Benefícios dos relatórios de sustentabilidade na competitividade e melhoria da gestão empresarial: estudo de caso do setor automotivo

The increase of the world population and their consumption power requires companies to increase their production capacity to meet demand. This production process is often performed without control and degrades the environment. In view of the stiffness of the legal requirements and the increasing of environmental concerns, companies need to act in a sustainable way to continue existing. The main objective of this study is to investigate how sustainability reports that follow the guidelines of the Global Reporting Initiative (GRI) can bring benefits to companies in the continuous improvement of its processes and the competitiveness of the sector. The sector chosen for the study was the automotive industry, due to its importance in the national economy and the significant impacts caused to the population and to the environment. The methodology consists of reading the GRI sustainability reports of companies and then performing a comparison among them and the bibliography of the subject. The results confirm the importance of the GRI sustainability reporting for companies and show how the selected indicators can contribute to the corporate management and to the control of its processes

Estudo de tempos e métodos em uma microempresa prestadora de serviços de usinagem mecânica

This paper aims to survey data to analyze the productive capacity of a machining process of rolling bearings by methods-time measurement, in order to identify its bottlenecks and propose improvements in the system. The production times at the company are not known, the method of separation of operations and identification of its activities and the timing of production times and setup become points of departure for this paper. The results from this method of analysis provide clarity in identifying system weaknesses and by them it was possible to carry out the proposals for improvement in some process steps. The implementation of the improvements was not performed, but with the goals of this work was made possible to raise relevant information of the analyzed system

Pesquisa-ação sobre o uso de indicadores de desempenho do equipamento em uma fábrica de geradores

In the industrial environment the challenge is use better the productive resources: people and machine. The following work has the main goal improve the efficient losses analysis in the stator bar’s production bottleneck equipment situated in the Electric generator’s factory. The action research involved Theory of Constraints on the restriction system identification and developed the data collection framework by losses typology for indicator measurement. The research showed the data collection standardization importance to obtain reliable data and strategic efficiency indicator to optimize equipments. Besides of this, OEE and TEEP indicator demonstrated efficiency results to analyze the actual efficiency when the machine works and the increase capacity opportunity to treat the hide costs in the organization following the continuous improvement

Avaliação da produtividade no trabalho organizado em turnos em uma empresa vidreira

Work organized in shifts, either for technological, social or economic imposition, allows the best use of means of production, increasing the overall productivity of the enterprises. At the same time, this type of work harms the individual productive capacity of workers, particularly those involved in the night shift. The objective of this work was to assess the behaviour of production in a continuous line and subjected to work organized in shifts. Through the statistical method of analysis of variance, Spearman's test and Tukey's method, was analysed the distribution of the productivity index measured in three fixed shifts of work in a glass company. The productivity index, provided by the integrated management system of the company, refers to the ratio of actual productivity to total productivity. The statistical analysis shows that factors of production, such as allocation of workers, do not interfere with productivity, showing an unexpected pattern, where the average productivity for the three shifts are close and the correlation between the number of workers on the line and productivity is low. The conditions of production had an adverse work environment with exposure to noise, heat, vaporized mist of lubricating oil and risk of accidents. The findings show that the calculation of productivity in use is limited and its use in company’s production control may produce distortions. It is proposed to examine alternative calculations methods that consider the overall productivity

Avaliação de genótipos de cártamo quanto ao desempenho agronômico, divergência genética e produtividade da água

Pós-graduação em Agronomia (Agricultura) - FCA

Aplicação da distribuição de poisson para determinação de estoque mínimo de itens de MRO de baixo giro aplicados em manutenção de ativos industriais

Pós-graduação em Engenharia de Produção - FEB

Artesanato como exemplo de trabalho informal em uma região econômica periférica: uma análise geográfica do aglomerado produtivo de palhas e bordados da região norte do Piauí

Pós-graduação em Geografia - IGCE

Parâmetros geotécnicos e previsão da capacidade de carga de estacas apiloadas em solo tropical arenoso obtidos com o Pressiômetro Ménard

This paper presents and discusses Ménard Pressuremeter test results used to predict bearing capacity of pounded piles installed in a tropical sandy soil. Fifteen pre-bored pressuremeter tests were carried out at the Experimental Research Site from Unesp - Bauru up to 15 m depth, one test per meter. Several laboratory and in situ tests were carried out in this research site as well as load tests on plates and on piles. Pressuremeter test results were firstly analyzed to determine geotechnical soil parameters based on empirical methods, emphasizing the estimative of the earth pressure coefficient at rest (K0). After that, bearing capacity prediction of pounded piles with 4 m, 7 m and 10 m were made and compared with test results from instrumented load tests. Pressuremeter test results allowed a very good estimative of bearing capacity for the pile with 4 m length and underestimated in 25,7% and 20,0% the bearing capacity for the pile with 7 and 10 m length, respectively. The back analysis of the test results suggests that the appropriate value for the bearing capacity factor for the tested soil-pile system on this soil is equal to 2.

Influência da aplicação de vinhaça na capacidade de Infiltração de um solo de textura franco arenosa

The objective of this study was to analyze effects in different depth in soil water infiltration and to verify the Horton and Kostiakov-Lewis models adequacy in infiltration rate estimate. The treatments were five doses of vinasse (0, 200, 250, 300 and 350 m3?ha1?. The vinasse application reduced the soil erosion risk increasing the possibility of runoff. The Horton model had the best adjustment on the observed data, and the Kostiakov-Lewis model overestimated the infiltration rate values.

Suscetibilidade magnética do solo e estimação da capacidade de suporte à aplicação de vinhaça

The objective of this work was to evaluate the magnetic susceptibility efficiency for estimating the support capacity of areas for vinasse application. Two hundred forty-one soil samples were collected from a 380-ha area, on which soil chemical properties, clay content, and magnetic susceptibility were determined. Vinasse requirement was calculated for each sample. Data were subjected to descriptive statistical analysis, and regression models were developed between magnetic susceptibility and the other evaluated attributes. The analysis of data spatial dependence was performed using geostatistics. Kriging maps and cross variograms were built in order to investigate the spatial correlation between soil magnetic susceptibility and studied attributes. Based on the map of vinasse requirement, on the soil classes, and on the kriging map, calculations were done for average vinasse dose and average soil support capacity, weighted by the area. Magnetic susceptibility has significant linear spatial correlation with recommended vinasse doses and soil support capacity for the application of this effluent, and it can be used as a pedotransfer function for indirect quantification of soil support capacity.

Mucorales de solo contaminado com metais pesados na região do pólo cerâmico de Santa Gertrudes, SP: ocorrência e capacidade de biossorção de chumbo e zinco

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC

Matéria orgânica, capacidade de troca catiônica e acidez potencial no solo com dezoito cultivares de cana-de-açúcar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Classes de capacidade de uso do solo da bacia hidrográfica da Serra da Mantiqueira - UGRI 1

Pós-graduação em Engenharia Civil e Ambiental - FEB

Avaliação da construção e operação de técnicas compensatórias de drenagem urbana: o transporte de finos, a capacidade de infiltração, a taxa de infiltração real do solo e a permeabilidade da manta geotêxtil

This work aimed to evaluate some aspects of construction and operation of full-scale best management practices and their effects on infiltration loading rate. Two systems were studied: i) filter-swale-trench (FST) and ii) infiltration well (IW). In these units, field essays and full-scale measurements were made in order to assess the soil permeability. Further, the fine particles transportation and the geotextile blanket permeability were determined before and after operation. The results pointed out that there were soil transportation to inside the FST and IW systems, despite of the installed protections, and that these material were responsible for diminishing the geotextile (reduction from 30 to 90% for FST and 40 to 70% for IW) and the full-scale infiltration loading rates (varying from 4,7 x 10-6 to 10-5 m.s-1).

Capacidade de suporte de carga de Latossolo Vermelho cultivado com cana-de-açúcar e efeitos da mecanização no solo

The objective of this work was to determine the load support capacity (LSC) of an Oxisol and, through compressibility models, relate it to wheel-soil interactions under management systems with one and three sugarcane crop cycles, with mechanized harvest. LSC evaluations were carried out on undisturbed soil samples, collected at planting row and bed, in four layers: 0.00-0.10, 0.10-0.20, 0.20-0.30, and 0.300.40 m. The contact area between wheels and soil was determined in order to estimate the contact pressure by agricultural machinery on the soil. Pre-consolidation pressures were used to determine LSC. The system with three cycles showed higher LSC than the system with only one cycle. The load support capacity of the soil evaluated in the range of friability is greater than the contact pressures applied to the soil by the wheels of the studied agricultural machines.