Method for the evaluation of insecticidal activity over time in Atta sexdens rubropilosa workers (Hymenoptera: Formicidae)

The active ingredients used in the formulation of toxic baits for leaf-cutting ants (Hymenoptera: Formicidae) should possess a delayed action defined as an insecticidal activity whereby worker mortality is ≤15% at 24 hours and ≥90% at 21 days. Serious shortcomings have occurred in the search for new active ingredients, such as the initial selection of fenoxycarb, copper oxychloride and diflubenzuron, compounds considered very promising but whose inefficiency was verified only later, indicating methodological problems. In view of this situation, we developed a classification method for insecticidal activity over time using workers of the leaf-cutting ant Atta sexdens rubropilosa Forel. The insecticides used were fipronil, sulfluramid GX071HB and sulfluramid GX439, vehicled in an attractive pasty formulation prepared based on citrus pulp. The results obtained were consistent from a toxicological viewpoint and agreed with the literature in terms of the control of colonies. Sulfluramids were found to possess a delayed action at a broad range of concentrations, in agreement with the fact that these substances are highly effective in the control of all leaf-cutting ant species. The smaller range of concentrations of fipronil with delayed action is probably related to its lower efficacy for species more difficult to control such as Atta capiguara (Forti et al. 2003). We discuss the importance of relating behavioral particularities to the specific feeding habits of leaf-cutting ants, with methodological adequacy of the assessment of insecticides aimed at toxic baits.

Erosão hídrica de Latossolo Vermelho muito argiloso relevo ondulado em área de pós-plantio de eucalipto no Vale do Rio Doce, região Centro Leste do Estado de Minas Gerais

The erosion caused by running water constitutes important cause of environmental degradation and productivity reduction, which justifies its evaluation in areas of eucalypt commercial plantations, mainly in ondulated slope conditions. The present study was intended to evaluate the influence of different management systems, in an undulated eucalypt pos-planting area, upon soil and water losses by erosion. The experiment was installed in a very clayey Red Latosol (Oxisol) under three eucalypt management systems (downhill planting with burning of crop residues - EDq; downhill planting with maintenance of crop residues on soil surface - ED; level planting with maintenance of crop residues on soil surface - EN), native forest (FN), bare soil (SD), and native pasture (PN). The soil and water losses evaluations were performed in standard plots installed in the field. All eucalypt systems presented very low values of soil losses in relation to the established tolerance limit, indicating the adequacy of these management systems concerning water erosion. The sustainability of these environments regarding erosion is indicated by the fact that soil losses in eucalipt were very close to those observed in native forest (reference).

Radiopacity of restorative materials using digital images

The radiopacity of esthetic restorative materials has been established as an important requirement, improving the radiographic diagnosis. The aim of this study was to evaluate the radiopacity of six restorative materials using a direct digital image system, comparing them to the dental tissues (enamel-dentin), expressed as equivalent thickness of aluminum (millimeters of aluminum). Five specimens of each material were made. Three 2-mm thick longitudinal sections were cut from an intact extracted permanent molar tooth (including enamel and dentin). An aluminum step wedge with 9 steps was used. The samples of different materials were placed on a phosphor plate together with a tooth section, aluminum step wedge and metal code letter, and were exposed using a dental x-ray unit. Five measurements of radiographic density were obtained from each image of each item assessed (restorative material, enamel, dentin, each step of the aluminum step wedge) and the mean of these values was calculated. Radiopacity values were subsequently calculated as equivalents of aluminum thickness. Analysis of variance (ANOVA) indicated significant differences in radiopacity values among the materials (P<0.0001). The radiopacity values of the restorative materials evaluated were, in decreasing order: TPH, F2000, Synergy, Prisma Flow, Degufill, Luxat. Only Luxat had significantly lower radiopacity values than dentin. One material (Degufill) had similar radiopacity values to enamel and four (TPH, F2000, Synergy and Prisma Flow) had significantly higher radiopacity values than enamel. In conclusion, to assess the adequacy of posterior composite restorations it is important that the restorative material to be used has enough radiopacity, in order to be easily distinguished from the tooth structure in the radiographic image. Knowledge on the radiopacity of different materials helps professionals to select the most suitable material, along with other properties such as biocompatibility, adhesion and esthetic.

Peritoneal dialysis in acute renal failure

The definition of adequate dialysis in acute renal failure (ARF) is complex and involves the time of referral to dialysis, dose, and dialytic method. Nephrologist experience with a specific procedure and the availability of different dialysis modalities play an important role in these choices. There is no consensus in literature on the best method or ideal dialysis dose in ARF. Peritoneal dialysis (PD) is used less and less in ARF patients, and is being replaced by continuous venovenous therapies. However, it should not be discarded as a worthless therapeutic option for ARF patients. PD offers several advantages over hemodialysis, such as its technical simplicity, excellent cardiovascular tolerance, absence of an extracorporeal circuit, lack of bleeding risk, and low risk of hydro-electrolyte imbalance. PD also has some limitations, though: it needs an intact peritoneal cavity, carries risks of peritoneal infection and protein losses, and has an overall lower effectiveness. Because daily solute clearance is lower with PD than with daily HD, there have been concerns that PD cannot control uremia in ARF patients. Controversies exist concerning its use in patients with severe hypercatabolism; in these cases, daily hemodialysis or continuous venovenous therapy have been preferred. There is little literature on PD in ARF patients, and what exists does not address fundamental parameters such as adequate quantification of dialysis and patient catabolism. Given these limitations, there is a pressing need to re-evaluate the adequacy of PD in ARF using accepted standards. Therefore, new studies should be undertaken to resolve these problems. Copyright © Informa Healthcare.

Usage of enterprise modeling processes and information systems design to forecast demand

Managing the great complexity of enterprise system, due to entities numbers, decision and process varieties involved to be controlled results in a very hard task because deals with the integration of its operations and its information systems. Moreover, the enterprises find themselves in a constant changing process, reacting in a dynamic and competitive environment where their business processes are constantly altered. The transformation of business processes into models allows to analyze and redefine them. Through computing tools usage it is possible to minimize the cost and risks of an enterprise integration design. This article claims for the necessity of modeling the processes in order to define more precisely the enterprise business requirements and the adequate usage of the modeling methodologies. Following these patterns, the paper concerns the process modeling relative to the domain of demand forecasting as a practical example. The domain of demand forecasting was built based on a theoretical review. The resulting models considered as reference model are transformed into information systems and have the aim to introduce a generic solution and be start point of better practical forecasting. The proposal is to promote the adequacy of the information system to the real needs of an enterprise in order to enable it to obtain and accompany better results, minimizing design errors, time, money and effort. The enterprise processes modeling are obtained with the usage of CIMOSA language and to the support information system it was used the UML language.

Reliability assessment of energy limited systems using sequential montecarlo simulation

This paper explains why the reliability assessment of energy limited systems requires more detailed models for primary generating resources availability, internal and external generating dispatch and customer demand than the ones commonly used for large power systems and presents a methodology based on the full sequential Montecarlo simulation technique with AC power flow for their long term reliability assessment which can properly include these detailed models. By means of a real example, it is shown how the simplified modeling traditionally used for large power systems leads to pessimistic predictions if it is applied to an energy limited system and also that it cannot predict all the load point adequacy problems. © 2006 IEEE.

Dual path: A concept to improve the esthetic replacement of missing anterior teeth with a removable partial denture

The dual path of insertion concept for removable partial denture (RPD) design may be used in esthetically demanding situations. When compared to conventional RPDs, the main advantage of this design is the minimal use of clasps. This clinical report describes the treatment of a patient with an anterior maxillary edentulous area using a dual path RPD. The diagnostic cast was surveyed to ensure the adequacy of the undercuts on the mesial surfaces of the anterior abutments, where rigid minor connectors were placed. Inverted V-shaped canine cingulum rest seats were prepared to provide resistance to tooth movement during function. The dual path RPD concept allows excellent esthetic results, minimizes tooth preparation, and reduces the tendency toward plaque accumulation in a Kennedy class IV partially edentulous arch. © 2008 by The American College of Prosthodontists.

Planejamento agrícola e implantação de sistema de cultivo de cana-de-açúcar com auxílio de técnicas geoestatísticas

Sugarcane is one of the most important crops of the Brazilian agribusiness and this importance justifies the use of techniques that allow the implementation of cultivation systems capable of reducing the variability of soil characteristics and the establishment of efficient agricultural planning. The aim of the present work was the planning and implementation of cultivation systems for sugarcane using geostatistical techniques, in the Pereira Barreto region, SP. An area of 505 ha was mapped using the global positioning system (GPS) and a Digital Elevation Model was elaborated (MDE). Soil samples were collected for 0-0.25 m depth, in each 7 ha, for their chemical attributes and texture characterization. Data were analyzed by descriptive statistics and geostatistics. The determination of the spatial distribution of soil granulometric and chemical attributes allowed the allocation of the studied sugarcane varieties according to soil fertility and clay content. The kriging maps of soil granulometric and chemical attributes brought useful information to the establishment of production environments with different soil and crop managements. The identification of different environments by means of geostatistical techniques allowed the precise planning of the sugarcane cultivation, as well as the adequacy of fertilization practices and the allocation of suitable sugarcane varieties adapted to the conditions imposed by differences in the soil attributes.

Influência da aplicação de vinhaça na capacidade de Infiltração de um solo de textura franco arenosa

The objective of this study was to analyze effects in different depth in soil water infiltration and to verify the Horton and Kostiakov-Lewis models adequacy in infiltration rate estimate. The treatments were five doses of vinasse (0, 200, 250, 300 and 350 m3?ha1?. The vinasse application reduced the soil erosion risk increasing the possibility of runoff. The Horton model had the best adjustment on the observed data, and the Kostiakov-Lewis model overestimated the infiltration rate values.

Comparação entre as necessidades energéticas prescritas e administradas a pacientes em terapia nutricional enteral

Objective: evaluating the adequacy, prescription and energy supply of enteral nutrition therapy in hospitalized patients. Methods: was performed a retrospective survey of the evolution of TNE protocol of 59 patients hospitalized in a general hospital in Marília / SP / BR. Data collected included gender, age, clinical diagnosis, anthropometric and dietary data related to the prescribed dietary formula, route and method of administration of the enteral nutrition, the daily volume prescribed and administered, the daily amount of energy required and offered in the diet, as well as possible complications. Body mass index (BMI), triceps skinfold (TSF) and arm muscle circumference (AMC) were used to establish the nutritional status of the patients. The adequacy of ENT was done according to the daily energy requirement compared to the average energy received during the daily use of ENT. Results: The average found to the BMI was 21.4 kg/m 2, and no differences were found comparing male and female. The data for TSF and AMC were different between genders (p<0.05) and suggest a more severe muscle mass in relation to adipose tissue. The averaged to the energy requirements was 1642 kcal/day but the average of energy prescribed was 1045 kcal/day and the amount offered was 1035 kcal/day. There was a significant difference between the necessity and the supplied energy offered through enteral nutrition (p=0.00) as well between the energy required and prescribed (p =0.00), both were shorter than the necessity. There was no significant difference (p>0.05) in energy supply, volume of enteral nutrition prescribed and administered among eutrophic, underweight or overweight patients. Conclusion: The results of this study indicate that the prescription and energy supply were not based on the needs of these patients, causing a significant energy deficit, which can lead to worsening of the nutritional status of the same. In hospitalized patients in use of ENT, the energy requirement must be made by a qualified professional within the multidisciplinary team, based on the needs of each patient.

Web system to aid project management

This work describes a new web system to aid project management that was created to correct the principal deficiencies identified in systems having a common purpose which are at present available, as well as to follow the guidelines that are proposed in the Project Management Body of Knowledge (PMBoK) and the quality characteristics described in the ISO/IEC 9126 norm. As from the adopted methodology, the system was structured to attend the real necessities of project managers and also to contribute towards obtaining quality results from the projects. The validation of the proposed solution was done with the collaboration of professionals that used the functions available in it for a period of 15 days. Results attested to the quality and adequacy of the developed system.

Brazilian solar water heating systems evaluation

The Brazilian National Electricity Conservation Program - PROCEL - runs regular surveys in the electric-energy-consumption market. These studies are used as valuable data to better plan the actions of this program. These data also evaluate the program's performance by identifying the level of penetration of the most efficient electric equipment within the residential sector. PROCEL's main lines of action is to promote and make available the most efficient technologies. Based on the results from the latest survey, it is estimated that 24% of the electric-energy consumption of the residential sector is used by electric shower devices, which instantaneously heat the water that flows through them, normally using an electric resistance of 5 kW. These are an important factor in a country where electric-heating devices are present in about 73% of Brazilian households. Keeping that in mind, the purpose of this work is to present the main results of the Brazilian Solar-Water-Heating-Systems Evaluation, finished in 2010, where 535 installations were visited and more than 50 researchers from different universities participated in the project. Moreover, seven Brazilian cities were selected to be studied. The information was collected from field research and statistically treated. The collected information focused on the adequacy of the project to the household, installation, operation and life cycle of the systems, as well as the users' satisfaction level. Technical questionnaires were developed to summarize all the required information, such as a Web site designed to organize and manage the data collected and a Matlab application that performed the dimensioning and F-chart systems evaluation. Quality indicators were created through a full system monitoring, with thermographic analysis and evaluation of shading influence at the system's efficiency, using the Ecotect software.

Risk factors for low birth weight in Botucatu city, SP state, Brazil: A study conducted in the public health system from 2004 to 2008

Background: Low birth weight (LBW), defined as birth weight less than 2500 g, has a complex etiology and may be a result of premature interruption of pregnancy or intrauterine growth restriction. The objective of this study was to provide information on determinants of LBW and contribute to the understanding of the problem in Brazil. Methods. A case-control study was conducted in Botucatu city, SP state, Brazil. The study population consisted of 2 groups with 860 newborns in each group as follows: low weight newborns (LWNB) and a control group (weight ≤ 2500 g). Secondary data from 2004 to 2008 were collected using the Live Birth Certificate (LBC) and records from medical charts of pregnant women in Basic Health Units (BHU) and in the Public University Hospital (UH). Variables were as follows: maternal socio-demographic characteristics, pregnancy and birth conditions including quality of prenatal care according to 3 criteria. They were based on parameters established by the Ministry of Health (MH), one of them, the modified Kessner Index. The multivariable analysis by logistic regression was used to evaluate the association between variables and LBW. Results: According to the analysis, the factors associated with LBW were as follows: prematurity (OR = 56.98, 95% CI 29.52-109.95), twin pregnancy (OR = 20.00, 95% CI 6.25-100.00), maternal smoking (OR = 2.12, 95% CI 1.33-3.45), maternal malnourishment (OR = 2.30, 95% CI 1.08-5.00), maternal obesity (OR = 2.30, 95% IC 1.18-4.48), weight gain during pregnancy less than 5 kg (OR = 2.63, 95% CI 1.35-5.00) and weight gain during pregnancy more than 15 kg (OR = 2.26, 95% CI 1.16-4.41). Adequacy of prenatal care visits adjusted to gestational age was less frequent in the LBW group than in the control group (68.7% vs. 80.5%, x 2 p < 0.001). According to the modified Kessner Index, 64.4% of prenatal visits in the LWNB group were adequate. Conclusion: LWNB are a quite heterogeneous group of infants concerning their determinants and prevention actions against LBW and the follow-up of these infants have also been very complex. Therefore, improvement in the quality of care provided should be given priority through concrete actions for prevention of LBW. © 2012 Fonseca et al; licensee BioMed Central Ltd.

The evaluation of an instrument for pediatric oncology patient classification

The objectives of this study were to assess the interrater reproducibility of the instrument to classify pediatric patients with cancer; verify the adequacy of the patient classification instrument for pediatric patients with cancer; and make a proposal for changing the instrument, thus allowing for the necessary adjustments for pediatric oncology patients. A total of 34 pediatric inpatients of a Cancer Hospital were evaluated by the teams of physicians, nurses and nursing technicians. The Kappa coefficient was used to rate the agreement between the scores, which revealed a moderate to high value in the objective classifications, and a low value in the subjective. In conclusion, the instrument is reliable and reproducible, however, it is suggested that to classify pediatric oncology patients, some items should be complemented in order to reach an outcome that is more compatible with the reality of this specific population.

Onboard and real-time artificial satellite orbit determination using GPS

An algorithm for real-time and onboard orbit determination applying the Extended Kalman Filter (EKF) method is developed. Aiming at a very simple and still fairly accurate orbit determination, an analysis is performed to ascertain an adequacy of modeling complexity versus accuracy. The minimum set of to-be-estimated states to reach the level of accuracy of tens of meters is found to have at least the position, velocity, and user clock offset components. The dynamical model is assessed through several tests, covering force model, numerical integration scheme and step size, and simplified variational equations. The measurement model includes only relevant effects to the order of meters. The EKF method is chosen to be the simplest real-time estimation algorithm with adequate tuning of its parameters. In the developed procedure, the obtained position and velocity errors along a day vary from 15 to 20 m and from 0.014 to 0.018 m/s, respectively, with standard deviation from 6 to 10 m and from 0.006 to 0.008 m/s, respectively, with the SA either on or off. The results, as well as analysis of the final adopted models used, are presented in this work. © 2013 Ana Paula Marins Chiaradia et al.