacturer’s instructions of materials or equipments may not be enough to obtain reliable data. Thus, intra and inter-examiners studies may be required. The aim of this study was to illustrate the application of the Intraclass Correlation Coefficient (r) in a study related to the color changing and hardness of composite resin conducted by two examiners. The color and hardness of 10 specimens of composite resin were evaluated by a colorimetric spectrophotometer and hardness tester, respectively, at two different times. Two trained examiners performed two measurements with an interval of one week. Specimens were stored in artificial saliva at 37±1ºC for 7 days. The Intraclass Correlation was used for analysis of intra and inter-examiner reproducibility. The intra-examiner reproducibility was 0.79, 0.44 and 0.76 for L, a and b color coordinates for the examiner 1 and 0.84, 0.23, 0.21 for examiner 2. For hardness, r-values were 0.00 and 0.23 for the examiner 1 and 2, respectively, showing unsatisfactory agreement on color and hardness evaluation for both examiners. It was noted that only the observation of protocol for use of equipment and examiners training were not sufficient to collect reliable information. Thus, adjustments in the experimental protocol were made and devices were produced to standardize the measurements. The reproducibility study was performed again. For examiner 1, values as 0.90, 0.59 and 0.79 were verified for L, a and b coordinates and, for examiner 2 were obtained values of 0.90, 0.75, 0.95. In relation to hardness, r-values of 0.75 and 0.71 were obtained for examiners 1 and 2, respectively. The inter-examiner reproducibility was 0.86, 0.87, 0.91 for L, a and b coordinates and 0.79 for hardness. It was concluded that intra and inter-examiner calibration is essential for obtaining quality measurements in laboratory tests.

Visualisation and reconstruction in dentistry

Visualisation in the field of dentistry has nor, thus far, reached the same development as other medical fields. Potential applications of visualisation techniques in this area, however, are many, ranging from educational displays to training for delicate procedures. This paper reports on the investigation of techniques for handling three-dimensional models of teeth, aiming at investigation of dental structures. An algorithm was implemented for this purpose, which reconstructs three-dimensional teeth models from two-dimensional contour slices. Results employing various data sets are presented, including the output of VRML models for exploration.

Cadmium stress antioxidant responses and root-to-shoot communication in grafted tomato plants

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sexual haressement in dentistry: prevalence in dental school

OBJECTIVE: Sexual harassment is unlawful in all work and educational environments in most nations of the world. The goals of this study were to describe the sexual harassment prevalence and to evaluate the experiences and attitudes of undergraduate students in one dental school in Brazil. MATERIAL AND METHODS: An 18-item questionnaire was administered to 254 dental students with a completion rate of 82% (208). Students were requested to respond to questions about their background and academic level in dental school, their personal experiences with sexual harassment and their observation of someone else being sexually harassed. Bivariate statistical analyses were performed. RESULTS: Fifteen percent of the students reported being sexually harassed by a patient, by a relative of a patient or by a professor. Male students had 3 times higher probability of being sexually harassed than female student [OR=2.910 (1.113-7.611)]. Additionally, 25.4% of the students reported witnessing sexual harassment at the school environment. The majority of students did not feel professionally prepared to respond to unwanted sexual behaviors. CONCLUSION: These findings demonstrate that sexual harassment can occur in a dental school setting. There is a need for ongoing sexual harassment education programs for students and university staff. Increased knowledge of sexual harassment during graduation can better prepare dental professionals to respond to sexual harassment during their practice.

Qualitative methodogy: revealing a new path for research in dentistry

Currently, it is easy to find health professionals who not only attach importance to qualitative methods, but also recognize their help to better understand their patients' lives. However, its use in dentistry is still incipient, either due to ignorance or because of technical / operational difficulties in identifying possibilities for their use in research. Thus, the purpose of this study was to review the literature on the characteristics and peculiarities of the qualitative methodology, demonstrating their techniques of collecting, recording and analyzing data. For this, we performed a descriptive literature, from a survey in the "LILACS", "BBO" and "PUBMED" databases, by keywords related to the theme, selecting only the papers that mentioned the "importance" of qualitative research, the "characteristics and fundamentals," and the "techniques of collecting, recording and data analysis" involving this methodology. It was found that all studies have highlighted the importance of qualitative research to the construction of new knowledge that cannot be achieved by quantitative data. We found many different techniques to gather, record and analyze qualitative data applied to the dentistry field. It was concluded that qualitative research represents a new path to be followed by dentistry, so that we are able to plan actions in ethical and humane public health dentistry, bringing better results to the population, because of the depth of knowledge that your date can.

The affective-emotional communication in shoppingscapes: case study

Shoppingscapes on urban roads, such as streets and avenues, require study and more specific attention. You must be aware of the emotional communication, an important factor with regard to the influence on the perception and acquisition process by the observer. Reaching the consumer cognitively, arousing emotion and desire to want to have the observed object is one of the goals of emotional communication, and that only happens with the proper use of elements of perception. This paper aims to highlight the need for interdisciplinary design and architecture, especially in the case of shoppingscapes in open spaces that sell fashion items. The case study raises a reflection on the elements of perception in the windows as to whether they are being clearly communicated. It also discusses how the same are interfering or being interfered by the shoppingscapes of Avenida da Liberdade in Lisbon.

Considerações acerca do preparo ortodôntico direcionado à cirurgia ortognática

This work aims at contributing to increase and improve the communication between orthodontists and maxillofacial surgeons, reviewing and discussing the principles of diagnosis and orthodontic movement specific to patients with surgical indication. It describes the elective points in the conduct of the orthodontist so that their decisions could lead to an individualized and appropriate planning, striving for excellence in terms of outcomes for the surgical-orthodontic treatment of dentofacial discrepancies.

Dentistry in Brazil: Its History and Current Trends

The objectives of this article are to provide a short history of dentistry and dental education in Brazil and to analyze the nature of its development to date. The databases consulted are those provided by the Brazilian Federal Council of Dentistry, Brazilian Ministry of Health, Brazilian Ministry of Education, National Institute of Studies and Educational Research Anisio Teixeira, and Brazilian Institute of Geography and Statistics. Formal dental education in Brazil started in the late nineteenth century with the creation of courses annexed to existing schools of medicine in Rio de Janeiro and Bahia. Today, there are 191 institutions of higher education nationwide granting degrees in dentistry (137 private [71.7 percent] and fifty-four public [28.3 percent]), with a total of 17,157 student positions offered annually. These schools graduate around 10,000 professionals per year-one of the highest rates in the world. Both the distribution of schools of dentistry and of dentists varies among the regions of the country, with the greatest concentrations in major metropolitan centers with high population density, resulting in limited coverage in the more deprived regions. A review of epidemiological data for oral health and distribution of dentists in Brazil indicates that there is a lack of systematic planning for the allocation of the dental workforce and a lack of consideration of regional needs in the development of dental training programs in Brazil today.

Dentistry scientometric analysis: A comparative study between Brazil and other most productive countries in the area

This research aims at performing a comparative study between the Brazilian scientific production in Dentistry, from 2000 to 2009 and countries that contribute with at least 2 % of the world's scientific production indexed in the Scopus database. More specifically, we intend to assess the annual Brazilian scientific production by comparing it to the other countries', analyze the Brazilian and other countries' publications in journals with higher impact factors, as well as to highlight the scientific production from these countries and its international visibility, measured by its total and by its average of citations and normalized citation index per year, by comparing the countries, and to compare the index h of such countries. As work procedure, the SCImago Journal and Country Rank was used as source, identifying the group of producing countries in the Dentistry area from 1996 to 2009. From a total of 136 countries, 13 were highlighted as the most productive, each one of them accounting for at least 2 % the worldwide scientific production in the area. The following indicators were raised for each country: number of produced documents, total of citations, self-citations, average of citations per document and index h. We verified that Brazil is the only country in Latin America that is pictured among the most productive ones in the Dentistry area. We observed that Brazil presents a growing visibility and impact in the international scenery, what suggests that its production is constantly consolidating, with Brazilian scientific recognition in the main vehicles of dissemination in the area. © 2012 Akadémiai Kiadó, Budapest, Hungary.

A contribuition to the study of channel coding in wireless communication systems

Pós-graduação em Engenharia Elétrica - FEIS

Organizational communication and innovation in micro and small companies: a study on the application of the Innovation Radar

This paper is a study on corporate communication and the ability to innovate in small businesses. The guiding question seeks to respond whether organizational communication is able to make progress and / or support innovation in micro and small companies, and the main objective is to analyze the relationship between innovation and organizational communication. It was applied the case study method and document research for interpreting a diagnosis instru- ment called “Innovation Radar” in a small business company located in the countryside of São Paulo state. The diagnosis is made based on assessment dimensions aimed at checking the maturity and the degree of innovation in micro and small companies. By evaluating these di- mensions it was possible to build analytical frameworks and highlight the influence of corporate communication in promoting innovation. The results indicate that every dimension of the “In- novation Radar” can improve their performance by means of corporate communication.

Biocompatibility in vitro tests of mineral trioxide aggregate and regular and white Portland cements

Mineral trioxide aggregate (MTA) and Portland cement are being used in dentistry as root end-filling materials. However, biocompatibility data concerning genotoxicity and cytotoxicity are needed for complete risk assessment of these compounds. In the present study, genotoxic and cytotoxic effects of MTA and Portland cements were evaluated in vitro using the alkaline single cell gel (comet) assay and trypan blue exclusion test, respectively, on mouse lymphoma cells. The results demonstrated that the single cell gel (comet) assay failed to detect DNA damage after a treatment of cells by MTA and Portland cements for concentrations up to 1000 mu g/ml. Similarly, results showed that none of the compounds tested were cytotoxic. Taken together, these results seem to indicate that MTA and Portland cements are not genotoxins and do not induce cellular death.

Evaluation of genetic damage in human peripheral lymphocytes exposed to mineral trioxide aggregate and Portland cements

Mineral trioxide aggregate (MTA) and Portland cement are being used in dentistry as root-end-filling material for periapical surgery and for the sealing of communications between the root canal system and the surrounding tissues. However, genotoxicity tests for complete risk assessment of these compounds have not been conducted up to now. In the present study, the genotoxic effects of MTA and Portland cements were evaluated in peripheral lymphocytes from 10 volunteers by the alkaline single cell gel (comet) assay. The results pointed out that the single cell gel (comet) assay failed to detect the presence of DNA damage after a treatment of peripheral lymphocytes by MTA and Portland cements for concentrations up to 1000 mu g mL(-1). In summary, our results indicate that exposure to MTA or Portland cements may not be a factor that increases the level of DNA lesions in human peripheral lymphocytes as detected by single cell gel (comet) assay.